Used mounting technology for sale (158)

Condition: used, Year of construction: 1998, short loader bar diameter 12-72 mm Codpfxsvvuu Ns Agrjhd

Year of construction: 2004, condition: used, Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible. Chsdpfxezzqcvo Agrsd

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment Chodpfex H Ryuex Agrsd SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Chjdpfjylzhlsx Agred

Condition: used, Felsomat gantry robot loading unit with Siemens PLC Cjdpez Hzygjfx Agrohd Swivel-arm loader, 4-axle, table buffer, blow-off station, intermediate storage, s shuttle, Fritz Werner TC 2.5K Rail length 1,500mm. Upright height 2,300mm. With transfer unit.

Year of construction: 2017, condition: ready for operation (used), Reflow oven in operational condition. Ask for additional information. Located within EU. Cjdpfew Hfp Rex Agrohd

Year of construction: 2008, condition: ready for operation (used), Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible. Chedsymfcpjpfx Agrod

Condition: used, Year of construction: 2010, The machine has recently undergone service. Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Otherwise it is operational. Cjdpfxox Tv Rxo Agrehd

Condition: used, Year of construction: 2018, Operational condition machine. Available end of March. Cedpfx Agjyuv Hhjrehd Ask for a quotation!

Year of construction: 2008, condition: ready for operation (used), An industrial Pill micro-etching machine for the micro-etching of printed circuit boards (PCBs) from a PCB manufacturing facility. is offered. Process steps: infeed, micro-etching, rinsing, drying and outfeed, max. working width: 650mm, PCB thickness range: 0.1mm-3.2mm, feed speed: 0.5m/min-3.5m/min, machine dimensions X/Y/Z: approx. 2600mm/1400mm/1300mm. Including a Dataco stacking unit. Documentation available. On-site inspection is possible. Codpfx Ajznx Iajgrjhd

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. Csdjxrgkwepfx Agrjhd • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Csdpjw Dtgrofx Agrohd

Condition: used, The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air volume: 10m³/min x2 exhaust connections, heat-up time: approx. 25min, temperature setting range: room temperature to 300°C, temperature control: closed-loop PID control + SSR, PCB width: 50-450mm, transport height: 950mm +/-20mm, transport speed: 300-2000mm/min, chain lubrication: automatic lubrication, cooling method: forced-air cooling, connected load: 64kW, power consumption during start-up: approx. 35kW, power consumption during normal operation: approx. 8.5kW, length: 5314mm, width: 1417mm, height: 1524mm, weight: 2.25t, 4) Cooling unit (chiller). An on-site inspection is possible. Chsdszwfrdepfx Agrjd

Year of construction: 2016, condition: used, Ask for additional information! Chodpfexy Sphex Agrjd

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Chsdpfx Astz Di Njgrod

Condition: used, Year of construction: 2015, Operational machine - has been in use daily. Vacuum chamber has not been used for the past 1,5 years due to no need. Center support can only be adjusted manually. Chjdpfx Asxlqnysgrod Machine location is EU. Ask for additional information!

Year of construction: 2012, condition: ready for operation (used), An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible. Chodpfx Agowf Nywjrsd

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Cedpfx Agex Ecuxjrshd

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm Cedpoyw Ht Esfx Agrehd max. 8,000 x 2,500 mm

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Csdpfstz Dkyex Agrehd

Condition: like new (used), Automatic Cage Transfer System for Autoclaves Industrial automatic system for the transfer and handling of autoclave cages or baskets, designed for the movement of loads within automated lines for heat treatment, pasteurization, and sterilization. The equipment allows for the automation of the transfer of autoclave cages between the different stages of the process, reducing manual handling and facilitating a continuous and organized flow in the sterilization area. Primarily manufactured from stainless steel, it is designed for industrial food environments and can be integrated with autoclaves, cage loading and unloading systems, conveyors, and other automatic handling equipment. MAIN FEATURES -Type: Autoclave cage transfer system -Application: Automatic handling of cages/baskets -Automated industrial transfer system -Robust construction in stainless steel -Automatic positioning and transfer of cages -Designed for sterilization and heat treatment lines -Suitable for continuous industrial operation -Integrable into existing autoclave installations -Compatible with automatic loading and unloading systems -Reduces the need for manual handling of cages APPLICATION The system is designed to automate the movement of cages used during the heat treatment, pasteurization, or sterilization of packaged food products. It can be part of an automatic autoclave line, transferring and positioning the cages between the different zones of the process. It can be integrated with: Industrial autoclaves Cage and basket handling systems Automatic loaders and unloaders Basket loading and unloading equipment Conveyors and transfer systems Accumulation systems Automatic sterilization lines APPLICATIONS A particularly interesting solution for canning industries, food processing plants, and industrial sterilization facilities that seek to automate the handling of autoclave cages. Suitable for production lines of cans, jars, pouches, trays, and other packaged products that require pasteurization or thermal sterilization in an autoclave. The system allows for improved automation and organization of the autoclave area, reducing manual intervention between the different stages of the process. Machine available for inspection. Csdozwv Amjpfx Agrohd Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Cjdevk R H Rjpfx Agrjhd

Year of construction: 2014, condition: good (used), Machine in operational condition with following specification: Dual-stage 2 x HM Head 2 x ScanCamera 2 x MultiCamera 2 x Nozzle Station 4 x FES32 Chjdpfxevfpmle Agrjd Traceability package Ask for additional information!

Condition: used, functionality: fully functional, Coil winding machine Froitzheim und Rudert Cjdpfxoylydlo Agrehd Winding diameter 250 mm, winding width 500 mm Pneumatic tailstock

Condition: used, more available, ESD tables and side tables, as well as equipment such as oscilloscopes, isolation transformers, etc. Price for one lab table with superstructure and one mobile pedestal Chsdpfey I Uw Tsx Agrjd