Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Dcjleff Hdmjiqy Dlog Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: good (used), Year of construction: 2023, Working width 510 mm Working height 254 mm Motor output 7,3 kW Length of the planing table 2250 mm Feed speed 4-16 m/min. Doliqy Dewbi D Ujlecg

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: Good Equipment and technical data: Maximum equipment for the professional, optionally with Tersa or spiral cutter block Djliqy Dowbay Hslecg With TERSA cutter block for rapid blade changes TERSA cutter block system enables particularly quiet operation Helix-toothed steel feed roller for constant and even material feed Material feed with two speeds via separate motor The extra-long planing tables enable easy and precise planing of workpieces Work tables are made of gray cast iron, post-annealed and stress-free, thus robust and permanently flat Planing tables open simultaneously to the rear for short setup times Planer thickness table adjustment via handwheel with numerical display for planing height The heavy machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/gray cast iron construction Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller (ideal for economical planing of fine wood) Quality - Made in Europe Features: Tersa planer cutter block No more adjustments or screwing Planer cutters change in seconds Self-locking Extremely quiet operation Material feed Helix-toothed steel feed rollers for constant and even wood feed without marks Multiple teeth engage simultaneously for powerful feed Wear-free unlike rubber feed rollers Permanently mounted extraction hood Thanks to the permanently mounted extraction hood, reconnecting the extraction hose is no longer necessary during conversion. This saves valuable working time Simultaneous opening of the planing tables Simultaneous folding of the planing tables with tension spring support for quick and convenient conversion to thicknessing in seconds Thicknessing table adjustment FS 41 elite s with thicknessing table adjustment via handwheel with integrated display The thicknessing table is mounted on four large spindles, ensuring maximum stability under all working conditions. Thanks to the special lifting device, the table position is maintained perfectly even without locking. Kickback guards Solid kickback guards prevent workpieces from kicking back. The 4-knife cutter block ensures an optimal planing finish. Anodized aluminum planer fence Large dimensions (1200 x 150 mm) Easy to move Tilt from 90° to 45° via scale Standard with auxiliary fence for safe planing, even of narrow workpieces. Scope of delivery: Planer and jointer fence with round bar guide 2 feed speeds Tersa cutter block Technical specifications Planer total table length: 2200 mm Planer length of feed table Planer table height Planer working width: 410 mm Planer chip removal: max. 5 mm Planer fence dimensions: 1200 x 150 mm Planer fence pivoting range Thickness table dimensions: 775 x 410 mm Thickness working height: min. 3 mm mm Maximum working height: 240 mm Min. working length: Feed speed: 6 / 12 m/min Planer block speed: 5000 rpm Planer block diameter: 95 mm Number of planer knives: 4 Electrical connection: 400 V / 50 Hz Motor power: 5.0 kW Dimensions

Condition: used, Year of construction: 2017, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Length of the planing table 2500 mm Feed motor 7 kW Feed speed max. 40 m/min. weight of the machine ca. 3500 kg Weinig Powermat 700 ----- Brief summary Manufacturer's description: Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces 8,000 rpm 5 x HSK/Powerlock Window package with glazing bead separation Axial and radial CNC-controlled spindles Large PowerCom Plus control unit with touchscreen Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with mould flight circle 93 - 125 mm) Working height 10 - 160 mm (for tool flight circle 93 - 125 mm) 1st spindle ----- First lower horizontal spindle Dsliqjwa Ulhoy Dlocg Motor 7.5 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment range 17 mm Rebating device, including rebate cutter MarathonCoating in front of 1st lower spindle 2. tool holder POWERLOCK/HSK ----- First right-hand tool holder Motor, together with left vertical spindle 15 KW Speed 8,000 rpm Including high-performance ball bearing Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel for PowerLock 55 mm Translated with (free version) Max. Tool diameter behind stop plane 180 mm Right-hand spindle controlled axially by motor (55 mm), Shortened roller distance compared to the right-hand spindle, designed for a saw diameter of Sawing diameter of 180 mm on the right-hand spindle (centre distance 141 mm). Second feed roller can be quickly adjusted axially. Axial CNC-controlled quick adjustment and positioning of the tool holder tool holder in conjunction with memory function or PowerCom Radial CNC - controlled - quick adjustment and positioning of the tool holder tool holder in conjunction with memory function or PowerCom 3. tool holder POWERLOCK/HSK ----- First left tool holder Shared motor with 1st right vertical spindle Speed 8,000 rpm Including high-performance ball bearing Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel for PowerLock 55 mm Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Adjustment path of the feed rollers in relation to the left-hand spindle, axial 35 mm Extension of the pendulum axis compared to the left-hand spindles to 150 mm Axial CNC-controlled quick adjustment and positioning of the tool holder tool holder in conjunction with memory function or PowerCom Radial CNC - controlled - quick adjustment and positioning of the tool holder tool holder in conjunction with memory function or PowerCom Translated with (free version) 4. tool holder POWERLOCK/HSK ----- First upper tool holder Motor 7.5 KW Speed 8,000 rpm Including high-performance ball bearing Tool fligh...

Condition: used, Year of construction: 1988, Working width: 230 mm Dsliqjwa Rb Sey Dlscg Working height: 130 mm Working shafts: 5 Spindle arrangement: bottom, right, left, top, bottom Lower shaft motor power: 4 kW Right shaft motor power: 5.5 kW Left shaft motor power: 5.5 kW Upper shaft motor power: 5.5 kW Lower shaft motor power: 4 kW Lower shaft adjustment: crank Right shaft adjustment: crank Left shaft adjustment: crank Upper shaft adjustment: electric Planer heads: strip knives Feed speed: infinitely variable Feed roller pressure: pneumatic Current consumption: 50 A Complete power consumption: 21.45 kW Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 2500 kg

Condition: new, Functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake Dslisu Rnqqeqy Dlscg 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dcjliqolht Htey Dlsg Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Weinig Profimat 23E Four-sided Planer Working width 230mm Dcolijway R Asqy Dlog Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pressing of the pulling rollers Electric adjustment of the pressure beam Tabletop lubrication system Year of production 1998

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 07A1137, feed rate X-axis: 28 m/min, working width: 230 mm, planing height: 130 mm, spindle diameter: 40 mm, planing width: 220 mm, working height: 125 mm, total height: 2,110 mm, total length: 4,320 mm, overall weight: 5,100 kg, spindle speed (max.): 6,200 rpm, spindle speed (min.): 6,200 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, motor voltage: 380,415 V, workpiece height (max.): 125 mm, compressed air connection: 8 bar, jointer table length: 2,000 mm, type of input current: three-phase, number of spindles: 6, Equipment: cabin, motor brake, Robinson P1/6 Moulder with 6 heads, No: 07A1137, Year 2007 in very good working condition with very High Spec. Maximum Finished Section: 220 x 125m/m, Minimum Fiished Section: 20 x 6m/m. 2m. Long Infeed Table, Hard Chromed. Pneumatic Pressures to the Feed Rollers. Automatic Bed Lubrication Pump. Central Lubrication to slideways & bearings. 3: Driven Table Rollers. All spindles with seperate motors. Doliqjv Hpgusy Dlecg Bottom: 5.5kw / Right: 5.5kw. / Left: 7.5kw / 1st. Top: 11kw / 2nd. Top: 11kw / 2nd. Bottom: 7.5kw. All Spindles 6200rpm. with mechanical brakes. Chromated Infeed Table and Bed Plates. 5.5kw. Feed Motor, with feed speeds from 6 to 28m/min. Full set of tools included. With Sound & Safety Hood, and overhead Dust Extraction Cluster included. Can be viewed still in situ in Sheffield, Yorkshire UK. Full set of photos on WhatsApp, show your Mobile Number on your enquiry.

Condition: used, Year of construction: 1998, Motor power: 5.5 kW Blade speed: 5000 rpm Knife block: Tersa Z4 Planing height: 2.8-250 mm Planing width: 630 mm Table length: 1260 mm Maximum clamping distance: 8 mm Extraction nozzle: 160 mm Weight: 1115 kg LxWxH: 1140x1260x1200 mm Features: Thicknessing table extension 1500x630 mm in the outlet Safety bar (for space-saving installation in conjunction with a surface planer) Glide rollers in the thicknessing table: Grooved steel feed roller and smooth steel feed roller Storage location: Supplier Dcoliqowc T Elsy Dleg

Condition: ready for operation (used), Hobelbreite 500 mm Max. Hobelhöhe 200 mm Untere Hobelwelle 4 Messer 5.5 kW Motor Obere Hobelwelle 7.5 kW Durchmesser der rechten Spindel 40 mm Motor 4 kW Linker Spindeldurchmesser 40 mm Motor 4 kW Elektrische Höhenverstellung Dslijwc T Dzeqy Dlocg

Condition: new, Year of construction: 2024, working width: 180 mm, planing height: 105 mm, spindle diameter: 35 mm, planing width: 180 mm, working height: 105 mm, total width: 1,200 mm, total height: 1,100 mm, total length: 3,300 mm, overall weight: 1,200 kg, power of feed motor: 4 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 100 mm, motor voltage: 380 V, workpiece height (max.): 115 mm, jointer table length: 2,300 mm, type of input current: three-phase, tool diameter: 100 mm, table length: 2,300 mm, shaft diameter: 35 mm, number of spindles: 4, power: 7.5 kW (10.20 HP), working range: 200 mm, chip removal: 10 mm, frequency: 50 Hz, chip removal for surfacing (max.): 10 mm, input current: 380 A, feed roller diameter: 120 mm, worktable width: 200 mm, blade shaft diameter: 100 mm, Equipment: cabin, motor brake, Profiset 40 with 4 spindles: Dsliqy Doiqb D Eeljcg Electric with height adjustment and manual width adjustment Max. finished size 180 mm x 105 mm Min. finished size 25 mm x 6 mm ----- Position 1. Planing Position 2 Vertical Right Position 3 Vertical Left Position 4 Horizontal Top Feed table 2300 mm Feed speeds 6 and 12 m/min Feed motor 1.5 KW Motors Pos. 2 x = 7.5 KW Driven feed roller in front of the planing shaft 4 Tersa planing heads

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Dsliqy Deh Hp Hyoljcg Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Delebuldyeiqy Dlscg Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic Dcoliqy Dopgkmwslsg T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Dcsliqyjpq If Ds Dlog Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 Doliqy Dot U Rn Selecg planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Year of construction: 2022, Condition: new, Thickness planer KD410 Weight 205 kg Voltage: Doliqyjgx T Hhs Dlocg 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Maximum planing height 230 mm Shaft diameter 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft Dcsliqyod Hx Hne Dlsg No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Doliqyoff Efcs Dlocg Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2025, CASADEI PF 520 M Tersa - Professional planer with 520 mm planing width and motorized adjustment of the planing table. large dimensioned jointer tables made of grey cast iron, hardened and tempered sturdy cast steel construction for precision and longevity the stable dressing fence is easily movable and offers a large supporting surface large dressing fence, inclinable 90° - 45 the inclination of the fence can be easily read from the workplace standard with auxiliary fence large four-blade shaft, precision bearing mounted smooth running due to precision unit and heavy cast iron construction powerful 7,0 kW (S6) motor maximum user safety with simplest operation Scope of delivery: PF 520 M Tersa Swivelling auxiliary fence TX-Matic planing shaft protection device Reinforced main motor 7,0 kW Technical data Total length of the planing tables 2960 mm Planing width 520 mm Dimensions planing fence 1100 x 160 mm Swivel range planing fence 90 - 45 Max. chip removal chip removal 8 mm Planing shaft Ø / number of planing knives 120 mm / 4 pcs. Speed 5000 1/min Motor power 400 V / 50 Hz / P2 / S1 7,0 kW (9,0 PS) Suction nozzle diameter 120 mm Weight Location: ex stock Bitburg Doliqy Dsb D Sblolscg Immediately available

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm Dceliqy Deqlclbjlsg - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Dceliqyjd Hx Hpo Dljg Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Year of construction: 2022, Condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Dsliqy Dedkl Sqjlecg Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available.

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Dceliebxz S Heqy Dlog Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i