Pillar Drilling Machine

ALZMETALL AX 3/SV

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm Nkodpfx Ahsva Hmrsvsu distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right *

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Nksdpfjd Hy Elsx Ahvju Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: used, Year of construction: 1996, bore capacity in steel (diameter) 32 mm throat 295 mm bore stroke 140 mm 3 speeds 160 - 2250 U/min Nsdpjyclu Rsfx Ahvjku table-size 375 x 415 mm total power requirement 1,5 / 1,9 kW weight 350 kg dimensions 590 x 500 x 1900 mm Equipment: - Automatic feed - Thread cutting device - coolant device - infinitely variable speed - Adjustable drilling depth stop - EMERGENCY STOP switch

Condition: used, Year of construction: 1995, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in St 60 - full boring: 40 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg Nedpfx Ahjx U Dkcsveku dimension machine xH: 0,7 x 1,0 x 1,9 m

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm Nkodjw D Hi Topfx Ahvju total power requirement 1,9 kW

Condition: new, functionality: fully functional, Drilling capacity in St 60: 40 mm Tapping capacity in St 60: M 24 Tapping capacity in GG 20: M 30 Spindle speeds - stepless: 160-2250 rpm Short taper spindle: MT 3 Spindle stroke: 120 mm Throat: 293 mm Column diameter: 115 mm Machine table - usable surface: 515x360 mm Distance spindle/table min./max.: 117/701 mm T-slots number - width - spacing: 2 x 14 x 224 mm Feed: 0.1 + 0.2 mm/rev Machine height: 1840 mm Standard equipment: - Main switch with lockable motor protection circuit breaker - Mushroom-head emergency stop button (latching) - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Terminal block in control cabinet (no connecting cable) - Spindle guard with electrical interlock Optional equipment: Pos. 12 LED machine light with radially adjustable light beam, connection rating 230 V, protection class IP65 Pos. 20.1 Thread cutting device with foot switch, for tapping with end-stop, max. 6 threads/min. (thread cutting capacity depends on spindle speed) Pos. 25 Coolant system B, consisting of: separate tank (33 l), pump with motor protection circuit breaker, complete fittings Pos. 37.1 Nkjdpfx Ahox Sq A Toveu Digital drilling depth indicator Zero point setting (drilling start), 5-digit LED display, character height 13 mm

Condition: new, bore capacity in steel (diameter) 40.0 mm threading M 24 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 515 x 360 mm turning speeds 80 - 1125 U/min feed 0.10 + 0.20 mm/U column diameter 115 mm distance spindle /table 117 / 701 mm total power requirement 1.0 / 1.6 kW Nkedpfx Ahsxaar Roveu weight 270 kg height of the machine 1840 mm Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Condition: new, ELMAG Mobile lighting and emergency power system MBNA 100 WDE - PREMIUM series - Stage V on trailer with manual lighting mast Comprehensive control panel - Comprehensive control panel with DSE7320 control module - Start/stop via push buttons (keyless) - Digital control panel for engine monitoring - Analog displays for the most important operating parameters - 2-stage insulation monitoring - No earthing spike required! - Full integration - no increased noise level when the door is open! - Operating elements for system control - All elements permanently labeled with laser engraved labels ADVANTAGES Socket connections: Direct supply 3 Schuko 16A 1 CEE 16A-5p 1 CEE 32A-5p 1 CEE 63A-5p Socket connections: System supply 1 CEE 125A-5p Shutdown: Emergency stop Fuel level Oil pressure Temperature automatic Overload ThM-SS per connection Generator: Synchronous control AVR control Protection class IP23 E Speed governor DSE7320 4 voltmeters kW meter 3 ammeter Hertzmeter Hour meter Fuel gauge Oil drain pump Ambient lighting LED Lifting eyes Oil pressure indicator Temp. indicator Trickle charge Light mast 5m manual Nkjdst H I Srepfx Ahvju Headlights 4x RP1000LED Tandem chassis

Year of construction: 1987, condition: used, 1 pillar drilling machine ALZMETALL AX 3SV, serial no. 5739, year of manufacture 1987 Nsdpfxji Apu Ts Ahveku

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED Nkjdpfx Aoxd Trfshvju - Thread cutting device - Coolant device B Available immediately from stock

Condition: used, mileage: 1,200,000 km, power: 353 kW (479.95 HP), first registration: 01/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, * MAN TGS 26.480 tractor unit * First registration: 2008 * 1,200,000 km * Euro 4 emission standard * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Manual gearbox * Tipper hydraulics * Unladen weight: 9,550 kg * Wheelbase: 3.20 m * Schwarzmüller semi-trailer, 24 m³ * First registration: 2008 * Lift axle * Sliding tarpaulin Njdpfx Ahjw A Ut Roveku * BPW ECO PLUS axles * Permissible gross weight: 5,900 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Njdowylvqjpfx Ahvsku Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: new, Column drilling machine Make: ALZMETALL Model: AX 3/SV Condition: New machine Speed 80 - 1.125 RPM serially equipped with: - Speed adjustment, infinitely variable - Speed display, digital - feed overload protection - spindle protection Nodpfx Ajb Archehvsku - Instruction manual further important technical data: - 40 mm drilling capacity in ST 60 - 120 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - feed rate 0,1 + 0,2 mm/rev - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever Nedpjq U Swgjfx Ahveku - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)