Used components & accessories for sale (81)

Year of construction: 2009, condition: used, Total volume: 3,000l, max. allowable pressure: 0.5bar, test pressure: 2bar, max. temperature: 110°C, including flash tank, cooler and two boiler feedwater pumps, operated with demineralized water. An on-site inspection is possible. Nedps Ad Nrrofx Ag Iolh

Year of construction: 2005, condition: excellent (used), machine/vehicle number: DN-BD2-400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock quantity: approximately 250 linear meters!!! Type BD2-400A / 400 Amperes - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Nledpfxjrfwnko Ag Ieh Busbar length 3.25m Price per meter including connectors, end pieces, and mounting brackets Feed-in and tap-off boxes 16-32-63-125-250A are available as optional extras Dismantling was carried out by a qualified electrician. Busbars are in TOP condition!!!! Please inquire about the desired lengths or accessories! In stock, immediately available!!! Note: 100A, 160A, and 250A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feed-in and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Please inquire! Are you also looking for a crane system?

Condition: like new (used), number 7 Stück weight 3,75 kg/Stück range L-W-H 175x 75 x 130 mm Multi Quick MQ 110 Set – (Item No. 110-091-2022 – Clamping force 40 kN) This infinitely adjustable clamping element is characterised by maximum horizontal and vertical adjustability thanks to an integrated support plate. Applications include plastics technology, machining and metal forming. Njdpfx Agjzuplvj Ijlh --> high clamping force --> low tightening torque Price per unit, discount for bulk purchases

Condition: used, For sale: resonator turbine removed from a Finn-Power L6A CO2 laser. Two units available. The turbines are in good condition, but it is recommended to replace the turbine bearings. Manufacturer: PRC Manufacturer code: 1111T2C115MC380VS Revision: REV14 Nedpfey Sz Tijx Ag Iolh Price per unit: 6000 EUR. If you have any further questions, please do not hesitate to ask.

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBUT100A, Telemecanique / Schneider Canalis KNT - 100A busbar system - complete package Nledpfjrwiydsx Ag Ijh Stock approx. 85 running meters Canalis KNT 100 ED4204 + ED4306 100A Ampere - 5 poles - L1 L2 L3 N PE Voltage Ui max. 500V, frequency 50 - 60 Hz Bar length: 25x 3m 9x 1.5m incl. connectors, various end pieces and brackets, flexible corner connectors and several outlet boxes Dismantling was carried out by a qualified electrician. Busbars are in very good condition Only for sale complete Stock items, immediately available ----- old Kloeckner Moeller BD1 system still available ! Busbars, corner parts, feeders and outgoing feeders for the old Kloeckner Moeller BD1 / BD 1 system available !!! Please inquire ! Are you also looking for a crane system?

Condition: like new (used), number 8 Stück weight 3,8 kg/Stück range L-W-H 180 x 70 x 90 mm Mounting block B50 - (Item No. Holding force 50 kN) This mounting block, made from high-strength aluminium, is an ideal complement Nledpfxszdk Eps Ag Ieh to clamping elements in the MQ series and, to a limited extent, the S series, where clamping heights vary. Applications include forming technology and machining technology --> Height = 90 mm --> Length = 180 mm Price per unit, discount available for bulk purchases

Condition: used, For sale: two switch-mode power supplies removed from a Finn-Power L6A CO2 laser. Manufacturer: PRC Manufacturer’s code: D8946006S/10 | 0009 HV 401 and D8946006S/12 | 0106HV402 Revision: REV10 / REV12 Nsdpfxsy Tt Ets Ag Ijlh Price per unit: 3000 EUR. If you have any further questions, please do not hesitate to ask.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: DN-SS-250-1000A, Telemecanique / Schneider Canalis KSA - Busbar System Type KSA, 5-pole - L1 L2 L3 N PE Current stock: 250A - approx. 100m 400A - approx. 400m 630A - approx. 60m 1000A - approx. 110m Voltage Ui max. 690V, Frequency 50 - 60 Hz Busbar lengths available, predominantly 5m and 3m Price per meter from 125 Euros incl. connectors and supports Feeder boxes, end pieces, and tap-off boxes 16-32-63A are available as optional extras (Other tap-off boxes 125 - 160 - 250 - 400A available upon request) The dismantling was carried out by a qualified electrician. Busbars are in TOP condition!!!! Nedpfx Agsz E Dchs Ielh Please inquire about the desired lengths or accessories! In stock, immediately available!!! We also have the Kloeckner Moeller BD1 system in stock! (Busbars, corner pieces, feeders, and tap-off boxes) Please inquire! Are you also looking for a crane system?

Condition: used, For sale: a computer from a Finn-Power L6A CO2 laser system. Manufacturer: BECKHOFF Manufacturer's code: C6650-0050 / 000f56jh Revision: REV14 Nlodpfx Asy Tt Uneg Ish Price: 2000 EUR. If you have any further questions, please do not hesitate to ask.

Condition: used, Touchscreen, keyboard, mouse For sale: operator panel removed from a Finn-Power L6A CO2 laser. Touchscreen, keyboard, mouse. Manufacturer: BECKHOFF Manufacturer’s code: CP6802-1007-0010 / 387162-010 Touch screen: Siemens / 1P 6FC5203-0AC00-1AA0 / SINUMERIK 840 D CNC KEYBOARD (AT) OP032S Price: 1000 EUR. Nledoy Tt R Aepfx Ag Ieh If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Nledpfx Aoy U Uc Njg Ieh Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present

Condition: used, For sale: a focusing lens assembly removed from a Finn-Power L6A CO2 laser. Nsdpfx Agey Ttz Io Islh Manufacturer: PRECITEC Manufacturer’s part number: P0464-130-00001 Note: For FINN-POWER, PRIMA POWER LASERS Price: 1000 EUR. If you have any further questions, please do not hesitate to ask.

Condition: used, MFC – Digitally controlled gas mass flow controller, mass flow controller Elastomer-sealed mass flow controller, flow regulation, flow meter, flow controller, valve MKS Type GE250A-34328 Serial No. Nsdpoz Ek Svjfx Ag Ielh STD Model No. GE250A013255T6V3020 STD Serial No. Year of manufacture 2019 (New / unused in original packaging) Power connection +24VDC (M8 connector, 5-pin, male) Power consumption

Year of construction: 2012, condition: excellent (used), Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece Nlodpfx Aov Hbk Esg Ish -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Year of construction: 2022, condition: ready for operation (used), Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible. Nlodpfx Agjwl I A Dj Ijh

Condition: new, For sale are 2 new axial fans from Ziehl-Abegg, with a diameter of approximately 1.10 m. Njdpfxoz Nv Rtj Ag Iolh

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Nlodpjzuplpsfx Ag Ioh Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Condition: excellent (used), 1 flywheel 1260 mm Ø, weight approx. 500 kg 1 flywheel, 1320 mm in diameter x 220 mm wide, approx. 40 mm ring thickness Nljdpfx Ajwb A Sfeg Ieh

Condition: like new (used), number 3 Stück weight 3,05 kg/Stück range L-W-H 250 x 66 x 40 mm Beveled fork clamping block, DIN 6315 B, slot width × total length: 26 × 250 mm >> Technical Description >> Nedjzd E Urspfx Ag Iolh --> Slot width: 26 mm --> Total length: 250 mm --> For clamping screws: M24 --> Height: 40 mm --> Width: 66 mm --> Type: 6315 B --> Product type: Clamping bar

Condition: like new (used), number 4 Stück weight 3,8 kg range L-W-H 180 x 70 x 180 mm Mounting block B50 - (Item No. Holding force 50 kN) This mounting block, made from high-strength aluminium, is an ideal complement to clamping elements in the MQ series and, to a limited extent, the S series, Nlodpfozc Rruox Ag Ish where clamping heights vary. Applications include forming technology and machining technology --> Height = 180 mm --> Length = 180 mm Price per unit, discount available for bulk purchases

Condition: like new (used), number 2 Stück weight 16,05 kg/Stück range L-W-H 695 x 78 x 60 mm Beveled fork clamping bar, DIN 6315 B, slot width × total length: 30 × 695 mm >> Technical Description >> --> Slot width: 30 mm Nsdpfezd E T Uex Ag Ijlh --> Total length: 695 mm --> For clamping screws: M30 --> Height: 60 mm --> Width: 78 mm --> Type: 6315 B --> Product type: Clamping bar

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2250A, Complete Klöckner Möller - Siemens BD2 - 250A busbar system available! Stock 81.25 running meters!!! Type BD2-250A / 250 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 400A rails available - please inquire!!! ----- Nljdpforfwngjx Ag Ish old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: used, Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc. Nljdpsqmt Avofx Ag Ish

Condition: used, For sale: a resonator turbine inverter, removed from a Finn-Power L6A CO2 laser. Two units are available. The inverters are in good condition. Manufacturer: KEB combivert Manufacturer’s code: 0308A757 / 57251, additional code 15.F4.CNE-A001 Revision: V 1.4 PRC laser Price per unit: 400 EUR. Nlodjy Sz Utspfx Ag Ijh If you have any further questions, please do not hesitate to ask.

Condition: new, amount 1 STK height 450 mm external diameter 340 mm Nsdpfx Asul Eh Ueg Islh Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm