Hole line boring machine

Ayen RPM

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Hodpfx Ascblc Som Ajfh Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Hfedpfx Amjw U Uh Do Ash Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Hodpfx Aokwcdbem Aefh Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Hfedjlzizmspfx Am Ash

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm Hfedpfx Aeidabvjm Aeh weight 11 kg connected load frequency 230 V engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Hfsdpfxedzqb Ee Am Aoh Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: excellent (used), Year of construction: 2004, Multi-blade saw Raimann ProfiRip KR 310 M (2 movable flanges) with package crosscut saw HOLTEC ES 121SHKA and Hurrican extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished 2022) Multi-rip saw with 2 adjustable saw blades Technical details: Track gauge: 340 mm Total passage width: Maximum 950 mm (instead of 800 mm) Cutting height with/without pressure plate: 115 mm / 130 mm Hfodpjymgypsfx Am Ash Workpiece length: Minimum 450 mm Maximum saw blade diameter: 380 mm Minimum saw blade diameter: 250 mm Saw blade bore: 80 mm Saw shaft diameter: 65 mm Saw shaft speed: 3,900 rpm Motor: 30 kW Laser guides: 3 units Operating pressure: 6 bar Infinitely variable feed speed: 8–48 m/min Feed motor: 1.5 kW Voltage: 400V / 50Hz

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz Hfsdpfx Amefc R D Ao Ash -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: used, Year of construction: 1988, plate width 2000 mm plate depth 3500 mm plate height 270 mm weight 5,5 t Hodpfxeiiii Sj Am Ajfh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Table 1000 x 1000 Hsdpfxst T Rkde Am Aefh