Vertical lathe

BERTHIEZ

Condition: good (used), VERTICAL LATHE BERTHIEZ TFM 250, 2 AXES CNC FANUC 16 i t TABLE 2500 mm MAXIMUM TURNING DIAMETER 2800 mm Maximum workpiece weight: 25 tons Maximum table rotation speed: 160 rpm Main motor power: 55 kW X-axis travel: 2775 mm Z-axis travel: 950 mm Ljdpfx Asyzmvzjc Ioab Chip conveyor 4-jaw table Machine weight: 35 tons

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Ljdpfexrg S Iox Ac Ieab Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), total length: 5,100 mm, total width: 2,250 mm, plate height: 350 mm, Manufacturer: BERTHIEZ Type: Cast iron Year of manufacture: 2000 Specifications Metric US Standard Length 5100 mm Width 2250 mm Height 350 mm Number of T-slots 6 T-slot spacing / step 300 mm T-slot size 36 mm Weight per plate approx. 9800 kg Ledpfx Acowp Hiwj Isab Number of matching pieces 2 Dimensions (estimates) Length 5100 mm Width 2250 mm Height 350 mm Weight 0 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and as far as possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent representations or contractual conditions. We recommend you check all important details.

Condition: excellent (used), functionality: fully functional, BERTHIEZ S.A. LATHE MACHINE T1 - 240 / 50 F * Cross travel (X-axis): 700 mm * Vertical travel (Y-axis): 650 mm * Longitudinal travel (Z-axis): 9500 mm * Milling spindle taper: SA 50 Power: 25 kW Spindle speed: 16 to 2000 rpm * Tool measurement probe Laodpsyrx N Tsfx Ac Ijb * Workpiece measurement probe * Coolant delivery rate: 40 l/min, pressure: 3 bar 1.3 Headstock The collet diameter of the spindle in the headstock is 240 mm. The faceplate on the spindle has a diameter of 620 mm. The chuck jaws are hydraulically adjustable between 80 and 620 mm. Both concentric and offset adjustments are possible. The faceplate speed is adjustable between 5 and 500 rpm. Speed range 1: 5 to 143 rpm Speed range 2: 17 to 500 rpm Speed range overlap: range 1 up to 120 rpm, range 2 from 80 rpm. Switching from turning to milling mode, the faceplate functions as the C-axis, offering rotation speeds from 0.01 to 2.5 rpm. 1.4 Tailstock The tailstock has a quill with a diameter of 200 mm and a stroke of 300 mm. The quill can be actuated either manually by push button or automatically via M-functions. The quill compensates for workpiece thermal expansion, activated by M50. The tailstock travels on a powered slide, which can be moved either by push button or automatically by programming function M55 H.... Clamping of both the tailstock slide and quill is automatic.

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Lsdouwktnopfx Ac Ioab Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: used, functionality: fully functional, turning diameter: 10,500 mm, rotational speed (max.): 60 rpm, table load: 100,000 kg, table diameter: 5,000 mm, Berthiez JO-9375 5000mm Vertical Boring Mill Single column openside Retractable table 10,500mm maximum turning diameter 5,000mm table diameter 100 ton maximum table load 1,250mm height under tool 0.95 – 60 rpm table speed 2,600mm height under cross rail 4 table jaws Ledpfx Acoy Azhus Isab Rebuilt and CE marked 2008 X traverse lead screws replaced with servo motors and linear scale programmable from Fagor Corzosa programmable readout 93 tons total machine weight

Condition: good (used), Year of construction: 1979, Single column vertical turning lathe BERTHIEZ TM500 SP Manufacturer: Berthiez (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Ljdpfx Ajx A U Rajc Ijab Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power: 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360 mm Machine weight: approx. 230 tons The machine is capable of both turning and milling operations. Do not hesitate to contact us for any additional information.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW Laodpstv H Ucsfx Ac Ijb total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: used, Year of construction: 1962, faceplate diameter 2250 mm swing diameter 4500 mm turning height 2000 mm turning diameter 3150 mm Lasdeuc Aldjpfx Ac Ijb workpiece weight max. 25000 kg total power requirement 55 kW weight of the machine ca. ca. 32 t required space / m

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 8P Model: TM500 8P Year of manufacture: 1979 Chuck diameter: 6,300 mm Max turning diameter: 15,000 mm Max workpiece height: 4,000 mm Ram travel: 3,600 mm Main motor power: 100 kW Max workpiece weight: 80 t Section of side tool post: 360x360 mm Side tool post travel: 2,500 mm Approx. machine weight: 230 tons Video available Laedpfx Acsx Dbydo Ijb Milling and hobbing heads available

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Ljdpfxsym Nfzo Ac Isab Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 1978, CNC vertical lathe Manufacturer: BERTHIEZ Model: TFM 200 Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teach-in, ISO and Conversational modes) Specifications: Table diameter: 2,000 mm Maximum swing: 2,300 mm Usable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 – 200 rpm Table motor power: 55 kW Ram section: 200 x 200 mm Standard table height from floor: 731 mm Lsdpfx Aew Adpboc Ijab Vertical traverse stroke: 1,300 mm Traverse movement speed: 400 mm/min Vertical ram travel: 1,600 mm Right carriage travel (from table axis): 1,280 mm Left carriage travel (from table axis): 400 mm Continuous feed rate range: 0.05 – 24 mm/rev CNC programmable feed rate: 0.2 – 360 mm/min Rapid traverse: 6,000 mm/min Equipped with: 12-position tool changer Chip conveyor

Condition: used, Year of construction: 1982, BERTHIEZ 9330 vertical lathe with 2-axis digital readout. Table diameter 1400mm, swing 1700mm, under crossrail 1170mm. Equipped with lateral carriage. Speeds: 160rpm / 37kW. Weight: 15t. Lasdpfxsxwx Ace Ac Ijb

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) Lajdpfx Ajxtp Hwjc Ijb B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T