Vertical machining center

Deckel Maho 835V

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 Kdjdpfx Asx R Em Dektol T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm Kdjdpfovuun Tjx Aktjl

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system Ksdpoyxxyysfx Aktodl - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof Ksdpfeyrd Hwsx Aktjdl • New Spindle Bearings Machine Benefits Technical Machine Benefits • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Kodpobh Ubwefx Aktsdl mandrel Ø: 508 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Kdedpfx Akeyaywbstjl Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Ksdpfxjv H Dgpo Aktedl

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Kdsdpfx Ajwm Rqaektjl Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Kodpoxxpcvefx Aktodl Tool holder: SK40 Weight: approx. 4,500kg Operating hours: 9,521h Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,000 h, functionality: fully functional, travel distance X-axis: 800 mm, rapid traverse X-axis: 800 m/min, rapid traverse Y-axis: 500 m/min, rapid traverse Z-axis: 500 m/min, For sale: DMC835V Kitagawa rotary table, controllable via MAC Mini through M-code function. The mounted collet chuck is NOT included, but a 3-jaw chuck is supplied. No internal coolant supply (IKZ) No chip conveyor Electronic handwheel 20-position tool changer Includes 20 SK40 tool holders Loaded free on truck Sinumerik 840D Kjdpfx Akoxur Akstsdl SK40 taper 8000 rpm spindle No vices Approx. 9000 spindle hours

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Kdodpev S Svvsfx Aktjl