Upper support (2138)

Breite 145 mm Lochkreis 180 mm

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Kledpfx Asx Enh Tebfeu Application Types Milling

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Kjdpfex Dikksx Abfolu

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Klodjw Ebpwspfx Abfju Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Klsdpfx Aboxtbf Eofeu Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: Kedpfx Abeym Ut Djfjlu * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS height of center 330 mm distance between centers Spindle bore 103 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over Slider 420 Speed range 36 - 1600 rpm (12 steps) Spindle nose ISO 702 / II No. 8 Range of longitudinal feeds 0.063 - 2.52 mm / rev (65 steps) Range of feed rates 0.027 - 1.07 mm / rev (65 steps) Metric threads 1 - 14 mm (22 steps) Inch thread 28 - 2 speed / inch (25 steps) Module thread 0.5 - 7 mm (18 steps) Diametrical thread 56 - 4 DP (24 steps) Quill diameter 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 11 kW Weight 3.050,00 kg Kjdpfxsdzzw Uj Abfjlu Dimensions 3135 x 1050 x 1450 mm

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm turning length 1700 mm Kedpfsytg Uysx Abfslu swing diameter over bed slide 600 mm total power requirement 12,5 kW

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Kjdpfxswz I Avo Abfelu Capaciteit: 3600 x 150 ton BC55 CNC-besturing Bouwjaar: 2000 CNC-bombering Euro-gereedschapsklemming

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm Kodoupw Twjpfx Abfjlu weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 5 h, functionality: fully functional, overall weight: 150 kg, load capacity: 6 kg, arm reach: 1,445 mm, repeat accuracy: 0.06 mm, Industrial welding robot with a payload of 6 kg and a reach of 1445 mm. The robot served as a demonstration exhibit. Kodpfx Aoqcunaebfjlu