Used other measuring & testing equipment for sale (166)

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Rbodpfx Ahov Hzpuszot Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) Rbsdpjiu H Hcefx Ahzst (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment Rjdpfx Ahotqnkljzsbt high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager Rbodpfx Aovcnpashzjt The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Lichtschranke , Schutzfeldhöhe 605 mm , Reichweite bis 6 m , IP 65 Rsdoi An Epepfx Ahzsbt

Year of construction: 2018, condition: excellent (used), zwei Linienlichter mit Stromversorgung und je 10m + 3,5 m Kabel Rbedpfxog Etq Ts Ahzst 24 V,60 W , weiss, 6.500 K ,

Condition: good (used), Lichtschranke ,Schutzfeldhöhe 1.050 mm , Reichweite bis 19 m , IP 65 Rjdpfxji An Hqj Ahzebt

Condition: used, functionality: fully functional, ShowRange SRFD2600 Digital Ultrasonic Flaw Detector Set. Rbsdottrc Ajpfx Ahzjt The rugged SRFD2600 is designed for the severe environment. Its domestically unique omniseal design enables it to resist the damp, sandstorm, dust, and pollution in all sorts of environmental extremes ranging from ocean to desert. The full screen function enables the echo wave displaying area to cover the entire screen so that the operator will have the maximal view. The solid waveform :add the waveform visual contrast and omission will hardly happen during the fast testing. The bulk memory can store up to 1000 data sets,including waveforms, curves,and parameters(including the traditional 1000 channels) Through echo wave-echo wave thickness measurement:the zero calibration can be avoided, and the net thickness of the base material can be directly measured through the coating. Wave Crest Memory: the real-time envelope can display the highest wave of the flaw and record the maximum value of the flaw to help the exact positioning and fast testing of the flaw as well as the qualitative analysis by the envelope waveform. Automatic Gain: automatically adjust the gain to the pre-set amplitude height. Warning Function: afferent echo/lost wave alarm Real-time Clock: automatically record the date and time of the stored waveform. Display Freeze: catching the waveform and the sound path data at any moment and removing the hatch after freezing to measure the echo wave parameters. Flaw Positioning: real time displaying sound path S, horizontal height X, depthY, and wave height H. Good working condition. Please check out our other listings as well.

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! Rjdpfx Ahsw Rkybjzebt During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: used, functionality: fully functional, machine/vehicle number: 14324, Equipment: documentation/manual, lighting, For sale: Zeiss Jena Workshop Microscope WEMI – Large Version – with various accessories Offered for sale is a Zeiss Jena large workshop microscope, type WEMI, suitable for precise inspection and measurement applications in metalworking, toolmaking, quality control, and education. This robust and stable workshop microscope is renowned for its high optical quality and reliability. Thanks to its large design, the system is particularly suitable for inspecting larger workpieces with high precision. Specifications and features: • Manufacturer: Zeiss Jena • Type: WEMI (Werkstattmikroskop) • Model: Large workshop version • Very stable cast iron construction • High-quality Zeiss optics • Suitable for measurement, inspection, and visual control • Fine and precise focusing • Original operation manual included Accessories (including): • Various objectives • Eyepiece(s) • Analog measuring device • Illumination • Additional accessories as shown Condition: • Used, in good working order • Optics clear and undamaged • Normal signs of use consistent with age Delivery: • Includes all accessories as shown Price: • On request Location: • Klazienaveen, Netherlands If you are interested or require additional information, photos, or a viewing, please feel free to contact us via Machineseeker. Rbodsx Ivr Ejpfx Ahzot

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Rsdpfex A Imzsx Ahzjbt Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: 919-313-239-i, For sale is a used thermography camera including protective housing. FLIR A400, Image Streaming, 42° Serial number: 91901277 Scope of delivery: - Cardboard packaging - Infrared camera with lens - Ethernet cable M12 to RJ45, 0.3m - Calibration certificate with login data ##### TOPA ML protective housing for FLIR A400/A500/A700 including 3" germanium window High protection class and chemical resistance: IP67 Rugged design made from anodised aluminium profile Vibration-resistant mounting with effective heat dissipation Dimensions: 96 x 96 x 227mm (W x H x L), excluding cable glands ##### Climate unit for TOPA protective housing with temperature monitoring and emergency shutdown Free-standing unit with high-performance pump, fans and radiator for continuous monitoring of camera temperature and water flow with emergency shutdown in the event of a fault. Typically, the system allows camera operation in ambient temperatures from -50°C to 200°C. The maximum distance between camera and climate unit is 20 meters. The height difference must not exceed 5.7 meters. The scope of delivery includes cables and hoses for a distance up to 3 meters. Includes: Rodpfxjx Ifafs Ahzsbt - Water cooling module for mounting on TOPA protective housing - Climate unit - 12VDC, 40W power supply unit for DIN rail mounting - 6m NBR hose (-20°C to +80°C continuous temperature) - 3m high-temperature cable with temperature sensor - 3m DC connection cable - 250ml coolant concentrate

Condition: excellent (used), functionality: fully functional, Rohde & Schwarz UPV Audio Analyzer with the following options: Rsdpfox H Ucasx Ahzobt UPV-K1 UPV-K4 UPV-U2 UPV-B2 UPV-B3 UPV-B42 UPV-B48 Operating system: Windows XP #8410

Condition: good (used), Rotex / Gradex particle size analysis Particle Size Analysis Rsdpexg Rmxefx Ahzsbt Weight: 1350kg Voltage: 220V

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Rbodpfex El Anjx Ahzst

Condition: used, 2 Carl Zeiss microscopes with accessories Rbsdpeurlprofx Ahzst

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 00051523, Offered for sale: 3D Laser Scanner Brand: VIRTEK LASER QC Model: LPS-1DS Used, in working condition. Collection by the buyer. Assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. Inspection on site possible by appointment. Further metalworking machinery available, such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welders, compressors, etc. – please check my other listings. Domestic price: net plus VAT Rbodpfsx Dbdiex Ahzot or Net export price Collection only – dismantling and transport by the buyer or as agreed. If interested or if you have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim română Viber / WhatsApp / Skype We can handle all customs clearance and registration matters for an additional fee. We can deliver the vehicles to the port for an additional charge.

Condition: good (used), DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operational turnover, improves operations with integrated queuing and collection system through various innovative features of SM-5500B. Experience true retail solutions offered by DIGI's PC scales. - Linerless printing with integrated automatic cutter Rsdpfx Ahek Shm Tezsbt - Watermark printing - Speed ID - InfoTag and electronic signage e.Label - Integrated queuing and collection system - Waste management - Interactive screen display Power source 230 V (50/60 Hz.) Operating humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator Display 12.1" Customer display 7 "WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, dimensions (in mm) 385(W) x 507(D) x 148(H) Item condition: used Photo is purely indicative More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, functionality: unexamined, machine/vehicle number: S/N: 002815GL, 8x Schenck load cells SENSiQ® RTN – 4.7 t – C3 Used, good condition – S/N: 002815GL For sale are eight high-quality Schenck load cells of the SENSiQ® RTN type, each with a capacity of 4.7 tons and accuracy class C3. Rodpfxsxyi Als Ahzjbt The load cells were removed from a fully operational system and are in good, used condition. They have always been handled with care and professionally dismantled.

Condition: used, Measuring system for radiation measurement. Measurement of radioactivity. The stated price is for both devices together. Inspection is possible by appointment at my warehouse! Shipping via freight forwarder is also possible! Rbodpfxjpcfz Nj Ahzst

Condition: used, functionality: fully functional, Several Vega Swing83G1Z5Ex level switches and Vegaflex 62 level sensors for sale. Number of Vega Swing83G1Z5Ex level switches: 32 pcs. (18 pcs. with PN16 DN50 flange / 12 pcs. with 1.5 inch thread / 2 pcs. with 1.0 inch thread) Number of Vegaflex 62 level sensors: 11 units (2 units with PN16 DN50 flange / 9 units with 1.5 inch thread) Vega Swing83G1Z5Ex: Length: 500 mm Type: S83GZO.ZAK050X Vegaflex 62: Type: FX62.CXXGD1HKMXX Rodeu U D Iqepfx Ahzebt The price is 190 Euro per sensor. The price can be negotiated when purchasing several sensors.

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Rodpfx Asxqqlcohzebt Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Vice with 100 mm jaw width

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, table length: 400 mm, table width: 270 mm, machine/vehicle number: 790182, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 400 mm x 270 mm Projector diameter: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,900 mm x 1,500 mm x 2,100 mm Rbsdpfx Aoxqqi Iohzot Weight: 500 kg EQUIPMENT 2-axis digital display from RSF

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, measuring range Y-axis: 1,000 mm, plate length: 1,200 mm, plate width: 800 mm, machine/vehicle number: 1162, No reserve price – guaranteed sale to the highest bidder! The machine is auctioned due to a business closure. Submitting a bid obligates timely collection between 26/01/2026 and 29/01/2026! Rbodpfxsxqqdlj Ahzet TECHNICAL DETAILS Measuring range: up to 1,000 mm Plate dimensions: 1,200 x 800 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,200 x 800 x 2,200 mm Weight: 500 kg EQUIPMENT Granite measuring plate

Condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, total length: 600 mm, total width: 500 mm, total height: 1,600 mm, table diameter: 40 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Diameter of support surface: 40 mm MACHINE DETAILS Rbodjxqnv Ejpfx Ahzjt Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,600 mm Weight: 200 kg