Center Lathe

COLCHESTER TRIUMPH VS 2500

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Gbsdpfjx Hrumex Agbjg Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: good (used), Technical specifications: Briquetting press in good condition Gjdpewtdk Tofx Agbsbg Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Machine weight 1800kg Main Drive Spindle speed range 2500 This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Gsdpfx Asx D Nwdjgbjbg Application Types Turning

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 246 mm, spindle bore: 54 mm, turning diameter over bed slide: 400 mm, turning length: 1,270 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, Colchester Triumph VS2500 Gap Bed Lathe Immaculate Condition 50" Between Centres Spindle Speeds 75-2500 rpm Swing over bed 400mm Swing over cross slide 246mm Spindle Bore 54mm 2 Axis DRO Newall NMS3000 Interlocked chuck Guard Metric Machine LED worklight 6 x Quick Change Tool Holders 3 Jaw Chuck 10" 4 Jaw Chuck 12" Face plate 14" Gbsdpfx Aoxxiyzegbjg Fixed Steady Coolant Pump & System 3phase 400V Price includes free delivery with crane offload within 100 miles of Sheffield Any interest please contact me for inspection 

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Gbsdpfxor Ezfps Agbog Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH Gbsdpfxeq Dll De Agbsg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Gbjdpfjxldidjx Agbjg Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory) Gbodpfx Agowcd S Nebjg  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad Gbodpfew Ed Tfjx Agbsg number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm Gbjdpfx Agovav Sdebeg throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *