SCM panel saw used

SCM G-KR114450H

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles Gusdjrigxyopfx Ak Usg feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Guedeyabltspfx Ak Ueg

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: Guedpfxjk D Ewge Ak Ujg - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): Gedpfeyxn Tiox Ak Uoug No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Guedpfx Ajrb An Ujk Ueg Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: new, Year of construction: 2026, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Godpoyr R Hwofx Ak Usug Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. Guodpfoyfgrpox Ak Ujg In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm Guodpfxohfufgj Ak Uog -Weight: 1058 kg

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm Gusdpfxjxq N T Eo Ak Uog 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: new, Year of construction: 2026, CORMAK BDS 6x9 Wood Sander – Versatile Belt and Disc Sander for Precision Woodworking The CORMAK BDS 6x9 wood sander is a versatile workshop machine combining the functions of a belt sander and a disc sander. Designed for precise processing of wooden and wood-based components, it is ideal for craft workshops, model-making studios, and service facilities. Thanks to its compact design and robust components, the machine provides high accuracy and flexibility for a wide range of sanding applications. Main Advantages of the Machine Combined belt and disc sander – vertical and horizontal belt operation increases the machine’s versatility. Precise angle sanding – achieved with the adjustable work table and linear angle gauge. Compact dimensions – space-saving design, ideal for smaller workshops. Stable construction – grey cast iron base minimizes vibrations and improves working accuracy. Effective dust extraction – a 60 mm dust outlet allows connection to an extraction system. Design and Technology The sander is equipped with a durable grey cast iron base, providing high rigidity and resistance to deformation. The 310 × 190 mm work table ensures stable material support, while its adjustment range of 0°–45° enables accurate bevel sanding. The graphite belt support provides smooth and consistent belt movement, resulting in excellent surface finishing quality. Precision and Work Efficiency The CORMAK BDS 6x9 delivers high sanding precision thanks to the high operating speeds of the sanding disc (23 m/s) and sanding belt (5.5 m/s). This allows efficient material removal and surface preparation before further processing or painting. The motor with a power rating of 550 W (S1) / 750 W (S6) provides optimal performance while maintaining low noise levels and efficient energy consumption. Applications The BDS 6x9 model is suitable for: woodworking and craft workshops, restoration and conservation studios, model-making and handicraft applications, Gjdevugrkepfx Ak Ujug technical schools and training centers, repair and maintenance workshops. Standard Equipment Belt and disc sander with 230 V motor Adjustable-angle work table Linear angle gauge Graphite belt support Ø60 mm dust extraction outlet Polish-language operating manual (DTR) Optional Equipment Dust extraction system Replacement sanding belts and discs Mobile stand Technical Specifications Parameter Value Sanding belt size 1220 × 150 mm Sanding disc diameter 225 mm Work table size 310 × 190 mm Maximum sanding length 590 mm Dust extraction outlet diameter 60 mm Angle sanding range 0°–45° Belt speed 5.5 m/s Disc speed 23 m/s Motor power S1 S1: 550 W / S6: 750 W Power supply 230 V Weight 54 kg Warranty 12 months Manual (DTR) Included