Multiblade

A.Costa LINCE 5/25

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension Ndodpfxjgr Er Ss Abgjd electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit Ndsdpfxoidi Ivs Abgod - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: used, cutting length: max. 4.000 mm saw blade ø: 400mm (max. 450mm) Nsdpsp E I S Rjfx Abgsdd Length adjustment: Manually Angle adjustment: Manually Double-sided mitre saw Düspohl DGK 400 B for two-sided mitre cuts with saw unit from above and additional horizontal cutter (cornice function).

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer for sale a wide-belt sander SANDYA 16-S RRCS 1350 The machine is fully operational and has seen little use. It was utilized as an auxiliary machine for non-standard projects. STANDARD EQUIPMENT * Control panel * Electric adjustment of working height * Digital display of working thickness * Feed belt made of natural rubber * Automatic centering and tensioning of the feed belt * Movable rubber pressure rollers before and after the working units * Flexible steel pressure bar in front of the first working unit * 2 roller supports with 2 non-driven rollers at the machine's infeed and outfeed * Electronic oscillation of the sanding belt * Extraction sockets designed to reduce air consumption * "Hand guard" – emergency device at the material infeed * Safety switches at the front and rear of the machine * Lockable main switch * Automatic “star-delta” switch for the main motor * Overload protection for the main motor * Automatic brake for instant shutdown of the working units * Automatic emergency stop in case of: - sanding belt breakage - lack of tension in the sanding belt Njdjwq Efmepfx Abgjdd - lateral displacement of the sanding belt - lack of compressed air - main motor overload * Electric motors with IP 54 insulation class TECHNICAL DATA - Working width: 1,350 mm - Min./max. working thickness: 3–170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: -B/23 * Reading bar for sectional pads, 23 sectors FIRST UNIT "R" - Calibrating steel roller, diameter 200 mm, 18/5 kW - Pneumatically activated On/Off selector for the first roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Oscillating blower for cleaning the sanding belt of the first unit Complete with: • Electronic positioning • Timed activation linked to the presence of the workpiece • Extraction port • Filter and pressure regulator SECOND UNIT "R" - 250 mm diameter, 55SH rubber sanding roller, 15 kW - Pneumatically activated On/Off selector for the second roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Reverse motion for the second unit THIRD UNIT "CS" - 175 mm diameter sanding roller - Electronic segmented pad on the third unit Includes LOGIC TS electronic programmer • Distance between segments: 60 mm • Working pressure adjustment - Pneumatically activated On/Off selector for the third roller Roller supports at infeed and outfeed for long elements Fixed cleaning unit at the outfeed Electronic positioning of the worktable The machine was purchased new from an authorized SCM Poland dealer and has always been serviced by authorized SCM service. The last calibration was performed on 16.01.2025 Machine available from mid-July Number of operating hours: 589h

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Njdou Hlzfspfx Abgedd Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: used, machine/vehicle number: 006530, Max. machining width: 1300 mm Min. machining thickness: 3 mm Nsdpswcybmjfx Abgjdd Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 8 Nr

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 3,200 mm, spindle diameter: 60 mm, spindle speed (max.): 6,000 rpm, power of the milling unit: 7,500 W, rotational speed (max.): 6,000 rpm, total height: 600 mm, space requirement width: 8,000 mm, space requirement length: 7,000 mm, overall weight: 15,500 kg, milling spindle length: 600 mm, saw blade diameter: 400 mm, power: 70 kW (95.17 HP), input voltage: 380 V, height adjustment type: electric, power of feed motor: 7,700 W, working height: 120 mm, working width: 160 mm, high-performance window production machine, with 2 tappers and two right and one left profiling shaft, produces direct windows in thicknesses of 68-88-130 mm. Delivery by appointment Ndedpfstp Dngsx Abged

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: LB431013A, working width: 1,350 mm, overall weight: 7,200 kg, power: 79 kW (107.41 HP), type of input current: three-phase, input voltage: 400 V, The Costa Levigatrici K7 CCCFF 1350 is designed for wood surface processing, including sanding, scaling, and brushing of solid wood, veneered, or laminated components. With a working width of 1350 mm and a high installed power of 79 kW, it is suitable for industrial use in woodworking shops, furniture factories, or production lines. It ensures high precision and excellent surface finish. We have two units of this machine, both manufactured in 2014. Ndsdoxm R Szjpfx Abgsd Technical Data: Power supply: 400 V / 50 Hz Installed power: 79 kW Year of manufacture: 2014 Total weight: 7.200 kg Working width: 1350 mm