Condition: used, Year of construction: 1996, Functionality: not functional, fuel: diesel, overall weight: 6,000 kg, continuous power (apparent): 725 kVA, nominal power (apparent): 725 kVA, MARELLI Mod Nettuno diesel generator, manufactured in 1996, with PERKINS engines and 725 KW. Stopped for 5 years. Need to be revised or repaired once it was controlled directly from harbour crane and no power on/off control on it Feb E Uoh Elp Eow T Uopg

Condition: good (used), Manufacturer: Systema Fpebsi D Dkas E Uw T Uog Type: H100

Year of construction: 2019, Condition: like new (used), Condition: As good as new Fob E Uw Tok Sgwae Uopg Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: used, Year of construction: 2016, machine/vehicle number: 40360227, Used oilburner Weishaupt WM-L30/1-A-R-3LN Fpjb E Uw Tewb Ew Ds Ueg Year 2016 Frequency drive burner fan motor Including manual

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Fpeb Eewb A Hio Uw T Ueg Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Subject of this sale are two steam generators WIMA 500 and WIMA 400 Steam generator WIMA 500 (shown in the photos) - specifications: Steam capacity 500 kg Working pressure 10 bar Burner - fuel oil Speck feed pump WIMA 400 steam generator - specifications: Fpob Eouabwgo Uw T Ujg Steam capacity 400 kg Working pressure 10 bar Burner - fuel oil Speck feed pump

Condition: used, Year of construction: 2013, 10 MVA cast resin transformer, 10500 V +- 2x2.5 % / 6000 V, Yy0, year 2013 Fpsb E Uw Tjtwwm Uj Ujg

Condition: good (used), Manufacturer: Systema Febei D Dkds E Uw T Uspg Type: H100

Condition: excellent (used), ELECTRIC TRANSFORMATION CABIN, WITH 500 KVA THREE-PHASE TRANSFORMER – PRIMARY CURRENT 6000V – SECONDARY CURRENT 400 V, COMPLETE WITH DISCONNECTING SWITCHES Fpjbewbqx Tj E Uw T Ueg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Low-temperature Water Heating Boiler BOREX 360kW with Sawdust Automatic Type "Innowex-Borex-AT" The boiler is adapted to burn sawdust or wood chips of small granulation. Boiler parameters: Boiler power: 360kW Fpobjwbn Hbe E Uw T Usg Automatic power: 300kW Year of production: 2011

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Fpsbewb Axro E Uw T Uog Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, The object of the sale is four steam generators: the Certuss 200, Certuss 400, Certuss 500 and Certuss 1800. Certuss 200 steam generator specification: Capacity 200 kg, Working pressure 10 bar, Oil burner, Speck feed pump. Certuss 400 steam generator - specifications: Steam capacity 400 kg, Burner - fuel oil, Working pressure - 10 bar, Speck feed pump, New integrated SUW water preparation module Fob Ejuacgvo Uw T Uspg Certuss 500 steam generator - specifications: Capacity 500 kg, Working pressure 10 bar, Burner - gas, Year of production 2004. Certuss 1800 steam generator - specifications: Capacity 1800 kg, Working pressure 16 bar, Burner - fuel oil, Speck feed pump.

Condition: used, Year of construction: 1979, 31.5 MV power transformer, 110 kV / 10.5 kV with tap changer (19 steps), with expander, Buchholz relay, dehumidifier, switching group Yy0, Feb Esrk Nrto Uw T Ujpg transformer book available

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 41.728.010, nominal power: 170 kW (231.14 HP), Hot air generator, diesel fueled, 170kW; 15,000 m/h usable, used Fpjb Eju Sb S Rj Uw T Ueg

Condition: repair required (used), color: green, output voltage: 690 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: 0852773/01, The generator is as shown in the photos. It is offered on an "as is" basis, so there are no warranties or returns. For more details, please contact us. Technical Features: Serial Number: 0852773/01 Machine ID: P05E388280 Frame/Core: LVSI804W2 KVA Base Rate (BR): 3555 KW Base Rate (BR): 2844 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Amperage Base Rate (BR): 2974.6 Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 75V Fpsbowbhi As E Uw T Uog Excitation Amperage: 3.70 Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding (Stator Connection): STAR

Year of construction: 2007, Condition: like new (used), Technical data, please see in pdf document. Fpjb E Uw Tsha Dm To Uog

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Fpsbjwb Amis E Uw T Uog Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet Fpob E Uovlkdxow T Ujg - Chimney 12m - All smoke lines - Complete with electrical and hydraulic system Very good facility. Ready dismantled, ready for loading.

Condition: used, Year of construction: 1999, Functionality: fully functional, Equipment: type plate available, 3500 kVA oil transformer, SGB, built 1999, with expander, Buchholz relay, 22 kV - 4 x 400V / 20kV, switching group Ya0(d), with diverter switch, dial thermometer, OS/US porcelain bushings Fsb Est Iu Sho Uw T Ujpg

Condition: like new (used), Year of construction: 2014, operating hours: 1,654 h, Functionality: fully functional, machine/vehicle number: sek00801, fuel type: diesel, color: yellow, power: 2,000 kW (2,719.24 HP), output voltage: 11,000 V, nominal power: 2,000 kW (2,719.24 HP), nominal power (apparent): 2,500 kVA, motor manufacturer: USA, Caterpillar generator model 3516C 2000KW 2500KVA 2014 Fpob E Uw Towa D Eqj Ueg

Condition: repair required (used), machine/vehicle number: MT31556, overall weight: 1,780 kg, color: grey, output current: 981 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power (apparent): 680 kVA, motor speed: 1,500 rpm, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The product was serviced many years ago and needs inspection before commissioning. For more details, please contact us. Specifications: Generator type: MJB 355 MA4 Code: MJB3532G067M0 Weight: 1780 kg Phases: 3 Serial number: MT31556 Insulation class: H Degree of protection: IP 23 Power factor (P.F.): 0.8 S1 CONTINUOUS DUTY (at an ambient temperature of 40°C): 680 kVA Voltage: 400 V (Y-star configuration) Current: 981 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 660 kVA Voltage: 220 V (Y star configuration) Current: 1732 A Frequency: 50 Hz Speed: 1500 rpm Excitation voltage: 26.5 V Excitation current: 3.9 A 775 kVA Voltage: 440 V (Y star configuration) Current: 1017 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 24.4 V Excitation current: 3.7 A STAND BY DUTY (at an ambient temperature of 27°C): 750 kVA Voltage: 400 V (Y-star configuration) Current: 984 A Frequency: 50 Hz Fob E Ust Hvftsw T Ujpg Speed: 1500 rpm Excitation voltage: 28.6 V Excitation current: 4.2 A 855 kVA Voltage: 440 V (Y star configuration) Current: 1122 A Frequency: 60 Hz Speed: 1800 rpm Excitation voltage: 25 V Excitation current: 3.8 A Standards and Certifications: Standards: EN 60034-1, IEC 60034-1 CE Mark

Condition: like new (used), Year of construction: 2010, Horlemann HR10U-S switchgear 12 kV HR 10U the universal switchgear for industry and utilities Modular medium-voltage switchgear for the distribution of solar power switchgear: Manufacturer: Hörtemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short circuit power: 20 kA/1s height: 1900 mm width: 4550 mm Depth: 750 mm Cell width: 7 x 650 mm Feb Ejnfu Dys Uw T Ujpg busbar: AL 50 x 10 mm Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV Ip: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast resin transformer: Type: Cast resin Upper voltage: 10 kV Undervoltage: 400-230 V Circuit: Dyn5 Year of manufacture: 2010 Weight: 1,8 t The pressure relief of the switchgear is done by a pressure relief room in the lower part of the switchgear panel Documentation: Test report Circuit diagram Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2010, 3500 kVA cast resin transformer, SGB, 2010, 20 kV +-2x2.5% / 0.69 kV, Dyn5 Fsbsuv D N Hj E Uw T Uepg

Condition: repair required (used), output voltage: 400 V, ambient temperature (max.): 40 °C, motor speed: 1,500 rpm, output frequency: 50 Hz, machine/vehicle number: A16H328962, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. Fpebotynqpo E Uw T Ujg For more details, please contact us. Technical Specifications: Serial Number: A16H328962 Frame/Core: HCG634H2 KVA Base Rate (BR): 731 KW Base Rate (BR): 584.8 Amperage Base Rate (BR): 1055.1 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 400V Phases: 3 Power Factor (PF): 0.80 Service: Continuous Excitation Voltage: 58 Excitation Amperage: 3.3 Ambient Temperature: 40°C Temperature rise: 105°C Thermal Classification: 180°C Protection Class: IP23 Insulation Class: H Stator Winding: 312 Stator Connection: Star

Condition: repair required (used), machine/vehicle number: 0855555/01, color: green, output voltage: 690 V, output frequency: 50 Hz, motor speed: 1,500 rpm, type of cooling: air, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The alternator has cracks on the rear crankcase and requires inspection before use. For more details, please contact us. Feb Eetu Hypj Uw T Uopg Technical Specifications: Serial Number: 0855555/01 Machine ID: P08J155680 Frame/Core: LVS1804S2 KVA Base Rate (BR): 2790 KW Base Rate (BR): 2232 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Base Rate Amperage (BR): 2334.5A Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 68V Excitation Amperage: 3.60A Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding: 65 Stator Connection: Star