Edgebander

BIESSE AKRON 1400

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. Kwodpfxsxzb Iij Ahvjw SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Kedewkf Dvspfx Ahvoww Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Kwsdpfew Sw Tksx Ahvjw Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Kwjdpfx Ahowlbxljvsw Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Kwjdpewcyd Ijfx Ahvow Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Kjdpfx Aomt Hhwshveww Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Ksdpfx Ahowwl Nlsveww Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin Kwsdpfx Aet Hxxpohvjw flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, Kwjdjxranpspfx Ahvow including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: Kwjdpfx Ahsxraimevew 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit