Year of construction: 2019, Condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: - Stroke 30 mm - Air consumption per stroke 5 l - Pneumatic connection 8 bar - Space requirement approx. W 500 x H 550 x D 500 mm - weight approx. 70 kg - with: - foot switch Cro Iaeiv Hz Ds Ttiueb - machine base mobile W 600 x H 830 mm - Div. tools HUECK

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Crj Ia Tteuxx Usiuob Press Depth 30 mm Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Year of construction: 2020, Condition: as good as new (ex-display), Elumatec TS161-21 table saw: - Precise work due to saw cut from below - Large swivel range up to 45° to the left and up to 0° to the right The special swivel mechanism with integrated rotary table allows working from the front at all angle settings - A workpiece fence that can be moved to the rear enables optimum utilization of the saw blade capacity for wide and flat profiles - Manual saw feed - Saw blade and base included as standard - Pneumatic material clamping device (vertical) Crs Ijm Hav Uja Ttiujb - Dosing spray device - Maintenance unit Elumatec AMS E355 processing length: 6m - For exact cutting to length of PCV and aluminum profiles - For attachment to all single head saws - Patented rail and carriage system - Length: 6000mm - With automatic cutting length adjustment Technical data E355: - Drive independent absolute measuring system - positioning accuracy + / -0,1mm - Pneumatic blocking on position - memory for 999 data sets - correction values for profiles - Interface RS232

Year of construction: 2002, Condition: good (used), 4-axis machining center With the Comet, aluminum profiles, PVC materials and steel profiles up to 3 mm can be processed at any angle from 0-180°. Travels: X - axis: 6300 mm Y - axis: 525 mm Z - axis: 335 mm A - axis: 0° - 180° (infinitely variable) max. profile length with reclamping: 12000mm max. profile cross-section: 250x200mm with a tool length of tool length of 80mm Positioning: X - axis: 80 m/min Y - axis: 60 m/min Z - axis: 30 m/min A - axis: 10,800 °/min High-frequency milling motor 7 kW (at 21000 rpm) up to max. 24000 rpm, water-cooled Automatic tool changer with 8 + 1 places, HSK 40E collets, max. tool diameter 50mm, max. tool length 160mm Cro Iaou Rry Ns Ttiuob With 8 clamps

Year of construction: 2008, Condition: good (used), BJM Cutting Centre: used for alu profiles up to 7m length (and suits well for PVC too). - VMU input - SZ-AF cutting centre - RF output Co Ijvv T Rpoa Ttiuorb

Year of construction: 1999, Condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Cj Ia Tsvmz R Sstiuorb Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1996, Condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays Co Iemb U E Aja Ttiuorb - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, AVAILABLE IMMEDIATELY CNC-controlled two-head double mitre circular saw for the efficient cutting of profiles made of aluminum, non-ferrous metals and various plastics. The machine can be used for single cuts - to saw the profile with two saw heads at the same time - or in automatic mode - here the two-head saw becomes a single-head sawing machine Pneumatic miter adjustment of the saw heads to preset stops, miter angle continuously programmable between 22.5° - 135° (left saw head) and 135°-22.5° (right saw head) Saw blade drive power 2 x 2.2 kW Saw blade diameter Ø 550 mm Largest cutting length - sawing with both saw heads at the same time 5,015 mm Smallest cutting length - sawing with both saw heads at the same time 380 mm Largest / smallest cutting length in automatic mode unlimited (the profile is pushed and pulled) Crs Iaevv Nbqo Ttiueb Length of the moving roller conveyor 2,300 mm Maximum space requirement - approx. 8.2 m (saw unit on the far right x 1.85 m x H 1.4 m Weight approx. 1,200 kg - CNC control with touch screen, with the option for quick input of values - Simple and quick creation of cutting lists - Control panel can be moved on linear guides - Linear guides for moving the right saw unit - Automatic spray lubrication

Year of construction: 1994, Condition: good (used), multi-function punch, punch, hole punch, pneumatic hole punch Cre Ia Tsvmq Utetiujb -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 210/210002, travel distance X-axis: 2,500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 18,000 rpm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 90 °, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis (longitudinal): 2,500 mm Y-axis (transverse): 200 mm Z-axis (vertical): 180 mm A-axis (profile rotation): -90° | 0° | 90° Positioning speed X-axis: 64 m/min Y-axis: 64 m/min Z-axis: 40 m/min A-axis (rotation): 60°/s Spindle Maximum power: 4.5 kW Maximum speed: 18,000 - 24,000 rpm Tool holder type: ISO 30 Cooling type: electric fan Compressed air Pressure: 6-8 bar Flow rate: 18 gal/min Tool magazine Manual tool magazine: available Maximum tool capacity: 4 Machining units Direct tool use (top surface): 3 Profile positioning Right-hand pneumatic profile reference alignment: available Control Touch screen: 15" industrial PC Working area Standard number of clamps: 4 Manual clamp positioning on X-axis: available Lubrication of the tool processing area: present Safety barrier (light barrier): optional MACHINE DETAILS Total weight: 1,650 kg Total length: 3,415 mm Total width: 1,615 mm Co Ia Ttijvvvnwjujrb Total height: 2,020 mm Electrics Power: 9.6 kW Current: 30 A Voltage/frequency: 400 V / 3~, 50 - 60 Hz EQUIPMENT - Documentation and manual - Manual clamping positioning - Industrial PC with Windows-based touchscreen interface - Data transfer via remote network connection, Ethernet and USB - High processing capacity to increase efficiency - Automatic lubrication in the processing area

Year of construction: 1997, Condition: used, - for window and door profiles made of aluminum and PVC - milling spindle length (mm) 90 Cj Ia Ttelkfu Ueiuorb - cutter diameter max (mm) 250 - milling depth up to (mm) 80 - Milling width (mm) 330

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top press and blade movement is hydraulic - mm ruler system is available for height and feed of the blades - Centering miter wedge is hydraulic Crs Ia Torbk Tfetiueb - Drain button available for fine adjustment - Hydraulic press and 2 pedals are used for profile clamping - There is polyamide sheet to prevent damage to profile surfaces - Right and left handles available for profile support

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar Cre Ia Ttiotq Takeueb - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Crs Isvvu S Isa Ttiujb Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position Cj Ia Ttijra Nrqsujrb - Pneumatic profile clamping system - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor

Year of construction: 2000, Condition: good (used), machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table Crj Iaju Rarts Ttiuob - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Year of construction: 2025, Condition: new, machine/vehicle number: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, - Conforms to CE standards - It is a machine that can perform door, sash, arm barrel and triple drilling of aluminum and PVC profiles. - CNC control 10" touch screen - 3 independent axes (AXIS) - Cooling system for aluminum profiles Cro Ia Ttijra Nyboueb - Metering system with right and left arm and rest - Precise operation thanks to linear slide system - Ability to adjust the speed settings of all processes - Easy switching from touch screen to Aluminum Pvc profile and automatic change of speed settings - Unlimited memory capacity - Automatic protection cover for safety - Servo motor system in X, Y, Z axener

Year of construction: 1992, Condition: good (used), machine/vehicle number: 9464, Lg.No. 22351 Cre Iaoidp Uvj Ttiusb Technical data: - Pressure capacity at 10 bar 35 KN - ram stroke 12 mm - throat 95 mm - Installation height approx. 134 mm - table size approx. 230 x 190 mm - Air consumption per stroke 8,0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - foot switch - machine base - pressure gauge + pressure regulator - SCHÜCO tools 283073 , 293901 ,293902 , 296162 , 296168 , 296199 , 297755

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment Crj Ia Ttsrbiv Ajiueb - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxxx, Cutting to length - and mitre - rafter cut - circular sawing machine Technical data: - Saw blade dimensions 300 x 3.5 x 40 mm - Horizontal mitre adjustment 45° - 90° - 20 Crj Iaef H Arqj Ttiuob - Vertical mitre adjustment 60° 90° - 45 - Cutting range - at 90° W 380 x H 85 mm - at 45° W 265 x H 85 mm - at 45° inclined H 65 mm - Saw blade speed 2750 rpm - Drive 220 V - Space requirement approx. W 700 x H 1400 x D 1400 mm - Weight approx. 180 kg - with: - hydr. feed brake - Saw blade

Year of construction: 2025, Condition: new, machine/vehicle number: ALÜMİNYUM İŞLEME CİFT KAFALI MAKİNE SETİ, - Provides 80 - 120 window production in 8 hours working environment. - It is our set that provides fast production to the customer with different machine options. - 380 volt or 220 volt options are available. - Complies with CE (European) standards Crj Iaerfy Exe Ttiueb - Prices delivered to anywhere in the world - Former customers from your country who will be your reference MACHINE CONTENT - SC 4000 S Full Automatic Servo Motor Double Corner Aluminum & PVC Cutting Machine (Ø550 mm saw) - SC 5000 S Aluminum & PVC 3 Axis Cnc Milling Machine - SC 211 Aluminum & PVC Center Register Lapping Machine (2 Blades) - SC 902 S Hydraulic Aluminum Corner Press - 2 Year Warranty - There is no program fee for CNC Machines and remote profile introduction is available.

Condition: used, Year of construction: 1995, machine/vehicle number: 9104, Offer 24237 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - horizontal 400 x 3.5 x 40 mm - Notching range / notching depth vertical 135 mm - Notching range / notching depth horizontal 105 mm - Notching width at 90° up to 280 mm Ce Ijub Sl Dja Ttiuerb - Notching width at 30° up to 100 mm - Vertical saw blade can be manually tilted 90° - 30° via handwheel - Can be used as a shifter saw without horizontal saw blade - Profile stop shoulder 30° - 90° - 30° tiltable - Digital display - Pneumatic material clamping vices - Pneumatic coolant testing device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Year of construction: 1990, Condition: good (used), machine/vehicle number: 8988, Offer 22523 Cre Iaek Rugvs Ttiuob Technical data: - Pressure capacity at 10 bar 35 KN - ram stroke 12 mm - throat 95 mm - Installation height approx. 134 mm - table size approx. 230 x 190 mm - Air consumption per stroke 8,0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - weight approx. 100 kg - with: - foot switch - pressure gauge + pressure regulator - 4 x punching tool

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00512S42, Offer 24379 Precision deburring and beveling machine / edge trimming machine Technical data: Steel - Stainless steel - Aluminum - Plastics ,- Processing Deburring and faceting process is carried out with milling cutter Ce Ia Tsud Ngqstiuorb Facing cutterhead with indexable inserts Motorized feed module Bevel angle adjustment 45 ° Continuously adjustable bevel width 0 to 10 mm Speed 2800 rpm Drive 400 V / 1.5 kW Space requirement approx. W 600 x D 750 x H 950 mm Weight approx. 90 kg

Year of construction: 1994, Condition: used, machine/vehicle number: 20542, Lg.no. 24238 Technical data: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l Co Ia Ttioviuk Reusrb - Air inlet 6 - 10 bar - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg - with: - Foot pedal - original machine base frame - Pressure gauge + pressure regulator - Round shuttle table for 6 punching tools - Various punching tools