Used mounting technology for sale (146)

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Dodjudkz Nepfx Aayeuw

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Duedeudk Amjpfx Aayew

Year of construction: 2012, operating hours: 34,463 h, condition: used, Yamaha stencil printer Duedsudk Dkopfx Aaysw

Condition: excellent (used), Vibratory feeder with linear feeder and sound insulation by California Vibratory Feeders. 110 Volt, 50 / 60 Hz, 2.5 Amp. Was only used for a trial. Equipped with an integrated light barrier on the linear guide rail for switching off the vibratory bowl and an air nozzle for part separation. Dujdpfexrb S Nox Aayjw

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Dodpfexzrflsx Aayeuw Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Year of construction: 2012, condition: ready for operation (used), An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible. Dusdpfxswf Nyws Aayew

Year of construction: 2012, operating hours: 45,517 h, condition: used, Yamaha stencil printer Djdpfx Aoudk Dwoayeuw

Condition: not inspected (used), A short-bar loading system is offered for sale. Manufacturer: Breuning IRCO Dujdpfx Aashpynieyow Type: ILS RBK Approx. 2,200 x 1,000 x 1,350 mm Errors, typos and prior sale excepted.

Condition: new, 1 lot Eaton distribution cabinet and accessories - CI48-200 78896 32 pieces - CI43-150 95506 17 pieces - IM4-CI48 093200 4 pieces - FL4-4 19609 8 pieces Duedpow U Suhsfx Aaysw - 3 pallets, shipping possible at extra cost

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Dodpfx Ajx Ecuxjaysuw

Condition: used, A packaging machine is being sold. Dodsur N Ncepfx Aayeuw The machine can pack goods in boxes or bags.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Computer renewed Software WIN 7 Feeder package: Single feeders: Duodpex Sd Icjfx Aayow 30 pcs 8mm tape 20 pcs 12mm tape 6 pcs 16mm tape 5 pcs 24mm tape Block feeders: 3 pcs 10x8mm tape Tube feeders (via compressed air): 1 pc 20-position 3 pcs 10-position various spare parts

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition Djdpfjx H Ryujx Aayjuw 2D detection of bridges and smearing

Year of construction: 2019, condition: ready for operation (used), Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible. Djdpjuhqchjfx Aayjuw

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Dusdpotz Dkysfx Aayew

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Djdpfxsu Af Abo Aayeuw

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Dsdpfjudk Agsx Aayeuw

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Dodpfxoudk A Hs Aaysuw

Year of construction: 2012, condition: good (used), functionality: fully functional, ASYS Insignum 4000 laser marker Duodpfx Aaoyftg Heysw Year of manufacture: 2012 Last maintenance: 2025 SMEMA interface Automatic width adjustment PCB dimensions: min. 50 x 50mm; max. 460 x 460mm

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Duedpewb E Sbsfx Aayjw

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Dujdpfxotz Di Ns Aaysw