CNC machining center

Busellato Easy Jet 5.12 - B

Condition: refurbished (used), - Manufacture year 2007completely overhauled - BONGIOANNI variable cut axis system - 5 headlocks Fpodpfetta I Ejx Afneb - 4 log turners - New control unit - New feed system - New electric cabinet/control SPS - Frame and rail system - Pantograph - New drive nom. 44kW

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h Fpjdpjd Hz Nisfx Afnjb

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Fpodomgc I Nopfx Afnob Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT - NBC 412 Automated nesting cell Fpedswh Sfzspfx Afnob Description: Rover A 3.40 FT Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center CE Safety devices Rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Fjdpst R T Hcofx Afnjpb Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Fodpfx Afomidtronspb Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Condition: used, x-travel 1050 mm y-travel 600 mm z-travel 600 mm Fedpfsvnh Umsx Afnepb control Fanuc weight of the machine ca. 7200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,610 h, We offer a New Holland combine harvester – CR980 – grain combine – year of manufacture 2003. It worked until the end of the harvest, is in excellent condition, recently serviced, and we invite you to view it at our farm near Olsztyn. - Garaged during winter. - Thresher hours: 4147 - Engine hours: 5610 Fedpfx Afsxu E Eronopb Highly recommended!

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Fpjdpeu Itqdjfx Afnob

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, Equipment: documentation/manual, CNC sliding headstock lathe Citizen L520, year 2000 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Bar Ø max. 20 mm, Fodpfx Afjt St A Tenepb turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Live tools on the main spindle FMB barfeeder Machine runs without problems or defects, can be inspected in production and seen running. Machine has all books and manual.