Vertical machining center

BRIDGEPORT Hardinge GX-480

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 800 mm control FANUC Series 31i Model B spindle passage 76 mm turning speed range - drive spindle 3500 U/min Pjdpow U U Idofx Adnjgw drive capacity - spindle motor 40/25 kW max. torque on the spindle 864 Nm Number of tools 16 St. tool adaptor BMT rapid traverse 30 m/min dimensions 2,9 x 2,1 x 2,25 m weight of the machine ca. 6,5 t Used CNC- lathe with boxway system in very good condition Only 9.100 h power on. - 3- jaw chuck Ø 315 mm - chip conveyor - some tool holders - tailstock programmable - oil dust collector -"Build In" motor

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW Pjdoxddrpspfx Adnsgw weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Pgjdpfsxflr Hsx Adnjw Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Pgjdpowk Nm Isfx Adnow

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Heidenhain TNC 640, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, table load: 200 kg, rotary table diameter: 380 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 36 bar, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses Podpfjq Tafxsx Adnsgw -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Pjdjv H Dgpepfx Adnogw

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Pedpfxsiw Ekdj Adnsgw Modell: VX380TD Year of c.: 2007 Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Year of construction: 1990, condition: good (used), CNC-4th axis Pgjdpfjgabu Uox Adnow NIKKEN type: CNC-200 year 1990 with counterholder and base plate.

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, Pgjdpfx Adownfzcjnow 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Psdpfxjwbvhao Adnogw Mass (bar loader) = 700 kg