Wide belt sanders Boere Sandrite 1100 C 2018

Boere Sandrite 1100 C

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Hnodpfxeudxchj Ah Neg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander Hnsdpfsgi Drysx Ah Njg - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table Hedpfjw T Sc Aex Ah Nsng A good selection of tooling, segmented and full length

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Model BBS 630 C Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Hodpecnw U Rjfx Ah Neng Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Hodpfew I R I Hox Ah Neng Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Hnsdpew E Ty Ujfx Ah Njg Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: good (used), Year of construction: 2006, CNC Multitron PS 10 Control: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Hsdpfsv I Rfujx Ah Nsng Cutting speed 15 - 105 m / min Technical details Cutting diameter 320 mm Saw blade length 3280 mm Cutting width 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Condition: good (used), Year of construction: 1997, functionality: fully functional, CNC machining center Biesse Rover 20 Year of construction 1997 Hodpfetpuu Dox Ah Neng Manufacturer Biesse Italy S/N 64851 Working area 2.893 x 950 mm 6 traverses with 12 vacuum cups Milling spindle with ISO 30 tool holder 3.6 kW, drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-fold tool changer. NC410 control unit Color screen Total power consumption 10 Kw 400 V , 50 Hz with safety fence ( not on the pictures ) 3 step mats with Becker vacuum pump, 3,0 Kw CE marked 1900 kg

Condition: used, Year of construction: 2015, With sanding unit consisting of: - 1 combination unit, pneumatically controlled sanding shoe for heavy veneer sanding - Dust brush Vacuum conveyor and vacuum device pre-installed Roller table at infeed 200 mm Roller table at outfeed 1000 mm Constant table – consistent infeed height Hjdswa Uluepfx Ah Neng automatic workpiece thickness adjustment/sensing Machine control via touch screen Used, top condition Brand: Bütfering Type: SWT 215 / L Optimat Year of manufacture: 2015 Machine No.: Working width approx. 1350 mm Passage height approx. 3-160 mm CE type-tested Belt dimensions approx. 1370 mm x 2150 mm (long belts) Feed speed stepless 2.5-13 m/min 1 combination unit 15 kW with profiled steel roller D 160 Diameter 160 mm Pneumatically controlled air shoe Space requirement approx. 1625 mm x 2000 mm x 2300 mm Weight approx. 1500 kg Total connected load approx. 16 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Year of construction: 2000, condition: excellent (used), I sell the widebelt sanding machine Costa A CT 1150, year 2000. Configuration hard rubber cylinder - electronic segmented pad. Working width 1150mm Bands 1180x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2300kg 2 motors 15 + 11 kW Additionally built brushing unit with bottom cleaning brush. Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately. Hnsdpfog Trubox Ah Nog