Drilling machine

Bernardo GB 30 Vario

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Ihsdexabiqopfx Ah Njt Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Ihedpfxegv I Uno Ah Net Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE Iedsud H Huopfx Ah Nsht DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Isdpfjpy Eldjx Ah Nsht Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Ihodpoiypz Eofx Ah Njt Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm Iedpfx Asb Eldnjh Njht table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Condition: used, Year of construction: 2021, control Heidenhain TNC 640 travel -x axis 3.500 mm travel -y axis 1.200 mm travel -z axis 1.500 mm turning speeds 4.000 U/min Maximum power 37 kW max. torque 644 Nm indexing 2,5 ° working area 3.700 x 1.000 mm max. table load 9.000 kg Ihodpfjx A H Scex Ah Nst diameter of tools max. 125 (250) mm tool length - max. 400 mm General: - Gear spindle: SK 50 Milling head (spindle): - Technology: Diagonal head with gear spindle Tool magazine: - Technology: Chain magazine - Tool changer: Double gripper - Number of stations: 40 Equipment/accessories: - Position measuring systems: Direct in all axes - Chip disposal: Chip conveyor - Coolant supply: IKZ system, 20 bar - Workpiece measurement: Renishaw measuring probe - Setup mode: Electronic handwheel - Software option: Adaptive Control

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm Ihodpfjxak H Eex Ah Net swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, The SSB F 60 Super VT PRO is a cutting-edge Column Drilling Machine that exemplifies KNUTH's commitment to delivering robust and precise machining solutions. Designed for versatile operations, this machine excels in drilling, countersinking, reaming, and tapping, making it a perfect fit for workshops tasked with single and small series production, especially in steel construction and maintenance of large systems. The machine features an electronically controlled servo quill feed complete with a large touchscreen control panel for intuitive operation and effortless selection of machining parameters. Its heavy-duty construction, characterized by a durable cast iron build, ensures high drilling and thread cutting capacity, while the motorized table height adjustment and ± 45° swivel range enhance flexibility during use. With standard features including automatic thread cutting cycles, an efficient coolant system, and a comprehensive accessory set, the SSB F 60 Super VT PRO stands out as an invaluable tool in any professional setting. You can order online today to elevate your machining capabilities with this precision-engineered drilling machine from KNUTH. Ijdpeq Rdqnsfx Ah Njht

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) Ihjdpfsrb Afajx Ah Not - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column