Incandescent stove

ElectroHeat Sweden AB Vagnugn 3978SH

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de Psdpfxefnh Tgj Ah Hjpl

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Pjdjiy Dtbspfx Ah Hopl Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A - incl. 1 wire shelf insert - Weight 550 kg - Documentation Pedpsiq Uv Nefx Ah Hopl Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Year of construction: 2010, condition: excellent (used), Chamber inside 2000 x 1250 x 1250 mm Volume inside 2344 Liter Up to 400 Gr/C (Power 33kW) Pedeuqkwfepfx Ah Hepl   Preheating / Drying For manual, cycle and CNC processing up to interactive contour programmingCovered guidance tracks (DGP) for high long-term precisionDirect drive from motor to main spindle for high running smoothnessOil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearingCombination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area Length:2500mm Width:2015mm Height:2900mm Weight:4000kg

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, Pedpfx Ahjncd Aze Hjpl dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm Ppsdpfjwzynqjx Ah Hsl z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional Pedpfx Ahjvllxdj Hspl

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), ♻ The MONSTER is a hybrid machine with two shaft PRE-SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets. ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder combined with pre-shredder, capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder with pre-shredder: ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) Psdpfx Ahjtpwrms Hopl ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets ✔ Filling opening: 2072 x 1070 mm ✔ Weight: 4200 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: ready for operation (used), functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 Ppedsr Ak Rgopfx Ah Hel - after technical inspection - very good condition - for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition power of feeder motor 1,5 kW length of feeder 4200 mm transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Ppodpfx Aheg Rxhgj Hel