Sell machines Sell
Watch list (0) Login
Menu
  2. Special purpose machines
  3. Listing ID: A22114103
Home Page Special purpose machines Listing ID: A22114103

EV Car Rotor Assembly Line (2021)

Year of construction
2021
Condition
Used
Location
Czechowice-Dziedzice Poland
EV Car Rotor Assembly Line (2021)
EV Car Rotor Assembly Line (2021)
EV Car Rotor Assembly Line (2021)

Machine data

Machine type:
EV Car Rotor Assembly Line (2021)
Year of construction:
2021
Condition:
used

Price & Location

Auction start:
24.07.2026 at 11:45 o'clock
Auction end:
30.11.2026 at 11:00 o'clock
Location:
Czechowice-Dziedzice, Poland Poland
Call

Details about the offer

Listing ID:
A22114103
Update:
24.07.2026

Description

EV Car Rotor Assembly Line (2021)
Designed to produce rotors in the height range 300–460 mm
Including manual, semi‑automated, and automated operations
Cycle time: 86 s
Manufacturer: TeamTechnic (Nextomation)

Csdpfx Aezc N H Dji Neha
Stations and Equipment

Rotor package and shaft loading, shrinking, and cooling
KUKA KR120 R3900‑2K/FLR robot (2021) with camera system
3x semi‑automated material infeed for rotors (high and low versions)
3x semi‑automated material infeed for metal sheet packages
Automated sheet‑metal package heating and shaft insertion
Rotary table with 6 heating stations, up to 300 °C

Rotor pressing, locking, and laser marking
Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm)
Laser marking with Arex 420 laser

Resin application and large magnet assembly
Manual magnet belt feeding on trays
Automated large magnet insertion and sealing
Scheugenpflug LiquiPrep LP 804 resin dispensing unit

Resin application and small magnet assembly
Manual magnet belt feeding on trays
Automated small magnet insertion and sealing
Scheugenpflug LiquiPrep LP 804 resin dispensing unit

Resin gelling and curing
Automated operation for 150 pcs at 200 °C

WPC tooling preparation station
Press plate cleaning station

Package unlocking, resin level, and magnet position control
Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm)
Resin level and magnet position control

Balancing
Automated balancing with pin insertion and verification
KUKA KR120 R3100‑2/FLR robot (2021)
2x Schenk eTeno balancing machines (2021)
2x 1.5 T Kistler presses

Spinning
Automated aging and working‑condition simulation up to 120 °C
KUKA KR120 R3100‑2/FLR robot (2021)
3x Hoffmann ESV25‑AR2 spinning stations (2022)
4x cooling tracks

Final balancing
Automated balancing with pin insertion and verification
KUKA KR120 R3100‑2/FLR robot (2021)
2x Schenk eTeno balancing machines (2021)
2x 1.5 T Kistler presses

Seller

Registered since: 2020

44 listings online

Trustseal icon

Telephone & Fax

+44 20 38... show
These listings may also fit your interest.
Auction
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Deephole boring machine BUCK TBFZ 1600 CNC
Ends in 
d  h  min  s  Auction ended
Germany Hessen
18,556 km
Deephole boring machine
BUCKTBFZ 1600 CNC
buyer-protection
€18,000
To the auction
Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Chsdpsznkpvofx Ai Nja Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm
See details
Auction
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Vertical machining center AXA VSC-3-3000-M
Ends in 
d  h  min  s  Auction ended
Germany Nordrhein-Westfalen
18,458 km
Vertical machining center
AXAVSC-3-3000-M
buyer-protection
€5,000
To the auction
Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 Csdpfx Aiezncnqs Neha EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible
See details
Auction
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Horizontal machining center HELLER MCH 250
Ends in 
d  h  min  s  Auction ended
Germany Nordrhein-Westfalen
18,458 km
Horizontal machining center
HELLERMCH 250
buyer-protection
€15,000
To the auction
Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Cjdpjzncnksfx Ai Noha Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D
See details
Auction
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
5-axis horizontal machining center HELLER MCH 280 C
Ends in 
d  h  min  s  Auction ended
Germany Nordrhein-Westfalen
18,458 km
5-axis horizontal machining center
HELLERMCH 280 C
buyer-protection
€59,000
To the auction
Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Chodpfxozncnds Ai Nea Control system: Siemens 840D
See details
Auction
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Laser cutting machine Prima Power CV 5000
Ends in 
d  h  min  s  Auction ended
Germany Hessen
18,556 km
Laser cutting machine
Prima PowerCV 5000
buyer-protection
€7,500
To the auction
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Csdpszncm Hefx Ai Njha Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h
See details
Auction
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Injection molding machine ENGEL ES 2050/400 HL
Ends in 
d  h  min  s  Auction ended
Germany Hessen
18,515 km
Injection molding machine
ENGELES 2050/400 HL
buyer-protection
€5,000
To the auction
Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Chodpfszncmtex Ai Nsa Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg
See details
Auction
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Injection molding machine ENGEL DUO 3550/650
Ends in 
d  h  min  s  Auction ended
Germany Hessen
18,515 km
Injection molding machine
ENGELDUO 3550/650
buyer-protection
€29,500
To the auction
Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Cjdpfozncmaox Ai Nsha Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg
See details
Auction
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Horizontal pressure beam saw HOLZ-HER Cut 6120
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
18,628 km
Horizontal pressure beam saw
HOLZ-HERCut 6120
buyer-protection
€15,000
To the auction
Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Chodpfx Aeznbkkei Nea Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device
See details
Auction
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Machining center Weeke Optimat BHC 750 Swiss Profiline
Ends in 
d  h  min  s  Auction ended
Poland Województwo wielkopolskie
17,989 km
Machining center
WeekeOptimat BHC 750 Swiss Profiline
buyer-protection
€5,590
To the auction
Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cjdpfx Ajznbgrei Neha Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.
See details
Auction
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Turning automatic lathe Citizen C32-VIII
Ends in 
d  h  min  s  Auction ended
Germany Baden-Württemberg
18,717 km
Turning automatic lathe
CitizenC32-VIII
buyer-protection
€15,000
To the auction
Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chodpfx Aiozlqdzo Nea Chip conveyor Parts conveyor belt
See details
Preview Trust Seal

Machineseeker Trust Seal

What is the trust seal?

Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.

  • What do we verify?

    Trade licence>

    Check of
    trade licence or commercial register extract

    Postal address>

    Verification of the dealer's
    postal address

    Bank details>

    Validation of the
    banking details

    Availability>

    Verification of
    accessibility     to
    main phone number

    Credit report>

    Credit report
    may not contain negative criteria

    Customer complaints>

    Buyer complaints
    can lead to withdrawal of the seal

  • What does this mean for you as buyer?

    The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.

    Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.