Up- and down-bender, doublebender

BIEGEMASTER XBEND 6.2,00

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 250 kg, load capacity: 16 kg, We at Binici MB GmbH also have other industrial robots in-house. All our robots are fully functional (with complete accessories). Fgjdpov Diuyefx Ab Tsk We are at your disposal for good advice

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Fsdpsf Epznjfx Ab Togk Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: excellent (used), functionality: fully functional, power: 7.35 kW (9.99 HP), fuel type: diesel, gearing type: mechanical, Year of construction: 2003, AGRIA 3400 Differential Single-axle tractor / tool carrier - 10 HP Yanmar L100AE diesel engine - 4V+4R shuttle gearbox - Handlebar height and side adjustable - Tyres: 6.00-12 AS Accessories included in the purchase price: - R2 MT-90 rotary harrow "new" This Agria 3400 single-axle tractor is in good overall condition, recently serviced, and ready for immediate use! Fgedpfxswzwfto Ab Tok Sold as a used machine, excluding returns, warranty, and liability. Net price €7,555 // Gross price €8,990 - Inspection / test drive possible - Nationwide shipping €220, excluding islands

Condition: new, Year of construction: 2025, Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Manufacturing modern press brakes is our passion, which we would like to share with you. At the trade fairs we share our experience and attention to our bending machines, thanks to which we can keep improving our bending machines, without forgetting who we really work for. The quality of our press brakes is very important to us. Directly from the manufacturer Prod-Masz! New, complete machine from current production. Technical specifications: maximum working width: 3140 mm Bending capacity: up to 0.8 mm (steel sheet) Bending angle: max 145 degrees Bending beam thickness: 24 mm Weight: approx. 400 kg Roller shears (max. cutting capacity up to 0.8 mm / sheet steel) The machine complies with CE guidelines and has a 12-month guarantee. Rotary shears 0.8mm - plus 350 euros welt press/ crusher plus 75 euros Fodpecttgfefx Ab Tegk Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery.

Condition: used, functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Biegemaster, working width: 6,400 mm, Equipment: documentation/manual, emergency stop, For sale: Biegemaster XBEND 6.1,5 Bending length: 6400 mm Insertion depth: 1250 mm Fodpfx Aewxmdyeb Togk Reason for sale: acquisition of a new machine Year of manufacture: 2015 The machine was operated in single-shift operation always by the same 3 operators Regular maintenance performed Slight signs of use visible Machine can be picked up approximately 7 months after the date of purchase

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: T800kVA, input voltage: 10,000 V, nominal power (apparent): 800 kVA, secondary voltage: 400 V, Three-phase oil-immersed transformer in a hermetically sealed design for rooftop/outdoor installation according to Ecodesign Level 2 (aluminum) High/Low voltage: 10 kV / 0.4 kV Rated power: 800 kVA Circuit group: Dyn 5 CE certification Fsdpfeuba Rnex Ab Tjgk Overload: according to IEC 60076-7 Overvoltage: according to IEC 60076-3 24-month warranty - Price upon request - We can provide you with a detailed quote upon request - Our terms and conditions apply Energie-Anlagen-Röring GmbH Rudolf-Diesel-Straße 3b 48691 Vreden

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, Used Biegemaster long-folder model BMTH 6.1,25 Year 1988 Technical details: Working length: 6000 mm Bending capacity steel 400 N/mm²: 1,25 mm Fodpfxexpgago Ab Togk Bending capacity aluminum 190 N/mm²: 1,50 mm Stands and Arms: 5 pcs. Incl. Electric cutter Incl. Standard control

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning Fedpfx Absxn Dhle Tsgk

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. Fgodpfed R Er Djx Ab Tek We will be happy to provide you with further information on request.

Condition: used, Year of construction: 2011, operating hours: 744 h, overall weight: 1,500 kg, fuel: electricity, No. 04437 Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours Made in Germany For various materials, e.g. wood, plastic, etc. Hopper opening 800 x 630 mm Electrical connection 400 V / 19.25 kW Fodpfeuxbccjx Ab Tegk Rotor diameter 260 mm Rotor width 630 mm 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Sieve diameter 30 mm SPS Siemens S 7 200 control system Automatic & manual operation possible Hydraulic operating pressure 160 bar Suction nozzle diameter 160 mm Including technical documentation Transport dimensions approx. 1800 x 1250 x 1800 mm LWH Weight 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location