Band saw machine 125mm

CORMAK BS-128HDRC 400V +2x M42 +5L Emulgol

Condition: new, capacity 90 degrees: round 240 mm Iaedpfx Aehpktvjg Iet capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Iaodpfoudi Uzex Ag Ijt Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: new, Year of construction: 2026, The CORMAK ZS-40B industrial geared pillar drill is a solid tool with great potential. Equipped with a height-adjustable swivel head, automatic threading device and a precision handwheel, it ensures flexibility and accuracy in work. The powerful engine guarantees high drilling efficiency, and the solid construction and hardened oil gear wheels ensure stability and durability. The drill comes with a set of threading holders, extending the capabilities of this professional tool. Additionally equipped with autofeed and cooling. Machine characteristics Very high work flexibility thanks to the swivel, height-adjustable head Cooling system L/R rotation, automatic threading device Precision handwheel with depth scale Hardened oil gear wheels High stability and quality of processed elements thanks to a solid base. Powerful motor ensuring good drilling performance. Rigid, thickened column with a polished surface Large turntable with height adjustment Possibility to set a vice Technical data DRILLING DIAMETER (CAST IRON/STEEL) 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE DISTANCE FROM THE COLUMN AXIS 260mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 754mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1270 mm SPINDLE TAPER MK4 SPINDLE SPEED 50 - 2520 rpm. NUMBER OF GEARS 6 FEED RANGES 0.12; 0.18; 0.25 mm/rev DIMENSIONS OF THE WORKTABLE SURFACE 354x575mm OVERALL HEIGHT 2120mm ENGINE POWER 1.5 kW POWER 400V/50Hz Iodpfx Aoridv Seg Ijat WEIGHT U 350kg

Condition: new, Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting area round 45°: 115 mm Iaedoilk E Depfx Ag Ist Cutting area flat 45°: 115 x 130 mm Cutting area round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m / min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw arm can be tilted up to 60 - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 tpi - Quick-clamping vice - Material stop - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: new, cutting diameter 220 mm saw band length 2450 mm cutting width 250 mm cutting speed 40 / 80 m/min dimensions of saw-band 2450 x 27 x 0,9 mm 100 mm 90 mm 90 x 90 mm 160 mm 160 x 110 mm 250 x 190 mm total power requirement 0,75 / 1,1 kW table height 925 mm Iaodelb I A Sepfx Ag Iet weight of the machine ca. 218 kg dimensions of the machine ca. 1300 x 700 x 1530 mm

Condition: new, pressing force: 40 t, - Capacity 40 tons - Bending capacity 250 x 16 mm - stroke 290 mm - NC touch screen control - Foot control Ijdpsu Smq Eefx Ag Ijat - Emergency stop - 400V

Condition: new, cutting diameter 180 mm capacity 90 degrees: square 180 x 180 mm capacity 90 degrees: flat 200 x 150 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 125 x 110 mm capacity 60 degrees: flat 70 x 70 mm Isdpfx Aoxaa Tnjg Ijat capacity 60 degrees: square 70 x 70 mm capacity 60 degrees: round 70 mm turning speed range: 40 / 80 m/min saw band length 2.130 x 20 x 0,9 mm total power requirement 0,75 kW weight of the machine ca. 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Cutting speed --- 45 - 90 M/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDING * Adjustable material clamp * Graduation up to 60 gr. * Automatic shut-off * Low-noise electric motor * Closed worm gear transmission Iasdpfx Agsga Tzqs Iet * Hydraulic pressure control * CE emergency stop * Cooling pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm Ijdpfsxabhmsx Ag Ieat working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, Model Name Iasdpfjl H Dydox Ag Iet PH 261-1 HB