Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Bjb Ezsvz Hqmjv E Eewl Weight 230 kg Total power requirement 0,5 kw

Year of construction: 2022, Condition: new, bearing diameter 120 mm motor Synchronmotor Nominal turning speed 3000 1/min Maximum turning speed 4000 1/min Bweb Ezv Ejua Ituo Esl Torque 76,4 Nm current 38 A Unused grinding spindle for Höfler Rapid 1250

Condition: used, Year of construction: 2016, machine/vehicle number: 40360227, Used oilburner Weishaupt WM-L30/1-A-R-3LN Beb Ezv Eewb Ew Do Eswl Year 2016 Frequency drive burner fan motor Including manual

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Beb Ezswb A Hijv E Eowl Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Subject of this sale are two steam generators WIMA 500 and WIMA 400 Steam generator WIMA 500 (shown in the photos) - specifications: Steam capacity 500 kg Working pressure 10 bar Burner - fuel oil Speck feed pump WIMA 400 steam generator - specifications: Steam capacity 400 kg Working pressure 10 bar Bjbouabwgj Ezv E Ejwl Burner - fuel oil Speck feed pump

Condition: good (used), Manufacturer: Systema Type: H100 Bwjb Eji D Dkaozv E Esl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1700x2550 mm Weight 1200 kg Total power requirement 2 kw Beb Ejvz Hqgszv E Eewl

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Bob Ezv Eetwwm Ue Eswl

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: RRK 640-850, Boiler RRK 640-850 (rated output 800 kW for fuel with water content W40), max. design temperature 110 °C, max. operating temperature 105 °C, max. design pressure 6 bar, operating pressure 5 bar, medium water Bweb Ezowbr Ipsv E Eol Boiler block with water-cooled walls, horizontal 3-pass heat exchanger with integrated safety heat exchanger, including RECI flue gas recirculation, automatic high-speed heat exchanger cleaning, flue gas fan with frequency converter, MZA multicyclone Fireplace with sliding grate SRF 640-850 for burning wood chips according to EN 14961 or ÖNORM M7133, max. water content by weight 50% (M50, "W50"), max. ash content 7% (A7.0, "A5") Combustion chamber with vacuum control, sliding grate with movable rows of grates for linear displacement of fuel. Fans for primary and secondary combustion air supply. Including de-ashing of the boiler with a hydraulic slide and ash removal. Boiler filling using a screw conveyor SBA TS system Filling screw conveyor with motor, backfire port flap

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. Bwsb Ezv Eewb Axro Esl The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, The object of the sale is four steam generators: the Certuss 200, Certuss 400, Certuss 500 and Certuss 1800. Certuss 200 steam generator specification: Capacity 200 kg, Working pressure 10 bar, Oil burner, Speck feed pump. Certuss 400 steam generator - specifications: Steam capacity 400 kg, Burner - fuel oil, Working pressure - 10 bar, Speck feed pump, New integrated SUW water preparation module Certuss 500 steam generator - specifications: Capacity 500 kg, Beb Ezeuacgvjv E Ejwl Working pressure 10 bar, Burner - gas, Year of production 2004. Certuss 1800 steam generator - specifications: Capacity 1800 kg, Working pressure 16 bar, Burner - fuel oil, Speck feed pump.

Condition: good (used), Manufacturer: Systema Bob Ezv Esi D Dkde Eewl Type: H100

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Weight 650 kg Total power requirement 1,05 kw Bwsb Ezv Ejvz Hhxj Ejl

Condition: used, Year of construction: 1979, 31.5 MV power transformer, 110 kV / 10.5 kV with tap changer (19 steps), with expander, Buchholz relay, dehumidifier, switching group Yy0, transformer book available Bjb Ezv Ejrk Nrtj Ejwl

Condition: excellent (used), ELECTRIC TRANSFORMATION CABIN, WITH 500 KVA THREE-PHASE TRANSFORMER – PRIMARY CURRENT 6000V – SECONDARY CURRENT 400 V, COMPLETE WITH DISCONNECTING SWITCHES Bwjb Eswbqx Tjzv E Esl

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Bjb Ezvowb Amij E Eewl Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Low-temperature Water Heating Boiler BOREX 360kW with Sawdust Automatic Type "Innowex-Borex-AT" Beb Ezvjwbn Hbo E Eowl The boiler is adapted to burn sawdust or wood chips of small granulation. Boiler parameters: Boiler power: 360kW Automatic power: 300kW Year of production: 2011

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 41.728.010, nominal power: 170 kW (231.14 HP), Hot air generator, diesel fueled, 170kW; 15,000 m/h usable, used Bsbou Sb S Re Ezv E Eewl

Condition: repair required (used), color: green, output voltage: 690 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: 0852773/01, The generator is as shown in the photos. It is offered on an "as is" basis, so there are no warranties or returns. For more details, please contact us. Technical Features: Serial Number: 0852773/01 Machine ID: P05E388280 Bjb Ezvjwbhi Aj E Ejwl Frame/Core: LVSI804W2 KVA Base Rate (BR): 3555 KW Base Rate (BR): 2844 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Amperage Base Rate (BR): 2974.6 Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 75V Excitation Amperage: 3.70 Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding (Stator Connection): STAR

Condition: used, Year of construction: 1999, Functionality: fully functional, Equipment: type plate available, 3500 kVA oil transformer, SGB, built 1999, with expander, Buchholz relay, 22 kV - 4 x 400V / 20kV, switching group Ya0(d), with diverter switch, dial thermometer, Bwjb Ezot Iu Shsv E Eol OS/US porcelain bushings

Condition: like new (used), Year of construction: 2010, Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s height: 1900 mm width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm busbar: AL 50 x 10 mm Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Bwsb Ezvonfu Dyj E Esl Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast resin transformer: Type: Cast resin Upper voltage: 10 kV Undervoltage: 400-230 V Circuit: Dyn5 Year of manufacture: 2010 Weight: 1,8 t The pressure relief of the switchgear is done by a pressure relief room in the lower part of the switchgear panel Documentation: Test report Circuit diagram Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: repair required (used), machine/vehicle number: MT31556, overall weight: 1,780 kg, color: grey, output current: 981 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power (apparent): 680 kVA, motor speed: 1,500 rpm, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The product was serviced many years ago and needs inspection before commissioning. For more details, please contact us. Specifications: Generator type: MJB 355 MA4 Code: MJB3532G067M0 Weight: 1780 kg Phases: 3 Serial number: MT31556 Insulation class: H Degree of protection: IP 23 Power factor (P.F.): 0.8 S1 CONTINUOUS DUTY (at an ambient temperature of 40°C): 680 kVA Voltage: 400 V (Y-star configuration) Beb Ezet Hvftjv E Eswl Current: 981 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 660 kVA Voltage: 220 V (Y star configuration) Current: 1732 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 775 kVA Voltage: 440 V (Y star configuration) Current: 1017 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 24.4 V Excitation current: 3.7 A STAND BY DUTY (at an ambient temperature of 27°C): 750 kVA Voltage: 400 V (Y-star configuration) Current: 984 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 28.6 V Excitation current: 4.2 A 855 kVA Voltage: 440 V (Y star configuration) Current: 1122 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 25 V Excitation current: 3.8 A Standards and Certifications: Standards: EN 60034-1, IEC 60034-1 CE Mark

Condition: used, Year of construction: 2010, 3500 kVA cast resin transformer, SGB, 2010, 20 kV +-2x2.5% / 0.69 kV, Dyn5 Beb Ezsuv D N Hev E Ejwl

Condition: repair required (used), output voltage: 400 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: A16H328962, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. For more details, please contact us. Beb Ezstynqpjv E Ejwl Technical Specifications: Serial Number: A16H328962 Frame/Core: HCG634H2 KVA Base Rate (BR): 731 KW Base Rate (BR): 584.8 Amperage Base Rate (BR): 1055.1 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 400V Phases: 3 Power Factor (PF): 0.80 Service: Continuous Excitation Voltage: 58 Excitation Amperage: 3.3 Ambient Temperature: 40°C Temperature rise: 105°C Thermal Classification: 180°C Protection Class: IP23 Insulation Class: H Stator Winding: 312 Stator Connection: Star

Condition: repair required (used), machine/vehicle number: 0855555/01, color: green, output voltage: 690 V, output frequency: 50 Hz, motor speed: 1,500 rpm, type of cooling: air, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The alternator has cracks on the rear crankcase and requires inspection before use. For more details, please contact us. Technical Specifications: Serial Number: 0855555/01 Machine ID: P08J155680 Frame/Core: LVS1804S2 KVA Base Rate (BR): 2790 KW Base Rate (BR): 2232 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Base Rate Amperage (BR): 2334.5A Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 68V Excitation Amperage: 3.60A Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Bweb Eotu Hypszv E Eel Insulation Class: Class H Stator Winding: 65 Stator Connection: Star