Used Special purpose machines for sale (122)

Year of construction: 2005, condition: new, I want Rotating stainless steel Ljdpfx Aboqaknae Uoah

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Lasdpfx Abewhdnhe Uoh Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Year of construction: 2022, condition: new, Container access ramp, Fixed Model, this access ramp is equipped with lateral and central sleeves allowing the driver to transport the boom and to position it easily. The unloading of the container can therefore be done as quickly as possible. Brand: AZ RAMP - Type: HCNN-08 Nominal Capacity: 8 000 Kg Dimensions: 1 500 x 2,000 mm Clean weight: 295 Kg 2 Stowage Chains Grey color Ledpfeim I Hqsx Ab Uoah Set up in 10 seconds. #rampe_de_chargement; #Container_ramp; #rampe_depotage_container

Year of construction: 2013, condition: excellent (used), functionality: fully functional, total length: 3,975 mm, total width: 3,140 mm, drive type: Diesel, load capacity: 320,000 kg, stroke length: 400 mm, machine/vehicle number: z.B.:TG-BS-90.0/C250/5/3921-720/287/A6VE 160, A total of eight high-quality NBR C250 crawlers are available. These crawlers, with low operating hours, are ideal for use in demanding environments and offer excellent performance and reliability. Product details: • Type: NBR C250 • Quantity: 8 units available in total • Condition: used / top condition / fully functional • Availability: immediately available • Engine hours: 171.65h Laedpovn Rfbsfx Ab Ujh • Driven: 52.61h Dimensions: Length: 3,975mm Width: 3,140mm Overall height: 1,450mm Height of chassis: 1,281mm Dimensions of track plates (LxW): 320 x 600mm Maximum stroke, load cylinder: 400mm Maximum load of main cylinder: 320t Weight ready to drive: 26t Top speed: 0.53km/h Grade capability: 7° Drive system: Self-contained hydraulic drive. Each crawler has its own processing unit with diagnostic display and real-time computer for all functions. Diesel engine, 240 kW, exhaust standard BIII/4 Encapsulated PPU, 80-85 dB On the manufacturer's website (nbr-offshorelogistics), you will find further details on the crawler descriptions, as well as some videos of the crawlers in operation. All information is provided without guarantee, subject to prior sale. The goods are sold without any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to damages resulting from injury to life, limb, or health. If you are interested or would like further information, please contact us.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Lasdonk Uabspfx Ab Ueh

Year of construction: 2015, condition: excellent (used), continuous holographic ribbon hot stamping equipment applies 2 strips on request can be expanded to 4 configuration on request: reel-to-reel Lsdpfx Abeuzkutj Ujah or by bundle for modules

Year of construction: 2011, operating hours: 2,369 h, condition: excellent (used), functionality: fully functional, operating pressure: 2,400 bar, pump pressure: 2,400 bar, water pressure: 2,400 bar, machine/vehicle number: G55600085, Fully refurbished machine in 2020, only 257hours since, bought for project and never used after. Unit is in like new condition. Ledsv S Duwspfx Ab Ueah

Year of construction: 2020, condition: new, Height-adjustable turning device under load for the machining or assembly of turbine rotors, rollers or shafts. Load capacity: 20.000kg Lsdpsfw Afkefx Ab Ueah stroke: 400mm Roller diameter: 350mm Applicable component diameter: D180mm - D900mm Track roller material: TEXMAT-500

Condition: new, functionality: fully functional, spindle speed (min.): 550 rpm, spindle speed (max.): 6,000 rpm, Compact, space-saving design. All units can be mounted in any position between horizontal and vertical spindle nose orientation. Infinitely adjustable pneumatic feeds with precise oil damping allow optimal cutting conditions for each tool. Depth stops with micrometer screws adjustable within 0.01 mm. The working spindle is relieved from belt tension due to indirect drive. Robust, universally adjustable block construction based on a modular system. The drilling units are available with or without chip evacuation. Chip evacuation is electronically controlled. Spindle lubrication with oil mist ensures continuous, uniform, and adjustable lubricant supply as needed. Lasdevyitbepfx Ab Ueh Overpressure in the spindles prevents the ingress of contaminants. Electrical interlocking and monitoring of all movements: tool breakage due to incorrect switching or operation is therefore eliminated. Electropneumatic control system

Year of construction: 2002, condition: excellent (used), Single-disk surface lapping machine Disk diameter 1,800 mm Weight approx. 6,500 kg Dimensions (LxWxH) 3,415x2400x2730mm Refurbished in 2020 Working disc diameter 1,800 mm Dressing ring inner diameter 690 mm 3 work stations Pneumatic lift device for 3 work stations Speed of the working disc 1-50 rpm Working power 7.5 kW Connection 400V/50Hz Maximum workpiece size Ø 680 mm Full-fledged lapping machine, is equipped with a conventional control system, continuously adjustable drive, separate control cabinet, lapping agent system with pump unit; lapping agent container 50L, and used lapping agent tank. Radial grooved lapping disc, gray cast iron, 3 grooved dressing rings, gray cast iron, 3 pressure plates, gray cast iron Machine is ready for use immediately. Condition: very good, can be demonstrated under power Delivery: EXW as seen Laodoggl Hbspfx Ab Ush Payment: net - after receipt of invoice

Condition: good (used), Year of construction: 1978, Machine overhauled and ready for use including accessories Lajdpfxehzt Nps Ab Ueh

Condition: new, - Custom machines for the mass production of solar mounting parts - Cutting - Drilling - Milling - Tapping Laodpfx Ajmft Dqob Ueh - Modular construction: can be adapted to your specific requirements

Condition: good (used), Urban Corner Cleaner type SV 815/4 Ledpfelx Ar Asx Ab Uoah

Condition: excellent (used), Year of construction: 2001, operating hours: 32,000 h, functionality: fully functional, machine/vehicle number: 01-123-01, HF Stretch Ceiling welder A linear welder with a power of 10kW, designed for the production of medium and large-sized PVC products (PVC Stretch ceilings). Machine specifications: - TD-Ceiling travelling HF-welding machine Air-cooled electrode holder 1000 mm - Welding table 12m, level 2 precision track system for straight machine transportation Phosphor bronze band 125 mm wide, stretched across welding table, for eliminating table joints and/or welding surface of glossy material - Double joystick for variable positioning of machine Lodpfx Aorwyf Asb Uoah - 1 cutting edge welding electrodes 1000mm x 3 mm, cutting edge 0,2 mm, with 1 loose tool holder Machine characteris

Year of construction: 2018, condition: good (used), We sell a Klepp gas filter unit according to ATEX "e" II 3 G. The solution for permanent, optimal extraction and filtering of gaseous pollutants. Ljdpfsm Ak Rmsx Ab Uoah

Year of construction: 2015, condition: used, - Weight approx. 1600 kg - Dimensions (LxWxH) 1,820x1,820x2550 mm - Tool diameter 914 mm - Working disk diameter 36 inches - 4 stations with 304 mm inner diameter each - PLC control Siemens S7 - Separate control cabinet - Tool cooling - Protective cover over linear guides Lajdpfx Abovu Agdj Ueh - Station forced drives for conditioning rings - KSS circulation system - 7.5 KW spindle operation - Machine table diameter 1,800 mm - Control cabinet 800x550x2,200 - CE conformity available - Bosch safety concept - Use until decommissioning for honing flat surfaces for injection systems - Machine is ready for operation - Machine is in good condition, constant preventive maintenance - 2 CBN tools (new price of a tool approx. 30,000.00 €)

Year of construction: 1999, condition: good (used), functionality: fully functional, End milling machine for portal construction ready for use Lsdpfjhzt Nhex Ab Uoah

Condition: new, Glass cleaning machines have been used for years in restaurants, beer cellars or at the largest folk festivals in the world for cleaning glasses and jugs. Glass cleaning machines are mainly used in the catering industry to facilitate counter operation and provide significant improvements in hygiene. So far, they have been tested and successfully used under the most demanding conditions. Ledpfx Aboh Tfnfo Uoah The output volume, depending on the type of system, is between 800 and 2,500 pieces per hour. The jars or pitchers are placed on the conveyor belt or in baskets with the opening facing downwards and cleaned in a continuous cycle at an adjustable washing temperature and with detergent. To prevent contamination of the caustic tank, the dripping liquid is fed directly into the channel in the feed zone. In the cleaning tunnel, the glasses are rinsed with detergent and clear water and can be removed hygienically clean at the outlet. Get your non-binding offer now.

Condition: excellent (used), Extractor for "PERTICI" sawing center type Scarabeo Lodpfevc Agmex Ab Ujah

Condition: like new (used), Year of construction: 2011, operating hours: 710 h, functionality: fully functional, machine/vehicle number: 10-144-01, HF Stretch Ceiling welder A linear welder with a power of 10kW, designed for the production of medium and large-sized PVC products (PVC Stretch ceilings). Machine specifications: - TD-Ceiling travelling HF-welding machine Air-cooled electrode holder 1000 mm - Welding table 12m, level 2 precision track system for straight machine transportation Phosphor bronze band 125 mm wide, stretched across welding table, for eliminating table joints and/or welding surface of glossy material - Double joystick for variable positioning of machine Ljdpforwydtsx Ab Ujah - 1 cutting edge welding electrodes 1000mm x 3 mm, cutting edge 0,2 mm, with 1 loose tool holder Machine characteris

Year of construction: 1990, condition: repair required (used), The machine of this series is used for the automatic waste-free production of rolls, cores and other cylindrical rolled articles. Only strip material is processed. Starting material: strip thickness from 0.7 to 1.5 mm from 3 to 23 mm width / 2 mm to 23 mm width. The machine operates automatically / loading is independent. Required machine area approx. 1500 x 1000 mm Switch cabinet approx. 800 x 350 mm Lasdpfxofnqbwo Ab Ush Machine weight approx. 800 kg Switch cabinet approx. 60 kg Output machine max 300 pieces/min. Automatic material reel included.

Year of construction: 2002, condition: not inspected (used), Two-disc fine grinding machine hydraulically operated wheel diameter, outside Ø 1010mm, inside Ø 310mm hobbing device, type 28/5 optional 6 Lsdpfjg E I Npex Ab Ujah rotor disc, type T28, number 5, optional 6bar Hydraulics 6 bar Electric, 400V, 50 Hz, 230V Measuring control, +/- 2µm accuracy drive, upper working disc 15KW, 2- 400 rpm lower working disc 15KW, 2- 400 rpm, inner pin ring 5KW, 2-100 rpm Weight approx. 4000 kg dimensions (LxWxH) ca.4560x3830x2900mm Machine can be inspected Delivery : EXW as viewed payment : net after receipt of invoice