Used walking floor / moving floor semitrailers for sale (129)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Rsdpfsi Riwxex Apdjch Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, empty load weight: 8,367 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 87 m³, suspension: air, tire size: 385/65R22.5, | Knapen K600 moving floor | Side doors | 13 pairs of lashing rings in the side profile | Roll-up tarpaulin, standing platform | BPW axles with disc brakes | 1 axle lift | Spare wheel holder | Alloy rims (ALCOA Ultra One aluminium rims) | Toolbox | Dead weight: 8367kg | 6mm floor, 21 boards | Additional hydraulic connections mounted on the support legs including mounted hose guide | Rim size 22.5 x 11.75 | | PRICE EX WORKS Errors, input and advance sales excepted. Redpfxjv Tnhds Apdsch

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 59 m³, Year of construction: 2026, Equipment: ABS, Aluminum Maximum Kingpin Load (t) 12 Axle Load (t) 8 Axle Track (mm) 1310-1310 Saddle Height (mm) 1150 Chassis Width (mm) 1200 Loading Width (mm) 2475 Technically Permissible Total Weight (due to design) Wheelbase (mm) Sliding Floor Trailer 6250 Internal Height Front (mm) 2,300 Internal Height Rear (mm) 2,300 Loading Length (mm) 10613 Overall Width (mm) 2550 Volume (m³) 60.41 Overall Length (mm) 11,420 Offset (ET) 120 Option 1: Axle with Lifting Axle and Starting Assist Starting Assist Activation: via button in the truck (button mounting not included in the equipment scope) and by pressing the brake pedal three times. Option 3: Axle with Lifting Axle and Optiturn Activation of the additional lifting axle: controlled via Wabco Smartboard. Brake pad wear indicator connected. ECAS air suspension with raising and lowering valve. Lowering of air suspension via Smartboard, as well as raising and lowering valve. Pneumatics: European Palm coupling. EBS operation. Smartboard. Air and electrical console in the center with gantry. Outrigger winches: Aluminum drop-side supports. Tires: 385/65R22.5 Tire Pressure Monitoring System: Wabco OptiTire. Rims: Alcoa Dura Bright. TPMS Sensor Type: Rim-mounted sensor. TPMS Sensor Supplier: ZF. Lighting Type: ECOLED III. 2 LED rear lights, at the rear on the left and right sides in the direction of travel. Position: Work lights (operated via switch) 2 LED rear lights at the rear on the left and right sides in the direction of travel. Work lights: 2 LED rear lights at the front on the left and right sides in the direction of travel, in the area of the outrigger winches. Position: Work lights 1 inside on the front wall on the left. Lighting Unit Protection: One-piece splash guard. LEDs in the door seal cross member: 2 x 3 LEDs. Operation: Underrun protection. Hydraulics. Position: Control console on the left side of the sliding floor. Hydraulic Coupling: SKL. Hydraulic Coupling - Size: 1. Hydraulic Coupling - Gender: Female. Hydraulic Coupling Return: SKL. Hydraulic Coupling Return - Size: 1. Hydraulic Coupling Return - Gender: Female. Hydraulic Coupling - Hose: 3,000 mm. Hydraulic Coupling - Position: Connection possibility on the front wall. Hydraulic Coupling. Hydraulic Position: Pressure return, pressure on the left, return on the right. Suspension of the hydraulic hose with springs: Yes. Redpfx Aps Agxxvjdech Mudguards. Toolbox on the left: Plastic. Aluminum extension ladder: 2.5 m extendable - on the right. Broom and shovel holder: with 3 holders each, on the left. Front wall inclination (°): 90. Rear wall inclination (°): 90. Material of the approach plate: Aluminum. Distance: Lower edge profile to upper side wall at the rear: 2,308. Profile: Front wall: 3 mm - 2 mm. Service door: On the left in the direction of travel - opens outwards (safety aspect). Profile: Side wall: 3 mm - 2 mm. Sliding Floor System: Manufacturer: Cargo Floor. Operation: Floor system: Radio remote control. Sliding Floor System: CF 500 SL-C - E-CONTROL. Number of floor profiles: 21. Type of floor profile: 11 mm smooth overlapping. End plate: Sliding floor: Aluminum. Mounting of end caps: Welded. Oil temperature sensor for sliding floor system. Residue-free discharge wall. Type of residue-free discharge wall: Aluminum. Residue-free discharge wall: Brushes. Storage of residue-free discharge wall: 6 wheels with bidirectional cleaning. Rear door. Rear wall type: Swing doors. Rear wall: Aluminum. Swing door design: 1/2 to 1/2 split, with door seal cr

Condition: new, axle configuration: 3 axles, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, farmSTAR 60.4 cbm Silver gray Chassis material: Aluminum Chassis type: Sliding floor Axle spacing (mm): 1310-1310 Kingpin height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Internal height front (mm) (IHF): 2,300 Internal height rear (mm) (IHB): 2,300 Loading length (mm): 10613 Height of chassis neck (mm): 240 Overall width (mm): 2550 Volume (m³): 60.41 Overall length (mm): 11,420 Disc brake Number of axles with spring brakes: 2 Offset (ET): 120 Rcsdsz Shv Ijpfx Apdeh Option 1: 1st axle with lift axle and starting aid Activation of the starting aid via button in the truck (button mounting is not included in the scope of supply) and by pressing the brake pedal three times Option 3: 3rd axle with lift axle and Optiturn Activation of the additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h ECAS air suspension with raising and lowering valve Lowering of the air suspension via Smartboard, as well as raising and lowering valve Coupling head: Pneumatic, European Palm coupling Control console: EBS operation, on the left-hand side in the direction of travel, behind the axles Standard Smartboard Air and electrical console in the center with gantry Outriggers: Aluminum telescopic supports Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome with STAS logo Manufacturer of lighting: Aspöck Type of lighting: ECOLED III - with STAS logo Rear lights: 2 LED rear lights, mounted at the rear in the direction of travel, left and right on the lamp carrier Position of work lights (operated via switch): 2 LED rear lights at the rear in the direction of travel, left and right, mounted behind the axles Position of work lights (operated via switch): 2 LED rear lights at the front in the direction of travel, left and right, mounted in the area of the outriggers Position of work lights (operated via switch): 1 piece inside on the front wall in the direction of travel, on the left Protection of the lighting unit: One-piece mudguard LEDs in the door closure cross member: 2 x 3-function LED Underbody protection Operation of underbody protection: Fixed underbody protection Splash guards: Black with STAS logo Hydraulics Position of control console: Sliding floor, left, in front of the axles Hydraulic coupling: SKL Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling return: SKL Hydraulic coupling return - Size: 1 Hydraulic coupling return - Gender: Female Hydraulic coupling - Hose: 3,000 mm Hydraulic coupling - Position: Connection possibility on the front wall (also with connection possibility on the outriggers) Hydraulic coupling - Design: Standard design Hydraulic positioning: Pressure return, pressure left, return right (CON) Suspension of the hydraulic hose with springs: Yes Toolbox Air connection in the toolbox Aluminum extension ladder: 2.5 m, extendable - on the right in the direction of travel Profile of the front wall: 3 mm - 2 mm Service door: On the left in the direction of travel - opens outwards (safety aspect) Profile of the side wall: 3 mm - 2 mm Sliding floor system: Manufacturer: Cargo Floor Operation of the floor system: Remote control Sliding floor system: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 11 mm smooth, overlapping End plate: Sliding floor, Aluminum Mounting of the end caps: Welded Oil t