Used open semitrailers for sale (87)

Condition: used, axle configuration: 3 axles, first registration: 06/2006, Year of construction: 2006, Trailer with crane Kennis Type 16.000 2 steering axles Stone clamp Immediately available German vehicle Codsyuyniopfx Akcjgt Kennis 16.000 (Hyva) Lifting moment: 1600 kNm at max. outreach: 9.55 m, max. lifting capacity: 1.4 t Support: vh Slewing range: 400° Engine: 2-cylinder

Condition: used, axle configuration: 3 axles, first registration: 03/2008, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,960 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 2: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 3: Tyre tread left: 25%; Tyre tread right: 25% Weights Unladen weight: 7,100 kg Payload: 33,900 kg Gross vehicle weight (GVW): 41,000 kg Functional Loading platform height: 120 cm Condition Cedpfx Aeyibrpokcogt Damages: none Identification Registration number: OK-13-HY

Condition: new, maximum load weight: 29,575 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,289 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13860 mm ? Width: 2550 mm ? Loading space length (inside): 13620 mm ? Loading space width (inside): 2480 mm ? Wheelbase: 1,310 / 1,310 mm ? Fifth wheel height: 1150 mm Cgedpfx Asrbvqgskcot ? Permissible total weight: 36,000 kg ? Empty weight: 6425 kg _____ Axles ? KRONE axles with disc brakes ? Tire brand: manufacturer's selection 385/65 R22.5 ? ABS ? Wheel nuts with protective caps ? 1st axle lift axle ? Mechanical supports ? Air suspension ? Wheel chocks ? Brake system: Knorr _____ Structure / attachments ? 4x side walls per side ? LM side walls 750 mm high, foldable/removable ? 3 pairs of folding stanchions ? Corner stanchions at the rear at side wall height, as plug-in stanchions ? Corner stanchions at the rear attached to the side ? 10 pairs of stanchion pockets 81 x 81 mm in the outer frame ? 10 stanchion pockets 81 x 81 mm in the middle of the floor ? 12 plug-in stanchions, total length approx. 1,950 mm ? 4 pairs of ship fastening straps on the side EN 29367-2 ? 1 tool box _____ Floor / tarpaulin ? 30 mm thick waterproof panel floor ? Pallet box, closed, for 24 Euro pallets ? Premium visual seal ? Floor loads up to max. 7,000 kg forklift axle load _____ Lighting / electrics ? Multifunctional rear lights (full LED), Hella (Gen.2) ? Side marker lights (flashing function) ? 2 outline lights with rubber arm, LED version ? 2 LED license plate lights _____ Paint finish ? Chassis including outer frame RAL 9005 jet black ? Axles including wheel hubs RAL 9005 jet black ? Attachments black OR GALVANIZED ? Rims silver natural ? Underrun protection white POWDER COATED ? Lighting bracket white POWDER COATED ? Support winches RAL 9005 jet black ? Ship fastening straps RAL 1004 GOLD YELLOW ? Front wall RAL 7035 light gray ? Corner stanchions rear RAL 7035 light gray ? Middle stanchions RAL 7035 light gray ? Side walls ANODIZED ? Rear wall ANODIZED ? Pallet box/storage box lid white POWDER COATED

Condition: used, machine/vehicle number: 441, empty load weight: 6,850 kg, maximum load weight: 28,150 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2005, loading space length: 12,800 mm, loading space width: 2,470 mm, loading space height: 300 mm, loading space volume: 9 m³, suspension: air, tire size: 385/65 r 22,5, color: blue, Equipment: ABS, EBS Disc brake Wheelbase 1,310 mm BPW axles Errors excepted Cedpfxep Npuvo Akcogt

Condition: good (used), axle configuration: > 3 axles, first registration: 01/2003, total length: 13,670 mm, total width: 2,550 mm, wheelbase: 10,240 mm, color: other, Year of construction: 2003, Equipment: crane, Axle configuration Rear axle 1: Lift axle Rear axle 2: Lift axle Rear axle 3: Steering Rear axle 4: Steering Weights Empty weight: 8.480 kg Carrying capacity: 44.520 kg GVW: 53.000 kg Functional Crane: Hiab 130R-F2, year of manufacture 2000 Condition Technical condition: good Visual appearance: good Csdjydbxuopfx Akcsgt Identification Registration number: OH-97-DD = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: used, axle configuration: 3 axles, first registration: 03/2008, total length: 13,860 mm, total width: 2,550 mm, wheelbase: 8,960 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Unladen weight: 7,100 kg Csdpeycqn Nsfx Akcegt Payload: 33,900 kg GVW: 41,000 kg Loading platform height: 120 cm Damage: none License plate: OK-20-HY

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Cgedpfsi Ri Szox Akcot Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 1acf251a278ec5cde4067a7b1, empty load weight: 5,800 kg, maximum load weight: 22,200 kg, overall weight: 28,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 king pins Csdpfx Akskv Uvzscsgt Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1920 mm 2 wheel chocks with holder Aluminum side impact guard Steel underride guard Quarter-shell mudguards in front of and behind each axle 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Axles + suspension Drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner stanchions 25 mm aluminum hollow profile, approx. 1 350 mm high, steel corner stanchions in volume design Approval country / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Attention! These are archive pictures!

Condition: new, machine/vehicle number: c13a96854ea37997845c1bf36, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 235/75 17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2 king pins Suspension strip for feeder ramps on the rear extension across the entire width, outer edge chamfered to prevent damage. Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each, starting from the neck area 24 t. 2-speed support winch, single-side operation, with straight connecting plate 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Sheet metal as splash guard riveted to the floor at the bottom, in the neck area above the axle of the SZM and above the axle unit Half-shell mudguards with anti-spray flaps according to EG Container locking, 4 pairs of locking cut-outs embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, 4 pairs of container locking adapters, (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery) Caution! Damage to the Lohrblech floor by the cross supports possible! Cgodolf Dtmspfx Akcjt Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, incl. extendable underride guard with lighting, (then no access ladder at the rear) Covered with Lohr plate in the tramline area, steel checker plate in the middle. Attention! Ramp loading via rear only possible with rear extension in retracted position! Storage space for access ramps integrated in rear extension, can only be used if rear extension is extended 1000 mm - then excess length For transporting the ramps with the rear extension retracted - Storage space for ramps in FR on the right in front of the axles 1 pair of ramps 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, (suspension bar for ramps on rear extension) Rear sloping to approx. 500 mm Electric cable winch, 24 volt, pulling force approx. 8165 kg, mounted centrally at the front, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers Axles + suspension Drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) with central lift arm Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 additional LED work lights at the rear, switched via reversing

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Cgsdsi Ri Hvspfx Akcet Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Condition: new, machine/vehicle number: d9c951d746f03c05bc5470f89, empty load weight: 5 kg, maximum load weight: 29,045 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Vario stanchion system 4 pairs embedded in loading area, can be pushed together to 2 100 mm and extended to approx. 3 500 mm for loading. Stanchions can be locked every 100 mm on an internal width of 2 100 mm to 3 000 mm, 4 pairs of divisible stanchions 600 mm + 1 200 mm, total height 1 800 mm removable. With an internal stanchion width from approx. 2 350 mm, excess width. Vario end walls Floor prepared for inserting 3 end walls. 4 x 5 pairs of Vario stanchion pockets for insertable end walls (front and rear) and 1 x 3 pairs in the middle for transporting 2 x 5,000 mm or 2 x 6,000 mm construction steel mats. 2 Vario end walls, each consisting of 1 pair of plug-in stanchions and 1 top crossbeam approx. 2200 mm wide. Cross beams can be extended by 220 mm on both sides, with lashing hole for tensioning. 1900 mm high Vario bulkhead, can be converted to 1300 mm or 700 mm high. 4 stanchion pockets embedded in the center of the floor for 80 x 80 mm stanchions 1 pair of supports at the bottom for Vario bulkhead at the front 1 pair of lower supports for rear Vario bulkhead Slightly slanted outer frame with Load-Lock profile for lashing strap attachment 14 pairs of lashing eyes additionally embedded in the outer frame, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Extension ladder at the rear Wheel chocks with holder Aluminium side collision protection Galvanized steel underride guard Quarter-shell mudguards in front of and behind axle unit with anti-spray flaps on last axle only Impact protection at the rear 8 construction steel winches with wire rope and counter hooks, 4 x left and 4 x right with rope feed-through through the outer frame, 1 removable slip-on gearbox for construction steel winches - supplied loose (without bracket on the frame) 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 4 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Cgsdpsi Ri R Dsfx Akcst Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be to

Condition: new, machine/vehicle number: 59ade5d1599dcdee29033ac46, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 435/50 r19,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Suspension bar for aluminum ramps across the entire width Cedpsld Ihlofx Akcogt Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle with anti-spray flaps behind each axle Pair of ferry eyes, marked yellow 1 Spare wheel holder for 1 e-wheel, with wheel mounting kit 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Container lock, 4 pairs of locks embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, foremost position recessed as hinged lock 10 pairs of stake pockets embedded in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets embedded in the center of the floor, 70 x 40 mm inside dimensions 2 lashing/stanchion rails embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 rdnung: Position 2 and 4 according to Fliegl data sheet 20 stanchions, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them Storage space for aluminum ramps, ramps can be inserted from the rear 3 pairs of folding eyelets 10 tons in the outer frame (1x in front of the bulkhead and 2x in the rear area). Axles + suspension SAF disk brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage 2 ride heights, adjustable via hand knob, 1 x for semi-mounted height 980 mm 1 x for semi-mounted height 1100 mm (Note! Vehicle with inclined position) Brake system 2-line compressed air brake system Colored cable routing for easy servicing. Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting & lowering valve 2 ride heights, adjustable via hand knob, 1 x for fifth wheel height 980 mm 1 x for fifth wheel height 1100 mm (Note! Observe overall height, excess height at customer risk) Driving height in conjunction with lift axle, when the lift axle is raised, the total loading or semitrailer height increases by 50 mm (with Mega Flex only with low driving height or semitrailer height) Vehicle driving stability system Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Stee

Condition: used, maximum load weight: 29,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2014, loading space length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krone SD Mega Liner Plateu - Mega trailer Cgodpfx Akewzq Twjcot - BPW axles - Disc brakes - Storage box - TÜV and SP expired - Tyres: 445/45 R19.5 - Unladen weight: approx. 5,500 kg Errors and prior sale excepted. Internal vehicle number: 10795. WhatsApp support available! For questions about the vehicle or further information, feel free to contact us conveniently via WhatsApp.

Condition: used, machine/vehicle number: 120, empty load weight: 7,450 kg, maximum load weight: 26,050 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 08/1989, loading space length: 12,800 mm, loading space width: 2,400 mm, suspension: air, tire size: 385/65 r22,5, color: green, Equipment: ABS, Drum brake BPW axles 2nd + 3rd axle mechanically steered Cedjn Slvqjpfx Akcjgt Errors excepted

Condition: used, machine/vehicle number: 231, empty load weight: 7,200 kg, maximum load weight: 28,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2004, loading space length: 13,600 mm, loading space width: 2,460 mm, suspension: air, tire size: 385/65 r22,5, color: blue, Equipment: ABS, Disc brake EBS Wheelbase 1,310 mm BPW axles Lifting and lowering device Cedpfx Aenn Dpljkcjgt Errors excepted

Condition: good (used), functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 24,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/1991, loading space length: 13,800 mm, loading space width: 2,500 mm, suspension: air, tire size: 315.80 r 22.5, tire condition: 60 %, color: orange, Year of construction: 1991, Used Capperi extendable flatbed semi-trailer, 13.80 m length, 3 steering axles from turntable, twin and single-single wheels, steering turntables, wooden and metal sheet floor, sockets for stakes, chassis extendable by an additional 6.0 m in increments of 1.0 m each, air suspension, year 1991, in excellent condition, maximum length 20 m, inspected until 31.05.2026 – DEALERSHIP INTERDRIVE SRL, PARMA. Cgjdjx H S Hpspfx Akcot

Condition: used, maximum load weight: 27,450 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2003, loading space length: 13,940 mm, loading space width: 2,480 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 2,990 mm, Equipment: ABS, According to our “General Terms and Conditions of Sale” and excluding any guarantee or warranty, we can offer you the following vehicle subject to prior sale, errors, and omissions excepted: Renders Drop-Side Trailer ( Vehicle 875 ) First registered: 02.01.2003 Type: N04G31-S10 (Heavy-duty specification) Gross vehicle weight: 34,000 kg Curb weight: 6,550 kg Payload: 27,450 kg Overall length: 13,940 mm Overall width: 2,550 mm Overall height: 2,990 mm Tyres: 385/65R22.5 1.) approx. 20/30%, 2.) approx. 20/20%, 3.) approx. 20/20% ALCOA LM rims 1st axle: lift axle BPW drum brakes Wheel chock Plastic toolbox at the rear on the driver’s side Side underrun protection left and right 4 x socket for wide load sign, one each at the front and rear on each side Cgsdexquraspfx Akcot Drop sides approx. 800 mm foldable, tailgate 800 mm foldable 13 pairs of lashing rings in outer frame Wooden floor, clean and tidy Air suspension with raise & lower function Price: €4,250.00 (net) All details without any guarantee or warranty. Our “General Terms and Conditions of Sale” apply. Jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court Ludwigslust; for higher dispute values, it is the Regional Court Schwerin. Errors, omissions, and prior sale excepted.

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed trailer with Kennis type 16.000 roll crane and hydraulic outriggers — Manufacturer: Schwarzmüller — Model: Flatbed trailer with Kennis roll crane type 16.000 with hydraulic outriggers — First Registration: 02/2009 — Gross vehicle weight: 39,000 kg — Unladen weight (as per registration): 7,950 kg — Payload: 31,050 kg — Axles: 3 x Mercedes, 1st axle is a lift axle / 3rd axle is steered — Suspension: Air suspension with lifting/lowering function — Tyres: 385/65 R 22.5 approx. 50% tread remaining — Internal flatbed dimensions: approx. 13.50 m long x 2.48 m wide x 1.00 m high — Colour: Chassis black, side walls yellow — EBS (Electronic Braking System) — Roll crane: Kennis type R-16/7.10, year 2009, with hydraulic outriggers — 3 hydraulic extensions — Max. outreach at 7.10m: 2,100 kg — Lifting capacity at 3.50m: 4,500 kg — 5th and 6th control circuit — Elevated seat with joystick controls — Hatz diesel engine with silent pack — Container locks for 20 ft or 40 ft containers — 5-piece aluminium side walls Cgedpogt Si Tefx Akcst — Rear swing doors — Access ladder at rear left — Removable stanchions — Lashing rails on both sides for securing cargo — Wooden/steel floor — 2 toolboxes on left side — 1 toolbox on right side — Single mudguards — Full-load support legs — Reversing lights — Spare wheel bracket — Pallet forks available at extra cost

Condition: used, overall weight: 31,300 kg, axle configuration: 2 axles, first registration: 07/1989, loading space length: 13,600 mm, loading space width: 2,370 mm, loading space height: 600 mm, Axle version BPW Luft 2x10 to, 2nd axle steered 5 x cable pulleys Tires 425 / 65 R22.5 Tread depth 6/10 9/14 Cjdpfed U Rnajx Akcogt

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2016, total width: 2,550 mm, total height: 3,277 mm, Equipment: ABS, Krone steel mat trailer with side walls Cgedpfev U Hwgjx Akcst * Krone axles * Air suspension * Disc brakes * Liftable 1st axle * 1 pallet box * 1 plastic storage box * Side walls * Plug-in stanchions * Cable winch * Lashing rings * Spare wheel carrier * Lashing rings * Mechanical Jost landing gear * Tires 385/65 R22.5 We are happy to provide you with further information.

Condition: used, machine/vehicle number: 261, empty load weight: 6,040 kg, maximum load weight: 27,960 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/1994, loading space length: 12,800 mm, loading space width: 2,480 mm, loading space height: 400 mm, loading space volume: 13 m³, suspension: air, tire size: 385/65 r22,5, color: silver, Equipment: ABS, Drum brake Wheelbase 1,310 mm BPW axles Csdpfx Akjp T T Nuocogt Errors excepted

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable Cgsdperi Hihofx Akcet with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 2,638 mm, suspension: air, tire size: 235/75 R17,5, color: other, Year of construction: 2025, Chassis Saddle (Spedition configuration) Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin. Drivable and loadable with construction/agricultural machinery up to a maximum gross weight of 24,000 kg and for construction machine widths up to 2,480 mm (however, the track width of the machinery or vehicles to be transported must not exceed 2,200 mm). Rear-mounted hook-on bracket for aluminium ramps (wider construction/agricultural machinery may not be loaded). Outer frame, slightly angled, new version featuring "Load-Lock profile" for attaching tie-down straps. 14 pairs of recessed lashing rings in the outer frame, each rated to 2.5 t. 6 pairs of recessed lashing rings in the outer frame, each rated to 5 t. 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensation for push. Free landing gear corner dimension or free rear swing radius: approx. 1,920 mm. Foldable rear support. 2 wheel chocks with holders. Aluminium side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind each axle. With anti-spray mud flaps behind each axle. 1 spare wheel holder for 1 spare wheel including mounting set. 1 spare wheel, identical brand to primary tires, steel rim. Axles & suspension: SAF drum brake axles. "Axles/chassis laser measured" to reduce tyre wear and fuel consumption. Air suspension. 1st axle with automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, no truck installation required (starting aid operates up to 30% axle overload and max. speed of 25 km/h). Brake system: 2-line compressed-air braking system. Color-coded wiring for easier maintenance. Spring-actuated parking brake. 2 non-interchangeable coupling heads at front (without connecting lines). 24 Volt EBS (Electronic Braking System) with EBS socket at front, no connection cable. Note: The trailer may only be towed by towing vehicles that guarantee the functionality of the ABS! Including lifting & lowering valve. Vehicle driving stability system. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display through the towing vehicle via EBS, without truck installation (requirement must be present in the truck; only on standard tires). Wheels and tires: Cgsdpfx Akexb D Swocst 12x 235/75 R17.5 twin tires. 12x steel rims, factory silver. Electrics: 24 Volt, multi-chamber lights, yellow LED side lighting. Yellow LED side lighting linked to indicator—flashing side marker lights. 2 white LED position lights at the front. 2 white/red lane marker lights at the rear. 2 x 7-pin non-interchangeable sockets at the front, without connection cable. Floor: Phenolic resin-coated plywood panels, approx. 30 mm thick, designed for high point load, suitable for forklift axle loads up to max. 5,600 kg. Front bulkhead / corner stanchions: 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions in high-volume steel version. Bulkhead additionally fitted with 1,250 mm high phenolic resin-coated plywood panel on the inside.

Condition: good (used), functionality: fully functional, empty load weight: 5,800 kg, maximum load weight: 31,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 07/1999, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 1999, Equipment: ABS, sem acerbi, open platform with 3 axles with 1st soill + 3rd steering, air suspension, abs, side uprights in round tubular, double speed feet, tool box, wood holder, side winches for fastening with straps, 60cm front head, platform in wooden strips, year 1999, inspected until 07.31.2025 - INTERDRIVE SRL DEALER - PARMA Csdpfx Akswl Annocjgt

Condition: used, empty load weight: 6,640 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2007, loading space length: 13,600 mm, loading space width: 2,550 mm, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: yellow, Equipment: ABS, EBS Disc brake Payload 29,360 kg Air suspension with lift function BPW axles Alcoa aluminium rims Lifting and lowering device Cgodpfjxnz Ehex Akcjt Subject to errors and omissions