Servo conventional lathe

Comev MTE 26

Condition: used, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Gsdjwznp Nspfx An Rjbl Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector Gedjyu Iliepfx An Robl :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: good (used), Year of construction: 2001, CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Gedpfed Eranex An Rjbl Machine card see more data. Machine in good condition.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Volvo FMX 500 6x2 with steering axle and Fassi loading crane: * Electro-hydraulically steered trailing axle * Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle * FMX safety day cab * 4900 mm wheelbase * Exhaust emissions in accordance with Euro 6 Stage D, with SCR, particulate filter and exhaust gas recirculation * Diesel engine 12.8 l, 510 hp/375 kW * 2,550 Nm engine brake Volvo Engine Brake * Automated 12-speed transmission * Liftable axle * Rear axle RSS1370A, single ratio, 13 t axle load, GZG 70 t * Drive axle ratio 2.64 * Driver Comfort driver package * Heated and electrically adjustable rear-view mirrors, robust, wide-angle mirror on both sides * Steel roof hatch, manually operated * Exterior sun visor * Interior sun visor with driver's mirror * Radio reception: AM/FM and DAB (analog & digital) * USB connection * 6 loudspeakers * Bluetooth connection for two telephones * Second driver info display, 7" bdisplay * Naviagation system * FMX lighting package * Bi-xenon headlights with automatic headlight range control * Headlight cleaning system * Automatic light switching between daytime running lights and dipped headlights * Rain sensor * Air suspension on front axle * Stiff front stabilizer bar * Reinforced rear stabilizer bar * Volvo Dynamic Steering (VDS). Active, electronically controlled steering assistance * Rear air suspension * Electronic level control * 2 batteries, 24V/225 Ah * Battery indicator in the display * 405 L aluminum tank on the right, D-shaped, 710 mm high, 1030 mm long Gbodpforrtl Hex An Rsl * AdBlue tank on the right, usable capacity 64 liters * 2 foldable wheel chocks * Rockinger 400 G-150 trailer coupling * Central towing device at the front, reinforced * Electrical connection for trailer/semitrailer, 15-pin * Trailer/semitrailer connection Duomatic. * Trailer connections in the center * Stationary trailer brake (active up to 7 km/h) * Steel air reservoir * Aluminum rims Dura-Bright EVO (polished) * 2x VA tires 385/65R22.5 Continental * 4x AA tires 315/70R22.5 Continental * 2x NLA tires 385/55R22.5 Continental * Alternator 150A/4200W * Double fuel filter on the engine * Water separator for use with regular fuel quality in Central Europe * Power take-off, transmission side * Multifunction leather steering wheel * Steering wheel adjustment, height and tilt * Digital tachograph 4.0, generation 2 * Speed limiter 90 km/h * Cruise Control (cruise control) * Electronic Stability Program (ESP) * Adaptive cruise control (ACC) with collision warning and emergency braking function * Lane departure warning with steering assistance * Air conditioning with automatic temperature control and sun sensor * Immobilizer * Electric windows * Side sun visor, driver's side * Reversing alarm * Rear view camera, supplied loose, * Preparation for OBU (toll device, Toll Collect) * Wireless remote control, multifunctional * Comfort driver's seat, air suspension, heated, * Passenger comfort seat, air suspension, heated * Two armrests on the driver's seat * Auxiliary heating cab * Standard interior lighting * Additional thermal insulation for cab rear and side walls * Connection for air gun in driver's cab (gun & holder included) * Tinted windows * Front underride guard * Manual tilting device for the driver's cab * Front mirror * Daytime running light LED, "V-light" * Two rotating amber rotating beacons on the front cab roof * Jericho horn / compressed air fanfare * Roof antenna and preparation for CB radio * 4x work lights * Trailer de

Condition: used, Year of construction: 2001, - 3-axis position display - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Infinitely variable speeds with 2 speed ranges - Horizontal milling attachment - Hydraulic tool clamping - 11 kW drive - Automatic central lubrication - Coolant system - Table guard - CE certification - Including milling tools - Including operating manual and documentation - Year of manufacture: 2001 - Complete service performed Technical Data Work Table: - Clamping surface: 1500 x 360 mm - Table load capacity: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis cross: 540 mm - Z-axis vertical: 430 mm Working Area: - Distance spindle nose / table: 50 - 480 mm - Distance spindle center / column: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / cross: 16 - 1200 mm/min - Feed vertical: 8 - 450 mm/min - Rapid traverse longitudinal / cross: 2500 mm/min - Rapid traverse vertical: 1000 mm/min - Feed motors: 3 x 1.5 kW Main Spindle: - Number of speed steps: 12 - Speed range: 40 - 1750 rpm - Graduation: 160, 225, 315, 440, 620, 880, 1240, 1750 - Drive power: 11 kW - Spindle taper: ISO50 DIN2080 - Milling head overhang: 420 mm Gbjdpfowkvlkex An Rsl Dimensions and Weights: - Machine footprint: 3050 x 2150 mm - Machine dimensions: 2050 x 2210 x 1830 mm - Machine weight: 2800 kg

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Gbodpfjx Di Rqjx An Rol Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, MILLING MACHINE STS AVANTGARDE HS YEAR: 2008 CNC: SELCA S 4045 DH WORKTABLE DIMENSIONS: 2,200 mm x 1,100 mm TRAVEL PATHS: X: 2,000 mm Y: 1,500 mm Z: 1,500 mm SPINDLE TAPER: ISO 50 MAX. ALLOWABLE LOAD: 6,000 KG AUTOMATIC BI-ROTARY HEAD: A 2.5° - B 2.5° SPINDLE SPEED: 4,000 rpm POWER: 37 KW Gsdpfsxc Umhsx An Robl TOOL MAGAZINE: RANDOM, 24 POSITIONS HIGH PRESSURE: 20 BAR ACCESSORIES: 2-SPEED RANGE SELECTOR CHIP CONVEYOR MACHINE CAN BE SEEN IN OPERATION COMPLETE DOCUMENTATION