2050×12 mm - 3-roller hydraulic plate bending machine
CRONOSSTECH HSB 3R 2050X250

Name: CRONOSSTECH HSB 3R 2050X250
Brand: CRONOSSTECH
Availability: InStock

Year of construction

2025

Condition

New

Location

Turkey

2050×12 mm - 3-roller hydraulic plate bending machine CRONOSSTECH HSB 3R 2050X250

Machine data

Machine type:: 2050×12 mm - 3-roller hydraulic plate bending machine

Manufacturer:: CRONOSSTECH

Model:: HSB 3R 2050X250

Year of construction:: 2025

Condition:: new

Price & Location

Location:: İkitelli OSB, S6B Blok NO:113, 34490 Başakşehir/İstanbul, Türkiye

Call

Technical details

Control type:: NC control

Actuation type:: hydraulic

Number of rollers:: 3

Roller (bottom) diameter:: 250 mm

Roller (top) diameter:: 250 mm

Side roll diameter:: 200 mm

Roller length:: 2,050 mm

Sheet thickness (max.):: 12 mm

Details about the offer

Listing ID:: A19833935

Update:: 25.08.2025

Description

STANDARD EQUIPMENT
Steel construction main frames
Hydraulic upper roll opening head
Movable control panel
Centrally driven rolls powered by motor
Hydraulically adjustable rear and lower rolls
Precision bending with braked main motor
Conical bending and pre-bending system
Lower and upper roll drive by planetary gearbox
Rear roll ball support system to facilitate sheet movement
Compliance with EU safety directives
High-strength forged steel rolls made of SAE 1050 (CK45) certified steel
Hardened shafts
Digital readouts (2 units)
Fsdpfxow Slcte Alqegb
Operation manual

OPTIONAL EQUIPMENT
Overhead crane (elevator) for support in large diameter bending
Hydraulic side supports for assistance in large diameter bending
Ground and polished rolls
Wire grooves at shaft ends
NC control unit
Dual speed operation
Stepless speed adjustment
Ejector system
Hydraulic motor option

TECHNICAL SPECIFICATIONS
Bending Length: 2050 mm
Pre-bending: 8/10 mm
Bending Capacity: 10/12 mm
Upper & Lower Roll Diameter: 250 mm
Side Roll Diameter: 200 mm
Min. Bending Diameter: 375 / 1250 mm
Motor Power: 7.5 + 1.5 kW
Bending Speed: 5 m/min
Tank Capacity: 25 l
Length: 4000 mm
Width: 1200 mm
Height: 1370 mm
Weight: 4200 kg

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2024

150 listings online

Call

Send inquiry

Telephone & Fax

+90 212 5... show

These listings may also fit your interest.

Listing

Workshop press RHTC 100 TON M/H-M/C-2 Hydraulic Press

United Kingdom

18,624 km

Workshop press
RHTC100 TON M/H-M/C-2 Hydraulic Press

Call

Listing

Round bending machine OSTAS 4R OHS 2070 x 220

Enschede

18,485 km

Round bending machine
OSTAS4R OHS 2070 x 220

Call

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm Fjdor H Df Ispfx Alqogb - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

See details

Listing

Plate rolling machines DAVI MCO 2024 2008 DAVI MCO 2024

Wijchen

18,567 km

Plate rolling machines DAVI MCO 2024 2008
DAVIMCO 2024

€23,500

Fixed price plus VAT

Call

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) Fjdpfexdigfex Alqegb - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

See details

Listing

Rolls bending machine - 3 Rolls DAVI MCO 2020

Ahaus

18,488 km

Rolls bending machine - 3 Rolls
DAVIMCO 2020

Call

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter Fedpfxsxacdvo Alqegb voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

See details

Listing

Rolls bending machine - 3 Rolls AKBEND AS-M 90-10 / 3.0

Ahaus

18,488 km

Rolls bending machine - 3 Rolls
AKBENDAS-M 90-10 / 3.0

Call

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Fgjdpfew U U Udjx Alqjb Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

See details

Listing

Günzburg

18,561 km

Press brake
WEINBRENNERGP 160/3550

Call

Listing

Hydraulic four-roll bending machine FACCIN 4HEL 3100 x 16/12 mm

Kreuztal

18,529 km

Hydraulic four-roll bending machine
FACCIN4HEL 3100 x 16/12 mm

Call

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW Fgodpfxoytr Rms Alqjb CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

See details

Listing

Niederlangen

18,411 km

Cold Circular Saw
MEPTIGER 350 SX

Call

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm Fodowvl E Repfx Alqjgb capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

See details

Listing

Plate rolling machine OSTAS 4R OHS 3070 x 320

Mudersbach

18,541 km

Plate rolling machine
OSTAS4R OHS 3070 x 320

Call

Condition: new, Ostas 4-roll plate bending machine 4R OHS 3070 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Fgodoxrdxfspfx Alqob Conical bending device Separate control panel Roll length: 3070 mm Top roll diameter: 320 mm Side roll diameter: 240 mm Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The pictures shown are for reference only.

See details

Listing

Brazil

12,234 km

Dual-purpose machine
BodorA3T 6000W

Call

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Fgjdpsh Hd Ddefx Alqeb Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

See details

Advertise here