Hydraulic press

A. Lindenberg LP

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h Dcsdpfx Asu Nwfbjb Tsr control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: used, Steuerkarten für Schneidmaschine Polar 115 CE Dedpfsq Rx Syjx Ab Tocr Control Cards for Guillotin Polar 115 CESchaltpläne / Eletric diagram 115CE - E - 10 - 50 -Polar 012720 - Card 1 Polar 015099 - Card 2 Polar 012765 - Card 3 Polar 012991 - Card 4 Polar 015773 - Card 8 Polar 023467 - Card 9 Polar 015291 - Card 7 Polar dc429 - Card 11 Polar 015130 - Card 12 Polar 012384 - Card 13 Polar 012388 - Card 14 Polar 011245 - Card 15 Polar 012352 - Card 16 Polar 011442 - Card 19 Polar 011363 - Card TI Polar 011364 - Card TII Polar 011365 - Card TIII Polar 015138 - Card B1 Polar 011438 - Card 211825 Polar 011423 - Card 17 Polar 011422 - Card 18 Polar 011308 - Card 20 Polar 011440 - Card 21 Polar 011439 - Card B3 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), machine/vehicle number: 4105, Grinding area: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Weight: about 380 kg Dcodpjh Ugwvjfx Ab Ter Cup wheel Ø: 180 mm

Condition: excellent (used), Year of construction: 2010, Our industrial robots are thoroughly inspected and tested before delivery and are ready for immediate use. Dcsdpfx Ajwl Ntwjb Ter Robot comes complete with: - Control cabinet - Teach panel - Connection cable

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Dcjdpfoxndynox Ab Tjr Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Dodpevca Nrjfx Ab Tjcr Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organization.

Condition: like new (used), Year of construction: 2018, operating hours: 2,000 h, DKP400v1(2018) + KR16(2008) + KRC2(2008) Dedjrn S S Ropfx Ab Tecr

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Dcsdporfww Nofx Ab Tjr

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm Dsdpfx Ajrgptieb Tecr - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Dcsdpsvuk Iijfx Ab Tjr