Used Falcon 275 for sale (990)

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm Bodpfol R Nnnox Apdedi capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 109 h, axle configuration: 4x4, mast type: telescopic, lifting height: 290,000 mm, overall weight: 3,750 kg, empty load weight: 3,750 kg, fuel type: hybrid, Equipment: all wheel drive, An authorized SUBARU dealer in Łaziska Górne has a professional FALCON FS290 spider lift from 2014 for sale. The machine was directly imported from Denmark from its first owner. Since new, it has only operated for 109 original operating hours, putting it in very good technical and visual condition. It has current inspection certificates issued in Denmark. This is a self-propelled, wheeled version, equipped with its own drive system and a reliable HONDA gasoline engine. The lift can move independently around the worksite and perform tasks without access to an external power source. The FALCON FS290 provides up to 29 meters of working height and a maximum horizontal reach of approximately 14 meters. At the same time, its minimum transport width is about 80 cm, allowing it to pass through narrow gates and standard door openings. This is an ideal machine for working in halls, warehouses, shopping centers, industrial facilities, churches, theaters, airports, and anywhere where a large reach is required in a limited space. Key information: Brand: FALCON Model: FS290 Year of manufacture: 2014 Operating hours: only 109 original operating hours Type: spider lift Version: wheeled, self-propelled Gasoline engine: HONDA - power generator Number of owners: 1 Country of origin: Denmark Current inspection certificates issued in Denmark Technical and visual condition: very good Technical data: Maximum working height: 29 m Maximum platform height: approximately 27 m Maximum horizontal reach: up to approximately 14 m with a 100 kg load Horizontal reach with a 200 kg basket load: approximately 12 m Maximum basket load capacity: 200 kg Basket dimensions: approximately 1.40 × 0.80 m Transport length: approximately 6.30 m Minimum transport width: approximately 0.80 m Transport height: approximately 1.98 m Curb weight in standard configuration: approximately 3750 kg Turning radius: approximately 3.30 m Ground clearance: approximately 25–32 cm Slope climbing ability: approximately 5–15°, depending on the machine configuration Adjustable outrigger spacing The lift has adjustable outrigger settings, allowing the working area to be adjusted to the available space: Narrow setting: approximately 3.60 × 3.60 m Intermediate setting: approximately 4.60 × 4.60 m Wide setting: approximately 5.40 × 5.40 m Bdodpfx Asz Dh R Hepdsi Key advantages of the machine: Only 109 original operating hours One owner since new Powerful and reliable HONDA gasoline engine Self-propelled wheeled drive system Ability to move efficiently around the worksite Up to 29 meters of working height Horizontal reach up to approximately 14 meters Basket load capacity up to 200 kg Compact transport width Ability to pass through narrow entrances Adjustable outrigger spacing Low weight in relation to the achieved height Ability to work over obstacles Designed for indoor and outdoor use Current technical inspection certificates from Denmark Very good technical and visual condition We offer transport within the European Union. The stated price is net and applies to export and business customers. A substantial discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: good (used), operating hours: 1,997 h, fuel type: hybrid, color: white, General information Year of manufacture: 2017 Weights Empty weight: 6.100 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Bodpfx Ajzg Nyqopdedi Dimensions of cargo space: 740 x 125 x 199 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1900 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS330Z * 2017 * 1197 working hours * Diesel and Battery * 33 meter working height * 19 meter horizontal reach * 200 kg lifting capacity * Automatic outrigger * Remote control * 6100 kg own weight * Including documents

Condition: good (used), operating hours: 601 h, mast type: telescopic, fuel type: hybrid, color: white, General information Year of manufacture: 2016 Drivetrain Drive: Wheel Functional Working height: 2.900 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS290 * 2016 •⁠⁠601 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height Bedpfx Apotxxqwsdsdi •⁠⁠14 meters horizontal range * 4 Meter negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: good (used), operating hours: 718 h, mast type: telescopic, fuel type: hybrid, color: white, General information Year of manufacture: 2018 Drivetrain Drive: Wheel Functional Working height: 2.900 cm Dimensions of cargo space: 700 x 80 x 200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Additional information Please contact Vink Machinery for more information Bdjdpfetync Ssx Apdsi Falcon Spider FS290 * 2018 •⁠⁠718 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 meters negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: good (used), Year of construction: 2018, The TREIF FALCON evolution is an advanced, high-speed industrial slicer and portion cutter for red meat, pork, poultry, and cheese – both bone-in and boneless. Introduced in 2018, the machine scans each piece with cameras, weighs it using an integrated scale, and automatically selects the cutting point to produce portions of a specified weight or thickness. This enables the production of consistent portions at high throughput and replaces manual portioning and weight control in processing plants. How does the TREIF FALCON evolution work? The product is placed on a conveyor and fed to a gripper, which guides it through the machine, while an upper clamp stabilizes the piece during cutting. Cameras scan the product from four sides, and an integrated scale measures its weight, allowing the software to combine anatomical and volumetric portioning. The blade is guided along the product’s contour and cuts slices or portions whose weight or thickness are automatically calibrated to the preset value. The portions are placed on the discharge conveyor and can be transferred to subsequent machines in the line, such as packaging, tray-loading, or freezing machines. The machine can be equipped with a pre-conveyor, a checkweigher, and sorting stations, which increase the accuracy and automation of the process. Key Benefits of the TREIF FALCON evolution The combination of high cutting speed, the 4D system, and stable product guidance delivers high throughput with repeatable precision, which limits portion giveaway and improves yield. The machine can divide product into portions in different weight categories at the press of a button, and optional software, including a Performance Pack that increases output and yield optimisation modules, lets the machine be matched to the plant’s requirements. The Premium-Hygiene-Design construction is open, and the opening mechanism and reduced accessory weight allow quick, easy cleaning and lower maintenance effort. An optional downstream check weigher (up to 300 weighing cycles per minute) with feedback control continuously regulates giveaway, while optional sorting, a robot for sorting and placement, a portioning separator, and a grouping unit reduce the need for manual work. Technical Specifications for the TREIF FALCON evolution Manufacturer: TREIF Model: FALCON evolution Type: Advanced, high-speed industrial slicer and portion cutter Year of manufacture: 2018 Power supply: 3-phase, 50/60 Hz Operating voltage: 380–480 V Bdsds Afxazopfx Apdei Control voltage: 24 V Rated current: 22–18 A Power cord fuse rating: 32 A Rated power: 11.3 kW Weight: 2,100 kg Technology: four-sided camera scanning, integrated scale, gripper, and pressure plate guiding the blade along the product’s contour Portioning modes: by weight or thickness, automatic cut calibration Maximum cutting speed: approx. 500 cuts/min Maximum product cross-section (W x H): approx. 260 x 180 mm Maximum length of the product being fed: approx. 800 mm Products: red meat, pork, poultry, and cheese, bone-in and boneless Included: double checkweigher, sorting station, outfeed conveyor, tool trolley, complete documentation

Condition: used, functionality: unexamined, machine/vehicle number: BM 86B320, ELBO VISUALIZER - DIVIDING TABLE - VISE Bdsdey Ndqxopfx Apdsi

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Bdsdj Afwy Hepfx Apdei Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: used, Year of construction: 2012, TREIF Falcon Hybrid Portion Cutter – 2012 For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system. The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery. The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision. Key Features Bdsdpfxoyux Eae Apdsi - Year: 2012 - Complete system including infeed weigher and checkweigher with automatic reject - Recently serviced - Excellent working condition - Immediately available Typical Specifications - Maximum cutting capacity: up to 550 cuts per minute - Maximum product cross section: approx. 260 × 155 mm - Maximum product infeed length: up to 1000 mm - Installed power: 11.7 kW This machine is ideal for meat processing plants requiring precise weight portioning with integrated quality control. Price: On request Location: The Netherlands Availability: Immediate For more information, photos, or a video of the machine in operation, please contact us.

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 1,850 mm, Year of manufacture: 1997 Colour: Blue Empty weight: 5.000 kg Price: On request Bdodpfx Ape Agwr Rsdei - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 9712854F - Drive system: Teach-in - Power [kW]: 14.0 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 2000 - Bed width [mm]: 360 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2500 - Options: Fixed steady, Three-jaw chuck, Travelling steady, Quick-change tool post - Transport dimensions: 4100mm x 1900mm x 1850mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2009, condition: excellent (used), Falcon / Chevalier QP2033-L Machining Center - Very good condition (hardly used) - Accessories included (tool holder, 3D probe, vices --> see photos) TECHNICAL DATA Work table Size: 1000 x 510 mm T-slots: 5 x 18 mm x 1000 mm Max. load capacity: 500 kg Travel ranges X-axis: 850 mm Y-axis: 520 mm Z-axis: 510 mm Spindle Distance from spindle nose to work table: 150 – 660 mm Spindle nose: BT40 Speed: 80 – 8000 RPM Spindle diameter: 70 mm Feed rate X, Y, Z: 30/30/24 min Accuracy Positioning accuracy: P0.014 (+- 0.004 / 300 mm) Repeatability: PS 0.010 (+- 0.003 mm) Tool changer Number of tools: 24 Max. tool diameter 76 mm / 120 mm Max. tool weight: 7 kg Dimensions and weight Dimensions: 2360 x 2060 x 2583 mm Weight: 5500 kg Bodpfoiqt S Uox Apdedi We assume no liability for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: Bdodpfxez Npz Eo Apdsi * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers Bdjdpfxez I Swfe Apdei 2 exit rollers

Condition: used, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EP Year 1972 - Serial-No. 275 Size max: 405 mm Accessories: 2-corner-pulling-heads Bjds Agpzvspfx Apdjdi Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements Bedpfjrfw Nwjx Apdedi We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: used, Year of construction: 2003, Ex-Cello XK 275 Cold Rolling Cell Bdodpsz Stlmsfx Apdei comprising Ex-Cello XK 275 cold rolling machine (2003) 45 kW drive power 1,000L hydraulic tank capacity 1,950mm maximum slide stroke 1,400+330mm or 915+815 mm maximum bar length 60mm maximum profile outside diameter 175mm maximum profile width 0,3 2,0m gear module range 56mm maximum workpiece diameter 800mm maximum workpiece lenght Felsomat FZ250 infeed and outfeed system (2003)

Year of construction: 2011, condition: used, Vacuum pump capacity: 100m³/h, final vacuum: 99.98%, vacuum chamber: aluminum, housing: stainless steel, power: 3.5kW. Machine dimensions X/Y/Z: approx. 900mm/820mm/1070mm. The machine is fully functional and has no gas flush system. Documentation available. An on-site inspection is possible. Bdedpfxoz Aggaj Apdsi

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Bdsdpfx Apjyfg D Ssdji Working hours: 15.571 h

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base Bdedpfx Aozfi Hhjpdsi diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Bdodpfx Apozzz Euedsi Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes Bjdpfx Aezlyv Tepdodi • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Bdsdoz Ipt Dspfx Apdei Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Bdjdpfx Aezycq Ajpdei Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Bodpfx Apsvl Skaedjdi Working hours: 7397 h

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Berg und Schmid Model: PERFECT 275 Machine number: 55.025 ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz SAWING DATA Speed: 1,425 RPM Saw blade diameter: 275 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Bedpfx Aps Adzkyjdsdi Width: 600 mm Height: 1,600 mm Weight: 200 kg