Alternator

STAMFORD LVSI804W2

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Dcedpfx Aswuz E Rea Eed Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a dual belt drive, 36 carbide-tipped blades, and hydraulic equipment, it is perfect for tractors from 110 HP upwards – reliable, high-performance, and ready for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 HP Weight: approx. 1,800 kg Hitch: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with blades) Blades: 36 pieces, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-position adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for roller) Features: Hydraulic rear flap & roller Included: PTO shaft Prices + VAT: Dcedpfx Ajwhyzwsa Esd Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR ----- Contact us for a tailor-made offer!

Condition: good (used), Year of construction: 2005, functionality: fully functional, packaging machine Dcodpfx Aaowpx Uxj Eod

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) Dsdpsxwnxgjfx Aa Eocd - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Year of construction: 2026, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Dcodpfx Aechb Ryea Esd Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Condition: used, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 20 - double exit - Power 20kw Dsdpfx Aaet U Itfj Eocd - triod ITL12

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Dcjdpfsx Dikkjx Aa Eed

Condition: used, Year of construction: 1995, Used Filling Monoblock FIMER 16-1 up to 3500 BPH Introduction to the Filling Monoblock FIMER 16-1 The Used Filling Monoblock FIMER 16-1 excels in the bottling industry with its impressive production capacity of up to 3500 bottles per hour (BPH). Originally designed in 1995, this machinery combines robust construction with advanced technology, thereby establishing itself as a top choice for companies that prioritize efficiency without compromise. Dsdpfxovgvlws Aa Ejcd Technical Specifications Equipped with 16 valves, this monoblock operates using a gravity or light depression filling system. Ideally, it minimizes foam formation and ensures even filling. This type of monoblock works perfectly for fillining spitrits and still wines. Moreover, the system adapts seamlessly to bottle sizes of 0.70 L and 1.0 L, significantly enhancing production line versatility. Components and Operation Furthermore, the capping system of the Filling Monoblock FIMER 16-1 employs a fixed nozzle, specifically designed for T-stoppers. The capping head effectively manages 21 mm diameter caps, securing a reliable and high-quality seal crucial for preserving the bottled contents. Configuration and Maintenance Currently, the Monoblock, still in production, demonstrates significant reliability and maintenance ease. Its design incorporates a clockwise rotation, an important consideration for integrating the machinery into existing lines to optimize workflow. Efficiency and Sustainability Additionally, this Filling Monoblock not only achieves high efficiency in production capacity but also adheres to sustainability standards by minimizing material waste. Consequently, this feature becomes increasingly vital for companies committed to reducing their environmental impact. Final Considerations of the Filling Monoblock FIMER 16-1 Employing the Filling Monoblock FIMER 16-1 reflects a commitment to maintaining high-quality and efficiency standards in the bottling industry. Its proven reliability, combined with modern maintenance practices, ensures that this machine remains essential for any bottling operation striving for excellence. Ultimately, investing in a system like this Filling Monoblock  is a wise decision for the future of production.

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Dodpex A Hdxsfx Aa Escd Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Dcsdjw Tivmspfx Aa Esd Operating Units: 9 nr