Used special purpose machines for sale (135)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 9 kg, power: 1,200 kW (1,631.54 HP), smoke pipe connection diameter: 800 mm, nominal heat output: 1,200 kW (1,631.54 HP), space requirement length: 2,500 mm, space requirement height: 22,000 mm, space requirement width: 2,500 mm, Chimney/flue of a former 1200 kW biomass boiler available for sale. Stainless steel pipes are installed. 1 passage DN800 1 passage DN400 complete with an external walkway as shown in the pictures. Height: 22 m Bodpezmny Nefx Acnodg Assistance will be provided during dismantling. Available immediately.

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Bdedpfjw Hxgvox Acnsg Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Year of construction: 1989, condition: used, functionality: fully functional, machine/vehicle number: BDT019/1720, TRÜTZSCHLER Blendomat - Type BDT019/1720 - Year of manufacture: 1989 - Dimensions: length 10 m, width 3 (2) m, height 3 m - incl. control unit - Cutting length: 60 mm - Additional roller set for cutting length 38 mm Machine is still operational and installed; inspection on-site possible. Buyer is responsible for dismantling and collection. Bjdpswtlzgefx Acnodg Collection in 14712 Premnitz Subject to prior sale Enquiries by email only, please.

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Last intended use (Jan. 2024): - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex - Collection in can - Accessories/spare parts partially available The machine has been dismantled and stored, but can be inspected on site. Bdjdpfsw Rlnasx Acnog Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Enquiries in writing only, please.

Condition: not inspected (used), Year of construction: 1992, Short description: Bedpew Rkiiofx Acnedg - 3 over 3 drafting system - with pressure bar - automatic can change - Machine documentation available Last intended use (Jan. 2024): - Product application testing - Used as a base for spinning on OE machine (approx. 45kg/sample) - Untested, for spare parts only! Machine is dismantled and stored, can be inspected on site. Collection in 14727 Premnitz by buyer only, no shipping. If interested, we look forward to receiving your offer. Inquiries in writing only.

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes Bodpew Rldzjfx Acnjdg - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 52353, Short description: - Working width: 960 mm - Infeed: roll feeding - Opener not included - Discharge into can - Machine documentation available Last use (Jan. 2024): - Application-oriented product testing to assess the carding behavior of polyester fibers (approx. 6 kg/sample) Bdedpjw Rkgbofx Acnog - Not a production machine - White types - Untested, for spare parts only! Machine is dismantled and stored, but can be inspected on site. Pickup only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Inquiries in writing only, please.

Year of construction: 1983, condition: not inspected (used), machine/vehicle number: 50960, Short description: - Working width: 960 mm - Infeed: feed roller - Opener not included Bjdpfx Ajw Rkdyocnjdg - Outfeed: carding belt - Can deposit - Machine documentation available Last use (Jan. 2024): - Application-specific product testing for evaluating the carding behavior of polyester fibers (approx. 6kg/sample) - Not a production machine - 0.9-3.3 dtex; 32-60 mm (always with constant settings) - Black and spun-dyed types - Untested, sold only for spare parts! The machine is dismantled and stored, but can be inspected on site. Collection only by the buyer in 14727 Premnitz, no shipping. If interested, we look forward to receiving your offer. Enquiries in writing only, please.

Condition: used, Tepla Tepla 400 SC 230 Volt, 13A, 50/60Hz Pressure: 4-6 bar Scope of delivery: (See images) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax. Bdodpfx Acezh Drqjnsg

Condition: used, Descaling pump, universal suction, pressure and circulation pump -Device: for problem-free descaling -of smaller water systems such as heating coils, gas flow and Circulating heaters, water boilers, etc. -Drive: 220 volts -Max. Delivery rate: 6 l/min -Max. Delivery head: 40 m Bjdpfx Aocuauzecnjdg -Dimensions: 420/420/H410 mm -Weight: 9 kg

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 218224, Abrasion testing machine from ABREX. Bdodezlz Rrspfx Acnjg The machine is new and was purchased a few years ago. Operating hours: 0 hours, as we no longer have any use for this machine. Delivery conditions: Self-collection in Königsbach-Stein.

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency Bjdpfx Aewwkrfecnjdg - Plug-and-play

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Bodpfx Acszkqm Honsdg

Year of construction: 2017, condition: new, functionality: fully functional, ----- Bdodpfxjyly R Es Acnjg

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Bdedpfozd Ukpsx Acnog Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All required climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Bdedpfxszd Ukio Acnog Dew point mirror (optional) Vibration-damped granite for vibration-free installation of an ultra-microbalance Ionization device against static charge Flow protection to shield the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, grounding bolts Advantages: Complies with regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45% RH ± 3% Dimensions W/D/H 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, from a well-known manufacturing plant in Bulgaria. Bdsdszd Rygspfx Acneg

Condition: excellent (used), IPG Ytterbium Fiber Laser Here we offer you an IPG Ytterbium fiber laser. IPG Ytterbium Fiber Laser Bdsdpfx Acjzd Rmaonog 90-240 VAC Type/Model Name: YLP-HP-2-1500-50-100 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Bdodpfxeziwplj Acnsg Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M8298, Bandsaw, blade saw for soft materials. Bsdpfozivv Djx Acnsdg The machine has an overhang of 1260 mm. Cutting length: approximately 2300 mm. Cutting height: approximately 900 mm.

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 04.04.40, Technical characteristics: # Payload Capacity: Free conveyor, 350 mm width / 250 mm height # Tank capacity: 1 tank, 250 L # Washing chamber capacity: spraying nozzles in all directions in 3 consecutive steps # Conveyor speed: approx. 0.4 m/min # Eco-friendly operation: Solvent-free, uses water-based detergents. # Average load weight approx. 25 kg; maximum 50 kg # Mechanical weight: 4500 Kg Electrical Equipment # Operating voltage: 400Vx3 # Connected power: 60 kW / rated current 65A Dimensions # Machine dimensions (L×W×H): 5000 × 2000 × 1700 mm Equipment consists of: # Main machine, manual loading/unloading (Loading height approx. 930 mm) Bodpfsxx N Sdjx Acnsdg Machine status: WORKING

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Bjdpfxowhdnhj Acnedg Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request. Bdedpfx Acjzfwfxjneg

Condition: used, Year of construction: 2024, operating hours: 4 h, functionality: fully functional, machine/vehicle number: B24AA452D3, LixelKity K1 with RTK Module – Demo Unit, Like New Condition Bodozfgimspfx Acnsdg For sale is a LixelKity K1 mobile mapping scanner, including an RTK module, offered as a demo unit in very good, like-new condition. The LixelKity K1 is a modern, high-precision 3D scanning system for the quick and efficient capture of buildings, construction sites, infrastructure projects, and terrain data. By combining LiDAR technology, high-resolution cameras, and RTK support, the system enables precise and georeferenced data acquisition in real time. Features: LixelKity K1 3D LiDAR scanner RTK module for centimeter-accurate positioning Integrated cameras for colored point clouds Mobile mapping system for indoor and outdoor use Compact and user-friendly design Original accessories included Application areas: Surveying and geodesy Construction and BIM projects As-built documentation Architecture and monument preservation Infrastructure and asset management Digital twins and 3D modeling Condition: Demo unit Technically flawless Optically in very good condition Ready for immediate use Inspection and demonstration are possible by appointment. We will gladly send further information, technical data, and images upon request.

Year of construction: 2024, condition: excellent (used), The ZLC series cold chamber die casting machines have been developed based on over 12 years of experience and are widely used for producing zinc or brass alloy components in sectors such as automotive, electrical engineering, electronics, toys, household appliances, and computers. These cold chamber die casting machines are equipped with high-quality imported hydraulic components, a robust machine frame, tie bars made from high-tensile alloy steel, and industry-specific control systems. Key advantages include advanced design, precision manufacturing, rapid response, easy operation, reliability, safety, and low energy consumption. The machine comprises a control system, hydraulic system, lubrication system, cooling system, clamping system, injection system, machine frame, safety door, and more. Its primary function is to extract a precise quantity of molten metal from a separate furnace, pour it into the injection sleeve, and, under high pressure, inject the completely molten alloy into a mold mounted on the platen. The die closes and the high pressure is maintained until the alloy fully solidifies inside the mold. Bjdey A Hnyspfx Acnsdg