Plate shear

BAYKAL MGH

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Type MGH 3100 16 Capacity 3100 x 16 mm Ibedpfezvqqiox Apcob Adjustable back gauge Adjustable cutting clearance Rear safety guard

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Ijdpsgbfaxofx Apcsbb Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Iodpfx Aeya Hwzepcsbb

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand Iedpfx Apopxmxcscjbb - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: new, Year of construction: 2026, overall weight: 400 kg, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Ibsdpoh I N Udefx Apcob * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm Ijdpfx Apou Upafjcebb - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Ibodpfxjzlpaho Apceb Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools Ibjdpfx Apera Rrhscob incl. work light new control in 2003: Cybelec DNC 1200

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 Iodpfxel Si Uue Apcebb • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: new, Year of construction: 2025, Oscillating shear machine Cutting length 3100 mm Material thickness, steel: 10 mm Ibodpfx Aolac Drjpcjb Blades for stainless steel Touchscreen control: Cybelec Back gauge: 1000 mm Cutting clearance adjustable via control panel Delivery time: 3 months