Hydr. three-roll round bending machine

DAVI MCO 3050 x 30/25 mm

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW Csdpjxau D Ijfx Aa Eegp

Year of construction: 2009, condition: good (used), Load capacity: 30 t Cgjdpfxeqiz N Rj Aa Esp Fine lift Lifting height 9 meters

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Cgjdpoh A Sfdefx Aa Eep Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,728 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 149,000 W, bar diameter (max.): 64 mm, controller manufacturer: HAAS, controller model: NGC, number of slots in tool magazine: 12, swivel angle C-axis (max.): 360 °, number of axes: 4, This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. • Chuck size: 210 mm • Maximum part length: 533 mm • Maximum turning diameter: 298 mm • Maximum turning length: 572 mm • Spindle bore capacity: 64 mm • Axis travels: • X-axis: 213 mm • Y-axis: ±51 mm • Z-axis: 572 mm • Spindle nose: A2-6 Additional equipment • Driven tools • C-axis • ATP – Automatic tool probe • PTS – Hydraulically controlled tailstock • CONVEYOR – Chip conveyor Codpfsx D Hn Tsx Aa Eegp Technical Specification Driven Tools Yes

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Codegmdnfepfx Aa Ejgp

Condition: used, Year of construction: 2010, Loading crane HIAB 1 EP-4 Year of manufacture 2010 4x hydraulically extendable 5th and 6th function Remote control Cevoman bv. Lenskensdijk 5 Cgsdpjwx Eu Rofx Aa Esp 2200 Herentals Belgium

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. Cgsdpfshzbipsx Aa Ejp - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Codpfx Aajg Dvfws Eogp Tooling: Customer choice Features:Included cap sorting as-is or adjusted to customer needs

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Cjdpjd Hxx Ajfx Aa Eegp Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, GÖCKEL G50 ELTT Precision grinding machine Year of manufacture: 2005 Magnetic table length: 4500 mm, width: 150 mm CNC controlled Cgjdpfev D Huqjx Aa Esp Operational