Used reactors, boilers & containers for sale (168)

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Nkodpfxsx Ryuij Ad Nst Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, Used BCD approximately 1,000 litre capacity super duplex 2507 stainless steel vertical reactor. Unit measures approximately 1,450mm tan to tan x 920mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at -10 to 180 deg.c. External 316L stainless steel jacket rated 10 bar / full vacuum design pressure at -10 to 180 deg.c. Unit has bottom entry stirrer with mag drive. Unit mounted on (3) stainless steel legs. Specifications: Capacity: 264.2 gal Type of stainless: super duplex 2507 Internal Pressure: 3 PSI Internal Temperature: 180°F Jacket Pressure: 145 PSI Nedpfsx Ryt Esx Ad Nekt Diameter: 36.22" Straight Side: 57.087" Type Of Heads: welded dished top and bottom Legs/Lugs: 3 Dimensions: 57.0866 in x 36.2205 in

Condition: good (used), Used electrically heated pressure vessel with agitator Item number: 10256 Nsdsd Dwi Hopfx Ad Nskt Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Condition: good (used), Used stainless steel reactor with double jacket, insulation and agitator Item number: 10257 Final use: Chemicals Volume: approx. 8000L Operating pressure: +16/-1 Bar Nodpfsd Dwmwox Ad Nekt Type: Standing on feet Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Underbody: dished boiler end Top soil: dished boiler end Tank dimensions: Container inner diameter: 2140mm cyl. height: 1600mm Total height: Ca 3820mm height of the feet: 710mm outer diameter: 2200mm distance drain to floor: 500mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / steel painted facilities: Insulation Double jacket around cylinder Various connections on the top panel Manhole cover on the top floor Agitator with double-acting mechanical seal

Condition: ready for operation (used), Used stainless steel reactor with double jacket and insulation item number: 10255 Final use: Chemicals Volume: approx. 7000L Working pressure: +6/-1 Bar Operating pressure double jacket: +12Bar Operating temperature: Max. 200°C Type: Standing on feet with claws Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Underbody: dished boiler end Top plate: dished end with flange ring Operating pressure according to type plate: ATM Tank dimensions: Container inner diameter: 1790mm cyl. height: 950mm Total height: Ca 1860mm height of the feet: 670mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / steel painted Nkedpfx Adsd Dwkwe Not facilities: Top panel completely removable, flanged Insulation Double jacket around cylinder and underbody Various connections on the top panel Manhole cover on the top floor

Condition: excellent (used), Used stainless steel roll container Item number: 10498 Last use: Pharmacy Volume: approx. 120 litres Type: Standing on 4 castors, on rolling frame Material (wetted parts): 1.4571 / AISI316 Construction: Single-walled Bottom: Curved Upper bottom: Curved Working pressure acc. to type plate: ATM Test pressure acc. to type plate: 3 bar Tank dimension: Outer diameter: 710mm Height of feet: 170mm distance drain to floor: 380mm Nodpoflwtyofx Ad Nokt Total height: 1220mm Total width: 930mm Total length: 1180mm Materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Facilities: Outlet: 6mm nipple on riser pipe Outlet type: Servomotor Various connections on top Roller frame

Condition: good (used), Used stainless steel reactor with double jacket, insulation and agitator Nkedsd Dym Nspfx Ad Net 3 pieces available Item number: 10264 Last use: Chemistry Volume: approx. 2000L Operating pressure: +2 bar Type: Vertical on feet Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Bottom: dished bottom Top base: dished base, flanged Container dimensions: Tank inner diameter: 1200mm Cylinder height: 1520mm Total height: approx. 2550mm Height of feet: 290mm Outer diameter: 1400mm Distance drain to floor: 110mm Materials: Inside: 1.4301 / AISI 304 Exterior: 1.4301 / AISI 304 Equipment: Insulation Double jacket Flanged top floor Various connections on the top floor Dome cover on the top floor EKATO agitator / propeller

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, usable tank capacity: 3,400 l, Equipment: documentation/manual, Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU, 3400 liters, with jacket and rear triple-blade agitator. Year 2019. Mounted on 3 support brackets. Manhole diameter: 495 mm. Volume Total capacity 3400 L Material Njdpfx Aew U Tx Ujd Nokt Hastelloy C-276 Technical details Year of manufacture 2019 Equipment configuration Agitator Jacket On support brackets Equipment dimensions Internal diameter 1600 mm Cylindrical height 1600 mm Transport information Width 2300 mm Height 3000 mm Weight 1150 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. Nkjdpsv Rr E Iefx Ad Net With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: used, tank capacity: 2,732 l, GENERAL Equipment: Discharge tap Design: vertical Remarks: Total height including agitator shaft; handhole diameter 200 mm Internal diameter: 1,690 mm Total height: 2,200 mm Heating/Cooling: available Max. permissible operating temperature: 80°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 0.50 bar Top: bolted cover Agitator: anchor agitator Support type: height-adjustable feet Location: Bremen Cylinder tempering: half-pipe coil Nameplate: Volume: 2,732 liters Double jacket volume: 51.0 liters Nsdpfxexqa U Ts Ad Nskt Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 970 mm Last intended use: Chemicals TANK Max. permissible operating temperature: 80°C Number of feet: 4 pcs EQUIPMENT Manhole/Dome: handhole Note: Motor/gearbox missing, handhole cover missing Outlet: 25 mm MATERIAL PROPERTIES Foot material: stainless steel AGITATOR 1 Agitator arrangement: central, top-mounted

Condition: used, tank capacity: 3,500 l, GENERAL INFORMATION Features: Crane lifting lugs Design: Vertical Remarks: Armaflex insulation on the lid and upper cylinder area (see photos) Speed: 395 rpm Outer diameter: 1,660 mm Inner diameter: 1,580 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Overall height: 4,550 mm Heating/cooling: available Power: 6.8 kW Max. permissible operating temperature: 15 °C Max. permissible operating overpressure: 4.0 bar Maximum overpressure: 4.00 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Support type: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.00 bar Volume: 3,500 liters Double jacket volume: 320.0 liters Product-contact material: V2A 1.4541 (AISI321) Condition: Used Cylindrical height: 1,700 mm Last application: Chemicals TANK Nodpfx Adsxqa Uys Nokt Max. permissible operating temperature: 120 °C Number of feet: 4 pcs. HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Outlet: Flange DN50 Note: Slight residues MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4541 (AISI304) Foot material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 volts Agitator arrangement: Eccentrically mounted on the top head Agitator features: Protective cover over the motor hood is bent

Condition: used, tank capacity: 2,750 l, GENERAL INFORMATION Design: Suspended Remarks: 2 support brackets made from Fe (contact surface reversed with cut-off steel parts; see photos); further technical documentation available Speed: 313 rpm Internal diameter: 1,400 mm Ex-protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating overpressure: 12.0 bar Max. overpressure: 3.2 bar Agitator: propeller Support type: feet (brackets) Location: Bremen Technical documentation: drawing available Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,410 mm Last application: pharmaceutical chemistry Nkjdpfoxqa S Sox Ad Njt VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom tempering: half-pipe coil EQUIPMENT Manhole/Dome: on top head Outlet: available Note: Manhole cover clad, metallic discoloration inside Outlet: 130 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4541 (AISI304) AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: eccentric in top head Top head wall thickness: 7 mm

Condition: used, tank capacity: 1,345 l, GENERAL INFORMATION Design: suspended Remarks: 2 support lugs made of V2A (support surface oriented differently; see photos); 1 vessel is equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,900 mm Heating/cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: propeller Mounting type: support lugs Location: Bremen Technical documentation: drawing Cylinder jacket tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,370 mm Previous application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom head tempering: half-pipe coil EQUIPMENT Nksdsxqa S Ejpfx Ad Net Outlet: Flange DN80 Note: slight residues present MATERIAL SPECIFICATION Temper system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm Agitator arrangement: eccentric in the upper head

Condition: used, tank capacity: 3,532 l, GENERAL Design: Suspended Remarks: 3 bracket feet made of steel; half-pipe coil around the lower cylinder area; one heating connection likely slightly bent Speed: 313 rpm Outer diameter: 1,800 mm Inner diameter: 1,590 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal without thermosiphon vessel Agitator: Propeller Mounting type: Bracket feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,532 liters Jacket volume: 103.0 liters Jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4429 (AISI316) Condition: Used Last application: Pharmaceutical chemistry VESSEL Max. permissible operating temperature: 100 °C HEATING/COOLING JACKET Base temperature control: Half-pipe coil INSULATION Insulation material: Aluminium EQUIPMENT Manhole / dome: In the top head (DN 500) Outlet: available Njdpfjxqa Srex Ad Nekt Note: Dents in the insulation jacket, manhole cover plated AGITATOR 1 Agitator arrangement: Eccentric in the top head Agitator equipment: Comprehensive agitator documentation available

Condition: used, tank capacity: 1,969 l, GENERAL Design: suspended Remarks: 2 support brackets made of V2A (support surface reversed; see photos) Rotational speed: 571 rpm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Overall height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Shaft sealing: mechanical seal without thermosiphon vessel Agitator: propeller Pedestal type: bracket Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous use: Pharmaceutical chemistry Nodpfsxqa Slsx Ad Nskt VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: DN80 flange Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm Agitator arrangement: eccentric in the top head Agitator equipment: technical documentation for agitator available

Condition: used, tank capacity: 1,300 l, GENERAL Design: Suspended Remarks: One container is missing the agitator; one container with insulation; two lugs made of V2A (support surface inverted); some flanges made of Fe (see photos) Speed: 571 rpm Internal diameter: 990 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Top closure: bolted cover Agitator: propeller Support type: lugs Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,300 liters Jacket volume: 23.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,330 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: slight adhesions Nedpfx Adexqa Sfj Njkt MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Agitator arrangement: eccentric in top section Top section wall thickness: 4.1 mm

Condition: used, tank capacity: 2,765 l, GENERAL Design: suspended Comments: Vessel externally sandblasted and primed; double jacket bolted to lower end plate (see photos); 4 mounting lugs made of steel; exterior surface partially corroded (may require repairs) Speed: 167 RPM Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/Cooling: available Power: 2.6 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 6.0 bar Agitator: propeller Nedpfx Asxqa R Usd Njkt Support type: mounting lugs Location: Bremen Technical documents: drawing, TÜV certificates Nameplate: Vacuum: 1.0 bar Volume: 2,765 liters Double jacket volume: 42.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,390 mm Last application: chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: flange DN80 Note: slight residues/adhesions AGITATOR 1 Agitator manufacturer: Ekato Voltage: 500 V Interference suppressor: TECHNICAL DATA / DIMENSIONS Lower end plate thickness: 7 mm Agitator arrangement: centrally mounted on upper end plate Upper end plate thickness: 9 mm

Condition: used, tank capacity: 2,750 l, GENERAL Design: suspended Remarks: Support ring Fe; manhole crane bent Speed: 323 rpm Internal diameter: 1,390 mm Explosion-proof: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Overall height: 3,150 mm Heating/Cooling: available Power: 2.6 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Stand type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in upper head (DN 500) Outlet: flange DN100 Nsdpfx Adsxqa R Ie Nokt Note: Manway cover plated MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator arrangement: eccentric in upper head

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; minor dents in the insulation jacket; manhole cover partially plated; manhole diameter 490 mm Speed: 307 rpm Outer diameter: 1,880 mm Inner diameter: 1,590 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Total height: 3,250 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Propeller type of support: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 180.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminum EQUIPMENT Manhole / Dome: in the top head Note: slight residues Outlet: 130 mm MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 Njdpoxqa Rzofx Ad Nokt AGITATOR 1 Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centrally in the top head

Condition: used, tank capacity: 7,385 l, GENERAL INFORMATION Equipment: Crane lugs Design: Hanging Remarks: Manhole DN 350/450; additional technical documentation available External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 4,950 mm Heating/cooling: available Power: 3.07 - 11.2 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: Beam-type agitator Support design: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 7,385 liters Double jacket volume: 735.0 liters Double jacket material: Steel Product contact material: Enamel Condition: Used Last application: Pharmaceutical chemicals TANK Max. permissible operating temperature: 200 °C Nkodpfx Ajxqa Rhed Not HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Jacketed bottom: Double jacket EQUIPMENT Manhole/dome: On top head Outlet: available Outlet: 150 mm MATERIAL SPECIFICATION Base material: Steel Cylinder material: Steel AGITATOR 1 Voltage: 380 Volt Agitator position: Centered in top head Agitator components: Agitator shaft and blades made of stainless steel

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; sheet cuts in the insulation jacket; original manway cover is no longer present (a similar manway cover is supplied loose, see photos); at one connection, the enamel layer is slightly chipped in places (see photos) External diameter: 2,310 mm Internal diameter: 2,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 5,250 mm Heating/Cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 7.0 bar Max. overpressure: 6.0 bar Agitator: anchor agitator Support type: ring Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 litres Double jacket volume: 685.0 litres Double jacket material: steel Product-contacting material: enamel Condition: used Cylindrical height: 2,100 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: double jacket INSULATION Insulation jacket material: aluminium FITTINGS Manway / dome: on top head (DN 500) Outlet: 150 mm MATERIAL SPECIFICATION Head material: steel Cylinder material: steel Nkedsxqa Rbspfx Ad Net AGITATOR 1 Voltage: 400 Volt Agitator mounting: central in the top head

Condition: used, tank capacity: 1,345 l, GENERAL Design: Suspended Remarks: 2 support lugs made of V2A stainless steel (bearing surface inverted; see photos); some flanges made of Fe; heating connections cut off; minor sheet metal cutouts on the insulation jacket Speed: 313 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be verified) Total height: 2,950 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: Propeller Support type: support lugs Location: Bremen Cylinder tempering: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,360 mm Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 200 °C Nedpfx Asxqa N Rjd Njkt HEATING/COOLING JACKET Base tempering: half-pipe coil INSULATION Insulation jacket material: aluminium EQUIPMENT Outlet: flange DN80 Note: slight residues, pressure marks on the insulation jacket MATERIAL COMPOSITION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage Volt: 220/380 Volt Agitator arrangement: eccentric in the top cover

Condition: used, tank capacity: 10,875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; In some areas, the flanges of the top head were welded on the inside with a stainless steel sheet by the previous operator (in some of these sheets, an opening has been cut – see photos); Manhole diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Standing form: Ring Location: Bremen Nodpfjxqa Nwjx Ad Nskt Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double-jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Double-jacket material: V2A 1.4301 (AISI 304) Product-contact surface material: V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 2,200 mm Previous application: Adhesives industry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in top head Outlet: present Note: minor residues, manhole cover missing Outlet: 100 mm MATERIAL SPECIFICATION Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato Voltage: 230/400 Volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Agitator arrangement: central in top head Top head wall thickness: 14 mm

Condition: used, Year of construction: 2001, tank capacity: 280 l, GENERAL Equipment: Control cabinet (no guarantee) Design: upright Year of construction: 2001 Remarks: Max. permissible temperature in test certificate: -10/+120°C; Vessel drawing in JPEG format as well as installation drawing available Speed: 339 rpm Outer diameter: 900 mm Inner diameter: 740 mm Total height: 2,100 mm Nkodpfx Adoxqa Nko Nst Heating/Cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 130°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.5 bar Top cover: removable / tiltable top cover Stirrer: Magnetic stirrer Mounting style: mobile on castors Location: Bremen Technical documentation: Inspection certificate Jacket temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 280 liters Double-jacket volume: 28.0 liters Double-jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 630 mm Previous use: Pharmaceutical VESSEL Max. permissible operating temperature: 130°C Number of feet: 4 pieces HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Outlet: available MATERIAL SPECIFICATION External surface: ground Internal surface: ground Foot material: stainless steel AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2016, tank capacity: 6,000 l, GENERAL Equipment: Crane lugs Design: vertical Year of manufacture: 2016 Remarks: Manhole DN 600; outlet with bolted-on valve; no indication of double jacket acceptance in the inspection report (in a copy of drawing 1160246-1A / 1B there is a signed stamp 'Tested according to AD 2000 Code by TÜV Süd'); parts of the blind plugs may be available Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,630 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Base type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, statics, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 1,400 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulating jacket: hermetically welded Insulation material: Armaflex Insulating jacket material: Stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole/dome: in cylinder Outlet: 187 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel Njdpjxqawnofx Ad Nokt AGITATOR 1 Agitator manufacturer: Metenova AB Voltage: 400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Agitator position: bottom Top wall thickness: 5.8 mm