Cold Circular Saw

BEHRINGER EISELE PSU 450

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm Lhedpfsu Niuzsx Aagec hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: excellent (used), IMM 72780 Double-sided polishing machine Lhjdpfeu Hanyjx Aagjc Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Lodpfx Aju Nit Rjagehc Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Lhjdpfx Ajv U Dfusagec Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Errors excepted - technical data is non-binding

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2 Ledpfx Aaet Apugegjhc

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm Lsdpefxyhfofx Aagohc :200 l

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm Lhsdsz N Amspfx Aagjc cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min Lhsdpju Hag Nefx Aagoc workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Lodou Rqynopfx Aagehc Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: Lodpfelnkc Uox Aagehc - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies