Tool Room Milling Machine - Universal

AVIA FNE40 Z

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm Ledjzh Effjpfx Aftead T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t Lsdpfx Aoyq Sv Dsftsad dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Tool holder: SK40 Weight: approx. 4,500kg Operating hours: 9,521h Chip conveyor Laedpfxjxxpcvs Afted

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Lajdpfx Asul Svlsftjd Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, Laedpfx Ajucdt Ajftod 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Ljdpferb A Tcox Aftjad Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel in X-axis: 600 mm Travel in Y-axis: 450 mm Travel in Z-axis: 380 mm Quill travel in Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, including: Work area enclosure 3-axis digital display CONTUR Hydraulic tool holder for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for three-phase power 400 V, 50 Hz Ledpjhu Rwfefx Aftoad Ball screws for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guide rails Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pieces) of support elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Lajdpfextmqtsx Afted Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Lasdpfx Aoxp R D Noftsd subject to prior sale!

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3) Laodpsxapdcjfx Aftjd  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,