Used walking floor / moving floor semitrailers for sale (172)

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2013, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, German semi-trailer, lift axle, Mercedes axles, 1st axle liftable, further information by phone: Christian Bredemeier Gjdpfsyq U A Tex Ab Deit

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: white, Year of construction: 2026, Fully equipped: - Aluminum chassis - Remote control - Small door in front wall - Wear plates on floor and side walls - Smartboard - Side protection tarpaulin - Durabright aluminum rims = Further Information = General Information Year of manufacture: 2026 Axle Configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; lift axle; left tire tread: 100%; right tire tread: 100% Rear axle 2: Alloy rims; left tire tread: 100%; right tire tread: 100% Rear axle 3: Alloy rims; left tire tread: 100%; right tire tread: 100% Weights Unladen weight: 7,721 kg Payload: 34,279 kg Gross vehicle weight: 42,000 kg Further Information Giedpfxeyq Rtbj Ab Djt Contact Mark van der Steen for more information.

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2026, Year of construction: 2026, Equipment: ABS, Legras SBS 2220 Moving Floor Trailer 90 m³ * SAF axles * 90 m³ loading volume * Disc brakes * Lift axle on the first axle * Air suspension * Pneumatic control * Load pressure gauge * Rolling tarpaulin * Side safety tarpaulin * Folding fender for lighting system * LED lights * ADR-approved wiring * Maintenance hatch front left * ABS connector * 2 x 7-pin power sockets * ISO air couplings with red and yellow coupling heads Gijdpeyfzicofx Ab Det * Toolbox * Access ladder and platform on front wall * Double-wing rear door * Maintenance hatch front left Interim sale and errors excepted! Sale only under our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transmission errors within the systems of different platform providers. Therefore, we expressly point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer according to §145 of the German Civil Code (BGB), but rather serves as information for contract initiation. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2026, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, 3-Axle STAS Walking Floor Semi-Trailer 91.5 cbm NEW VEHICLE Gjdpfx Asyih R Ssb Deit Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis made of hot-dip galvanized steel SAF axles with large 430 mm disc brakes. Reinforced design “CD” WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard with axle load display 1st axle lift axle 3rd axle steering axle Air tanks made of aluminum Tyres: 6 x 385/65 R 22.5 JOST crank landing gear, full load version ASPÖCK full-LED lighting 4x LED work lights Toolbox rear left Side walls – profile joints inside fully welded CARGOFLOOR moving floor with 21 slats, material thickness 10 mm corrugated Operation with RADIO REMOTE CONTROL Rear closure plate made of stainless steel 3 crossbars, reinforced waste transport design Roof roll tarp reinforced version Panama 900 g 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear crossbar pivotable, can be unlocked from underneath! Optimal for bale transport RENTING is the new BUYING – also available immediately with full-service rental!

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2026, Hydraulic hoses 4400 mm, 2x T'Edbro couplings, screw fittings, pressure 1", return 1". 3 x 9 ton BPW OFF Road axles, 1st axle as lift axle, axles center-mounted with axle load indicator. 6-piece tires 385/65 R 22.5, steel rims 11.75 x 22.5 / ET 0, disc brakes ø 430 mm, mechanical landing gears, foldable SSV, toolbox with triple-lock system. Aluminum superstructure 3/2, standing platform with ladder access on the left, floor profile type 10, CLEENSWEEP separation tarp with hydraulic drive at the front wall, hydraulic Ecotop cover. 3 x 9 ton BPW OFF Road axles, disc brakes ø 430 mm, axles center-mounted with axle load indicator, steel rims 11.75 x 22.5 / ET 0. Gedpfxeynp S Re Ab Doit

Condition: used, empty load weight: 8,270 kg, maximum load weight: 27,730 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 03/2026, loading space volume: 92 m³, total length: 14,040 mm, suspension: air, color: green, gearing type: mechanical, Equipment: ABS, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Giodpjynkmijfx Ab Djt

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Gjdpfevx E N Aox Ab Deit Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: used, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 05/2026, total width: 2,550 mm, Equipment: ABS, German semi-trailer 1 owner Walking floor Hydraulic protective tarpaulin over the trailer Giodpfx Abeym Hypo Det Hydraulic tailgate Lifting axle

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles Gsdsym En Sjpfx Ab Doit - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors - ABS/EBS - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor Trailer K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross vehicle weight rating: 36,000 kg 202003-0071956-r_order-configur? * Maximum axle load: 24,000 kg * Maximum kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st/2nd axle: 1,310 mm * Axle spacing 2nd/3rd axle: 1,310 mm ----Axles & Running Gear 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control panel on the left before the axles * Axle function as lift axle, fully automatic via EBS * Including traction aid (3x brakes) * Radio remote control for lift axle ----Tyres & Wheels* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Bodywork Closed side walls left and right * Sliding partition wall (minimum ground clearance 100 mm) * Rear doors with external locking bars * One locking bar per door * Steel top rail, extendable left and right * Platform at front bulkhead * Ladder on front bulkhead left and right * Standard roof bows Ø 60.3 mm (4 pieces) * Bow space: 3 x approx. 4,100 mm * Curtain 680 g/m² (RAL 9006 White Aluminium) * Curtain supports 3-position (4 pieces) * Tensioning straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric operation * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Mounting Parts JOST landing gear with thrust compensation * Plastic toolbox left in front of axles (1,000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Contiguous side underrun protection * Swinging mudflaps * Antispray mat on 3rd axle * Long rear-mounted ladder with extendable stair and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulation Gisdpfx Absymhxgs Dst * LED work lights at rear (radio-controlled) * LED work lights on landing gear (radio-controlled) * LED LCG-2 switch unit ----Hydraulics / Connections ISO-N and ISO-S plug + 15-pin connector * Knapen Trailers V1 radio remote control * Hydraulic connections centrally on front bulkhead (vertical) * Pressure line left, return line right * Additional hydraulic connections at landing gear * Brake connections present * Audible reversing alarm (manual setting) ----Paintwork Bodywork in RAL 7011 Iron Grey * Wheel hubs in RAL 2008 Light Red Orange * Chassis and underside unpainted For further information, please feel free to contact me.

Condition: used, maximum load weight: 29,278 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 10/2026, loading space length: 10,030 mm, loading space width: 2,450 mm, loading space height: 3,800 mm, loading space volume: 61 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Knapen K200 moving floor 61m³ with rotary airlock * SAF axles with air suspension and disc brakes * 1st axle as lift axle * Alcoa aluminum rims * 385/65 R22.5 tires * Roof roll tarp Gisdpox Hb N Hjfx Ab Det * Grain slides in left and right rear doors * Work platform on front wall * 4x work lights * Remote control * Jost landing legs * Stainless steel toolboxes * 6 mm floor * Heitling rotary airlock For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 31,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 89 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, 3-Axle Kraker CF-Z Cargo Floor Walking Floor Trailer 89 m³ VIN: 16069337 Chassis / Attachments: * Air suspension / Raise & Lower * Lift axle: 1st axle * BPW landing legs * WABCO Smart Board * Tires: 385/65 R22.5 * Remaining tire tread: Front approx. 10/50%, Middle approx. 20/80%, Rear approx. 70% * 3 x BPW axles with disc brakes * PVC storage box Body: * Walking Floor system by Cargo Floor * Volume: approx. 89 m³ * Sliding roof tarp * Standing platform with walkways on left and right Weights: * Gross weight: 39,000 kg * Payload: 31,400 kg * Unladen weight: 7,600 kg Other: * German registration New main inspections / safety checks or modifications to gross weight (downrating/uprating) available upon request. We are happy to assist with obtaining export/transfer license plates, as well as arranging the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors. Subject to change, prior sale, and errors! ---- Gedpfsylrp Tsx Ab Deit Who are we? Leible Commercial Vehicles is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible's particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, you'll find a wide range of vehicles. Our company philosophy is defined by fairness and integrity. Because customer satisfaction is very important to us, we offer our clients an outstanding all-inclusive service package and provide a competent contact person to support you through the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to assist you with obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 06/2026, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 89 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, 3-axle Knapen KT 01 Moving Floor 89 m³ VIN: D059900 Chassis / Attachments: * Air suspension / lifting & lowering * First axle lift axle * Haacon support legs * WABCO Smart Board * Pressure gauge * 3 x BPW axles with disc brakes * Tyres: 385/65 R22.5 * Tyre tread remaining: approx. 60-70% * Knapen PVC toolbox Body: * Moving floor system Cargo Floor * L x W x H: 13.40 m x 2.48 m x 2.70 m * Volume: approx. 89 m³ * Rolling tarpaulin * Standing platform with catwalk ladder on the left Weights: * Gross weight: 42,000 kg * Payload: 34,130 kg * Unladen weight: 7,870 kg Gsdpfx Aoylrp Hjb Dsit Miscellaneous: * German registration * Main inspection (HU) / New safety inspection possible New main or safety inspections, as well as weight downgrades/upgrades, are available upon request. We are also happy to assist you with obtaining export/transfer licence plates, and can arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors, changes, prior sale, and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the distribution of new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Because customer satisfaction is extremely important to us, we provide our clients with an excellent all-round service package, and assign a knowledgeable contact person to support them throughout the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist with loading your purchased vehicles. Organising special transports We are pleased to help you arrange for special transport if required. Transit/external registration plates We are happy to assist with obtaining export or temporary registration plates. Handling customs formalities We are also pleased to assist you with customs matters.

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle - Air suspension - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile - Rear wall made of aluminum hollow profiles, double-winged door Gjdpfew Tpr Uex Ab Dsit - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey - Rolling tarp similar to RAL 3002 carmine red

Condition: used, maximum load weight: 28,230 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,440 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 89 m³, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, 3-Axle Knapen KT 01 Moving Floor Trailer 89m³ VIN: 7028454 Chassis / Attachments: * Air suspension / lifting + lowering function * Lift axle: 1st axle * Haacon landing legs * WABCO Smart Board * Pressure gauge * 3 x BPW axles with disc brakes * Tyres: 385/65 R.22.5 * Remaining tyre tread: 1=60/70% 2=30/60% 3=50% * PVC tool box by Knapen Body: * Moving floor system: Cargo Floor * L x W x H: 13.44 m x 2.48 m x 2.68 m * Capacity: approx. 89 m³ * Sliding tarpaulin (roll tarp) * Standing platform with walkway and ladder on the left side Weights: * Gross weight: 36,000 kg * Payload: 28,230 kg * Unladen weight: 7,770 kg Miscellaneous: * German registration New technical inspections / safety checks or load capacity increases/reductions are available upon request. We are happy to assist with the procurement of export/transit license plates, and can also organize the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to prior sale, changes, and errors! ---- About us Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 m² premises, you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, which is why we offer our customers an excellent all-round service package and provide them with a competent point of contact to assist them in buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Godpsyk N N Isfx Ab Djit Organizing special transports We are happy to assist in organizing special transports. Temporary/export license plates We are happy to assist in obtaining export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 28,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 05/2026, loading space length: 13,500 mm, loading space width: 24,600 mm, loading space height: 3,000 mm, loading space volume: 96 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS, H&W, HWDKSS38, Walkingfloor trailer, standard fifth wheel height, 96 m³ Body interior / exterior: * Moving floor, Cargo Floor * Access platform * Sliding tarpaulin * Partition wall * Tapered body (2,700 mm front, 3,000 mm rear) * LASI Code XL Chassis / other equipment: * SAF Intradisc axles * Disc brakes * Air suspension * ABS, EBS * Raise/lower function * Tyres 435/50 R 19.5 * Remaining tread 5 – 12 mm Giodpfsykxn Hex Ab Dst ---- Non-binding offer from location Bocholt; subject to prior sale and errors. Sale only to businesses or export.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels Gsdpfx Aogcw Rmob Doit 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Gisdpfx Absyh S Aij Det Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Godjfi Nmwepfx Ab Dsit Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060, 92 m³ * BPW axles * First axle configured as a lift axle * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * 385/65 R22.5 tires * Gear support winches with push compensation * Plastic toolbox * 10 mm floor, 21 planks * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary headlights * Round bows * Manual rolling tarpaulin * 3-position tarpaulin supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reverse warning system * 6 additional reversing lights: at the landing gears, behind the last axle, and on the lighting bracket Godsyhtn Nspfx Ab Djit * Foldable and painted A-plate on the left rear door * Tarpaulin color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The stated sale price is fixed ex works at Knapen Trailers in NL-Deurne !!!

Condition: used, maximum load weight: 28,530 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2021, next inspection (TÜV): 02/2026, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 85 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen K200 Walking Floor 85m³ * 10 mm floor, 15 floor boards, suitable for bulk materials * SAF axles with air suspension and disc brakes * Roof roll tarp Godpsyhi E Rsfx Ab Dsit * Movable partition wall * Tyres 385/65R22.5 * Plastic storage box * BPW landing legs * Broom and shovel holder * Work platform * Work lights For further information, we are happy to assist you

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2019, loading space volume: 92 m³, Year of construction: 2019, Equipment: ABS, * Stas 3-axle walking floor S300ZX * 10mm floor * Approx. 92m³ * Radio remote control * Roll-over tarpaulin * Air suspension * 2x lift axles * Disc brakes * JOST axles Giodpfx Absw H Hpre Det * EBS * ABS

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, next inspection (TÜV): 03/2026, loading space length: 13,372 mm, loading space width: 2,488 mm, loading space height: 2,700 mm, Equipment: ABS, * Walking floor * Disc brake * Lift axle * BPW axles * Sliding tarpaulin ----Internal vehicle number 11628-----Subject to errors and prior sale WhatsApp support available! Gsdpfsycbgiex Ab Dsit If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm Godpfx Abjyawkxo Dsit * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Side tarpaulin retrofit available at an additional cost! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – moving floor * First registration: - (New vehicle) * Colour: Chassis galvanized, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.64 m to 2.82 m high) * Gross weight: 36,000 kg * Unladen weight (as per registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle lift / traction assist / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond alloy wheels * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C floor with remote control and control panel at rear left * 21 floor planks, 10 mm flat * 12 pairs of recessed lashing rings in floor * Welded aluminium end caps Gijdev Emk Uopfx Ab Det * Residual emptying wall with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Swingable rear door cross member * Hydraulic connections at the front with 3 m hoses and * Additional connection beneath body without hoses * Control platform with steps at front left * Fifth wheel height: 1,150 mm * Single wheel fenders * Full-load support legs * One-piece, foldable aluminium rear light guard * Roll tarpaulin (900g/m²) with tension belts * Foldable steel hoops and longitudinal tension belts * 1x toolbox at rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring * Aluminium rear impact guard * 1x extendable ladder at rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on interior front wall * 2 x 3-function lamps on upper rear door cross member New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Notice regarding possible inaccuracies in the listing: Although this listing has been carefully prepared, errors or inaccuracies in the information may occur. No liability is accepted for errors, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any questions.