Milling machine

AVIA FNX 30 NC

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, total height: 1,950 mm, total width: 2,250 mm, overall weight: 1,700 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 350 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, spindle motor power: 5,500 W, product length (max.): 2,700 mm, table load: 200 kg, number of axes: 3, This 3-axis Avia FNX30NC was manufactured in 2012. It features a maximum spindle speed of 3000 rpm and can accommodate tools with a maximum diameter of 125 mm and weight of 7 kg. The machine includes a substantial set of tooling stored on a blue multi-tier tool rack, a machine vice, and a protective workspace enclosure. If you are looking to get high-quality machining capabilities, consider the Avia FNX30NC universal machining centre we have for sale. Contact us for further details. - Total Power: 9.0 kW- Supply Voltage: 3x 400 V AC- Control Voltage: 24 V DC- Voltage for Machine Lamps: 24 V DC- Frequency: 50 Hz- Rated Current: 20 A- Fixed Angle Table Clamping Area: 315 x 710 mm- Fixed Angle Table T-Slots: 5 / 14 x 63 mm- Fixed Angle Table Weight: 95 kg- Fixed Angle Table Max Load: 200 kg- Vertical Console Table Clamping Area: 235 x 350 mm- Vertical Console Table T-Slots: 2 / 14 x (63/63) mm- Tool Holder Taper: DIN 2080-40 (ISO 40)- Spindle Speed Range: 50 - 3000 rpm (infinitely variable)- Quill Sleeve Bore Diameter: Ø56H7 mm- Vertical Head Manual Quill Travel: 80 mm- Vertical Head Swivel Angle: ±45°- Vertical Head Weight: 85 kg- Feed Rate X, Y: up to 5000 mm/min (infinitely variable)- Feed Rate Z: up to 2500 mm/min (infinitely variable)- Rapid Traverse X, Y: 6000 mm/min- Rapid Traverse Z: 3000 mm/min- Axis Motor Torque X, Y: 4.5 Nm- Axis Motor Torque Z: 6.2 Nm- Coolant Pump Motor: 0.2 kW- Enclosed Accessories / Equipment: Includes a substantial set of tooling stored on a blue multi-tier tool rack, machine vice, chip and splash enclosure, coolant system, and operating manual. Technical Specification Taper Size SK 40 Csdpjzmh Aqsfx Aqljrf

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel Csdsyq Sv Dopfx Aqlsrf - Horizontal milling spindle - Coolant equipment

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Codpfjtvf Htox Aqlerf Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin Csdpfx Asvdrx Ueqljrf removable, electrically secured - control panel on the substructure - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Cjdoxtmqtopfx Aqljrf Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Cedpfx Aount Ihoqljrf Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Cedpfeu Nc R Nox Aqlerf Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Crsdoxtbkuepfx Aqlsf Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, total height: 2,380 mm, total length: 1,450 mm, total width: 17,600 mm, overall weight: 3,500 kg, table length: 800 mm, table width: 480 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 20 rpm, A DMU brand and type 50 V milling center is for sale A new spindle was recently installed. The machine is in very good condition and fully operational, machining in the 100el range is possible without any problems Technical data: Brand GRUNDIG Model MillPlus Spindle speed range: 20 - 8000 Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Crsdpfx Ajrdf Eboqlef Outer length of table: 800 mm Outer width of table: 480 mm Spindle holder: SK40 Dimensions L*W*H: 2450*1760+2380 mm Weight: 3500 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Model na Csdpfx Aqsx D Dukolorf Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This DECKEL MAHO DMU 50 T was manufactured in 2002. It features a spindle mount of SK40 DIN69871, a table size of 700x500 mm, and a maximum RPM of 9000. Ideal for versatile machining tasks. Contact us for more information. Application Types Milling