Surface grinding machine

Blohm PRECIMAT 306 ET

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t Bljdpfx Aoyb S Riomyok dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Bledpfowtg H Rox Amysk

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L Bledjyg Rf Nopfx Amyok - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm Bedow S Efzopfx Amyolk x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Blodswb Hygepfx Amyok Acceptance at our premises Shipping according to your specifications

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 055 - 030.0221, Complete overhaul Year 2003 - Fanuc 16i-T Center height 175 mm and distance between centers 650 mm 2 external grinding wheels + B-axis fine adjustment Country of origin: CH Voltage: 3x400V Dimensions: 3680x2165x2100 mm Net machine weight: 5500 kg TECHNICAL SPECIFICATIONS Center height: 175 mm Distance between centers: 650 mm LONGITUDINAL SLIDE (Z) Maximum travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm TRANSVERSE SLIDE (X) Maximum travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Bedjzbaz Ajpfx Amyelk Resolution: 0.0001 mm Maximum weight of workpiece clamped between centers: 80 kg TAILSTOCK Taper: Morse 3 Sleeve: Ø 50 mm Sleeve travel: 35 mm UNIVERSAL GRINDING WHEEL HEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Grinding wheel head power: 12.5 kW Rotation speed: 3,200 min-1 Programmable cutting speed up to: 50 m/s B-axis travel: -15 to +195° B-axis indexing accuracy: 0.0001 ° LEFT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001 ° RIGHT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Subject to errors and omissions, the technical specifications are provided without commitment. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanical, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings + adjustment. New paint. Workpiece head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of belts. New spindle bearings. New paint. Tailstock Disassembled, inspected, overhauled Hydraulics Disassembly, motor check, replacement of pipes, defective and worn parts. Check the hydraulic block. X-axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of the hydraulic piston, re-grinding of the tables. Z-axis Disassembly, re-grinding of the tables, replacement of worn and defective parts, overhaul of the hydraulic piston, new paint. Electrical cabinet Complete check, replacement of various relays. Paint Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the Bjdpfxjxwdw Es Amyjlk scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1992, grinding length 0800 mm Blodjwgnz Ajpfx Amyok grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. Bodpfsy Iuvcex Amyolk type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock 12-position turret With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm Bedpfx Aovazz Demyjlk - Motorized dust extraction - Infinitely variable disc speed - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg