Tube bending machine

BLM TUBE-FORM

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Nedpfx Aben Sm Ddjwjld Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg Nedpsx E Eihsfx Abwold NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Nlsdpfx Aew Rpvbjbwed Laser diode 22726

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Nsdpfx Asr Nfvmebweld Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW Nodpfsxcuicox Abweld weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table Nljdpfx Abstwba Sswsd

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. Nlsdpew S Efzofx Abwed *

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Njdpfxsl Dq U Us Abwjld Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via Nledpfxjng Amke Abwed the company JUTEC - Service contracts, maintenance at your site

Condition: used, Steel structure for crane system Width: approx. 8.5 m Length: approx. 7.95 m System dismantled Nlodpfsbruzgex Abwed The system is sold "as is". Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Note: no guarantee, no exchange, no returns possible.