Column Drill GB 55 SK NC VARIO

Bernardo GB 55 SK NC VARIO

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt Hnedpfx Ajp Scqyendor total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 Hsdpfx Aspxmlijndsnr quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox Hnodpfx Aepxmausndor - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: new, cutting diameter 315 mm dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling Hnodpfx Aswfyq Tjndor

Condition: good (used), Year of construction: 1996, Offer 24407 Technical Data: - 2 motor-driven rollers - Hydraulic adjustment of the top roller; pressing force: 18 t - Shaft diameter: 60 mm - Shaft rotation speed: 6 rpm - Roller diameter: 215 mm - Bending capacity: - Flat bar R 300 vertical: 80 x 15 mm - Flat bar R 300 horizontal: 120 x 25 mm - Square material R 300: 50 mm - Round tube R 900: 100 x 2 mm - Drive: 400 V / 1.5 kW Hodpfxey Ddrfe Andenr - Includes: separate control panel with digital readout + foot switch - Forward / reverse operation - Side guide rollers - Standard bending set for flat and angle material - Weight: approx. 1200 kg - Space requirement: approx. W 1000 x H 1750 x D 1250 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Hnjdpfxey S Axgo Andjr Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Hsdsyapyrjpfx Andsnr Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: new, Year of construction: 2026, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 420 mm, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, overall weight: 1,145 kg, Equipment: rotational speed infinitely variable, The Smart 410 Pro Vario Universal Lathe is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model provides an ideal solution for mechanical workshops, toolrooms, and maintenance departments. Bed made from cast iron, induction-hardened and precision-ground Mechanical foot brake reduces downtime Removable bridge allows machining of larger workpieces Quiet and smooth operation thanks to hardened and ground gear wheels Simple and quick adjustment of feed and speed Solid construction ensures vibration-free performance Sliding tailstock system for taper turning, handwheel with high-precision scale (0.02 mm) Central switching system for feeds and threading, with leadscrew and feed shaft Modern main spindle bearing with precision angular contact ball bearings 3-axis digital display included as standard Infinitely variable spindle speed adjustment via inverter with digital display for optimal adaptation to the workpiece Centres distance: 1000 mm Centres height: 210 mm Swing over bed: 420 mm Swing with bridge removed: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle nose: DIN 55029, D1-6 Min. spindle speed: 30 rpm Max. spindle speed: 3000 rpm Spindle speed range - number of steps / stepless: stepless (30–550 / 550–3000) Longitudinal feed range: (17) 0.05–1.7 mm/rev Cross feed range: (17) 0.025–0.85 mm/rev Metric threads: (42) 0.2–14 mm Inch threads: (45) 2–72 TPI Tailstock quill diameter: 50 mm Tailstock quill travel: 140 mm Hnjdpjyr I Sqofx Ander Tailstock taper: MT 4 Motor power: 5.5 kW Voltage: 400 V Dimensions (width): 2090 mm Dimensions (depth): 1050 mm Dimensions (height): 1600 mm Weight approx.: 1145 kg Scope of delivery: 3-jaw chuck DK11-200 mm / D6 Face plate 350 mm Fixed steady rest – max. passage 135 mm Travelling steady rest – max. passage 65 mm Coolant system 4-way tool post Micrometric longitudinal stop Threading dial Magnetic brake compliant with CE standards Electromechanical spindle brake Filled with Shell Tellus 46 oil Halogen work light Change gears 2 centering centres Chip tray Service tools 3-axis digital display Infinitely variable spindle speed Legally required safety guards Full operating documentation in Polish CE Certificate 24-month warranty for all components at no extra cost

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device Hjdon Ea Twopfx Andjnr - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base Hnsdpezg Hfwsfx Andor - Coolant system with tank and pump - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel