Laser cutting machine

Bystronic Bystar 3015 Bystar 3015

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER Kdsdovghb Depfx Ahvei X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 150 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 3000 x 1500 x 150 mm SOURCE: IPG Fiber 4000 ; 4000 W CONTROL UNIT: PRIMACH 30L WEIGHT: 10000 Kg OVERALL DIMENSIONS: 10500 x 3400 x 2200 mm

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Ksdpfx Ahstvpiljvsdi We also have a number of single point welding machines for steel wires.

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets 714KWe, thermal 1058KW, cooling 689KW Kjdpfx Ajun I N Hshvedi

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale Kodpfx Ahexc N Rhovedi manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l Kedpfx Aholf Iqnsvodi - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Kdjdpfotv Nadjx Ahvji Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Kdodotv E Hcspfx Ahvei Model H1300 Year of Construction 1982 Built in Japan

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Kodpjtkuk Rjfx Ahvodi

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Kjdofr T Emspfx Ahvsdi TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,454 h, • Pressing force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tooling (Option: increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: increased installation height): 430 mm (580 mm) • Max. distance between lower edge of press beam and upper edge of machine table (Option: increased installation height): 470 mm (620 mm) • Press beam tilting: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y-axis rapid traverse²: 200 mm/s • Max. Y-axis working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Travel paths, backgauge zone • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • Max. backgauge zone in X-direction: 860 mm Kdsdpfxjyfxdwe Ahvei • R-axis travel: 150 mm Control • Standard scope: T3500T Multi-Touch control Connection data • Connected load (IEC) approx.: 20 kVA Dimensions and weights • Required floor space (length x width): 3607 x 1644 mm • Height (Option: increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Structural body: White = NCS S 0505 R80B • Blue = approx. RAL Design 250 20 20 • Black = RAL 9005; Silver elements with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending – Maximum Y-axis rapid traverse speed is not limited in pure foot-operated mode – Tool height can be set easily and quickly with a rack solution and weight compensation – BendGuard can be easily slid back for lateral tooling processes without reinstallation – BendGuard is insensitive to shocks (disassembly), as the unit electronics are not connected Table supports (2 pieces): – Table supports are manually adjustable in Z- and R-directions and can be fixed with quick-clamp – Facilitate handling of large and heavy workpieces and can serve as storage surface for finished parts – Load capacity: 70 kg per support LED work area illumination front and rear: – Excellent illumination inside and in front of the machine’s working area – Modern LED technology: energy-efficient, cool-running, and very long-lasting DXF import: – Import DXF drawings into the 2D control system.