Circular sawing machines

Altendorf TKR 90

Condition: good (used), Year of construction: 1988, Altendorf TKR 90 panel saw Year of manufacture 1988 Mach. No.: 88-11-153 Motor 11.0 KW / 400 Volt Cutting length 1400 mm Hnsdpfx Ahjvxhile Nsg Cutting width 1000 mm Max. saw blade Ø 450 mm Max. cutting height 155 mm Speeds 3000/5000 rpm Parallel protection device Table extension

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Hnodpfx Ahow T Sc Nj Nog Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Hsdpfjipvrbjx Ah Njng Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg Hsdpeu R Sx Eofx Ah Njng - new exhibition machine -

Condition: used, machine/vehicle number: G-KR114450H, SCM panel saw, good condition, 5.5 kW, approx. 700 kg Hnodpfxevw Ec Hj Ah Neg Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Belt sander LANGZAUNER Type LZG Sanding table dimensions approx.: 2500 x 800 mm Sanding belt dimensions approx.: 6800 x 150 mm Motor power approx. 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of the sanding belt Sanding belt cover on top Light bar for the work area CE Hedsuxnyuspfx Ah Njng Incl. special sanding pad Incl. extraction fan NEW GRAPHITE CLOTH Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition Hnsdpfxerigxys Ah Njg

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg Hnsdpfx Ajumpp Eoh Nsg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Hodpfxovxhlgo Ah Neng Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change Hnodpfx Aork Tqkeh Nog - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term Location: Solingen