Used Planing & moulding machines for sale (568)

Condition: excellent (used), Functionality: fully functional, Weinig Profimat 22N Four-sided planer Working width 220mm Working height 130mm Number of spindles 4 Spindle arrangement: Bottom 5.5kw Right Left 11w Top 7.5kw Feed speed regulated by means of a variator 6-22m/min Cslq I Dswhpnmo Hzsrb Pneumatic clamps Drive on cardan shafts Infeed table length 1970mm Total power 26.75kw Machine weight 1600kg

Condition: good (used), units span 1350mm two motors 5,5kW feeding from magazine Crolq I Dehqr Aqs Hzeb hydraulic feeder manual regulation of top pressure

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed Cjljwhf Iveq I D Hzorb roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: ready for operation (used), Year of construction: 1998, Brand: Futura Type:Krono SS 180/4 Machine no:98028 Year:1998 4-sided planing in one pass, for e.g. glue joint production or moldings with different profiles etc. Complete with 6 cutters of which 2 are spiralcutters Long infeed table Pneumatic pressure on feed rollers Technical data Infeed table 2000mm long Max size workpiece 180x120mm Min size workpiece 25x8mm Spindle diameter 40mm Tool diameter first spindle 125mm Diameter of pre-mill 145mm Max tool diameter 2nd, 3rd and 4th cutter 180mm Min tool diameter 110mm Spindle speed 6000v/min Feed rate variable 4-20m/min Cjlsv Hf S Hjq I D Hzsrb Feed wheel 130mm in diam with pneumatic pressure Extraction nozzles 138mm in diam Power 400 volt, 50 Hz, 3 phase, 46 Amp Stock no: 2002395

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, Weinig Powermat 2400 (the real follow up model of the Unimat 23EL - strong yellow version) 9 Spindle planer and moulder 230 x 160 mm Feeding speed 6-36 m/min Combination 40 and 50 mm spindles 8.000 RPM spindles Cslewgw Sqjq I D Hzsrb Profile jointer on spindle nr. 4+5 Straight jointer on spindle nr. 9 Short infeed table 1.2 meter Marathon coating for machine tables and fences MemoryPlus system

Condition: excellent (used), Year of construction: 2023, WEINIG Cube 3 Fully automatic 4-sided smooth planer used Planing has never been so easy. In your daily work you need a robust and easy-to-use machine! That is exactly what the CUBE 3 from WEINIG offers. Sophisticated WEINIG technology guarantees strong performance with small dimensions and maximum process reliability. The CUBE 3 thus enables a significantly reduced workload and is the perfect machine for four-sided planing. Simple four-sided planing in perfection - that is the CUBE 3. Our technology - Cast stand on DUROCEM base for the highest processing quality - Compact, solid construction - Large 10" touch panel for machine control - MoulderPreView for workpiece assessment before processing - Energy-efficient extraction - EasyLock knife changing system - Optional interface for stacking machine or return conveyor Your advantages - Perfect right-angled workpieces - Intuitive operation - Fully automatic control - Ten times faster than with planers and thickness planers - Fast dimension change without switching off the machine - Easy knife change - Small space requirement - Comfortable one-man operation possible Crolqsvzb Rns I D Hzob Technical data: Working width: 15 - 260 mm Working height: 5 - 160 mm (at Tool flight circle 125 mm) For a working height of less than 8 mm and more than 5 mm, work is carried out in two steps to avoid impacts. - Step 1: Pre-planing with an oversize of 1.5 mm. - Step 2: Finish planing in thickness planing mode. Example: Desired working height 5 mm. - Step 1: Pre-planing with a working height of 6.5 mm including an oversize of 1.5 mm - Step 2: Finish planing with a working height of 5 mm Chip removal on all machining spindles max: 10 mm Total connected load: 28 KW This includes: 1st spindle 7.5 KW 2nd/3rd Spindle 11 KW 4th spindle: 7.5 KW Feed: 3 x 0.37 KW 2.5 meter infeed table Equipped with Weinig EasyLock planing heads MPV - MoulderPreView Optical projection of the finished dimensions onto the blank before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Optical control Machine operation: The clear software was developed specifically for the CUBE 3. Thanks to the intuitive operation, training is not necessary. What can the CUBE 3 software do: - Large touch panel with 10.1" screen diagonal - Lightning-fast setting of workpiece dimensions - Motorized setting of planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - Continuous setting of the feed speed - 6 to 12 m/min - Choice between planing and leveling - Clear diagnosis using graphics and plain text Automatic lubricant supply for table resin removal, including 5 liters of lubricant. - Controlled by incoming and outgoing wood Central suction diameter: 250 mm Total air requirement m3/h: approx. 3550 Air speed approx. 20 m/s Vacuum pressure: approx. 900 - 1100 PA Total length approx.: 3759 mm Total width approx.: 1430 mm Total height approx: 1704 mm Weight: 2200 kg Location: arrives at warehouse 54634 Bitburg - available approx. June 2025

Condition: used, Year of construction: 1990, machine/vehicle number: 222-1535, Weinig Hydromat 22A 4-sided 7-head planer - 3 Left spindles - 1 Right spindle - 2 Lower spindles - 1 Upper spindle Free space for left spindle Spindle length - 230 mm Spindle diameter 40 mm Speed 6000 rpm Manually controlled feed Soundproof cabin The price is net Dismantling on the buyer's side Colqewhmqxo I D Hzsrb

Condition: ready for operation (used), Working width: 220 mm Working height: 120 mm 4 heads Spindle diameter: 40 mm Stepless feed speed adjustment Star-delta start Two-axis head adjustment Electrically adjustable pressure beam Pneumatic feed roller pressure Spindle speed: 6000 rpm Colswhda Req I D Hzjrb Ribbed table surface

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter Crjlq I D Heu Su Huozjb > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Output table Length: 3500 mm Width: 200 mm Lifting table Cslq I Dsvydwze Hzorb Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: A04-0040, TECHNICAL DETAILS Number of spindles: 9 Additional sanding unit: Yes Multiple processing: 9 spindles allow for comprehensive processing of the wood in a single pass. Surface processing: Sanding unit ensures a smooth and fine surface of the processed wood. Feed rate with sanding: 5-8 m/min Feed rate without sanding: up to 25 m/min Spindle configuration Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: left Spindle 5: left Spindle 6: left Spindle 7: right Spindle 8: top Spindle 9: right Sanding unit: bottom Sanding unit: top MACHINE DETAILS Cslewhlaloq I D Hzerb Dimensions: 8,230 x 1,460 x 2,200 Installation dimensions: approx. 9,276 x 2,630 x 3,000 mm EQUIPMENT Various planing heads expand the machine's flexibility and application possibilities.

Condition: excellent (used), Catalog number 7640 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 2 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA - max planing width 610mm - max planing height 200mm - from above: - input pulling shaft, toothed - pawls - pressure - 2 pulling shafts, toothed - pressure - 610mm planing shaft, 6-knife 15kW - pressures - pulling shaft, smooth, output - from below: - side pressure at the input - guide strip - input table - pulling shaft, toothed - 610mm planing shaft, 6-knife 7.5kW - 2 smooth pulling shafts - side pressure at the outlet - at the back: 2 side spindles + pressures: 1) vertical right 200mm 15kW 2) vertical left 200mm 15kW - left vertical spindle electrically adjustable right/left - spindle diameter 40mm - spindles set alternately - spindles adjustable up/down, right/left 3) additional horizontal lower spindle 160mm, adjustable up/down + right/left 5.5kW Cslq Iswgayqs D Hzorb - spindle diameter 35mm - at the outlet: 2 upper metal sliding rollers, 2 lower pulling rollers, rubber - adjustable rollers in the lower table - electric planing height adjustment - 6 types of feed speeds 12.8/16.3/20/25.6/32.6/40m/min - feed motor 8kW - diameters of the exhaust port 2×120, 2x160mm - dimensions length/width/height 2980x1980x1800mm - weight about 3500kg Net price: PLN 66900 Net price: EUR 15740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: not inspected (used), Year of construction: 2003, Functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Supplied with infeed table (accelerator) and cross conveyor. 6 sets of tools. Table height: 1,100 mm Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Colq Iswhdnbj D Hzorb Connected load: 390 kW

Condition: excellent (used), working width 230mm Coleqfd Dleq I D Hzerb working height 120mm 4 spindles spindles set: dolna/prawa/lewa/górna spindles diameter 40mm pneumatic pressure of feeding rolls table lubrication

Condition: used, Number of spindles 5 St. Working width 220 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 6 kW Feed speed 6-22 m/min. total power requirement 25 kw Dimensions (L/W/H) 3500 x 1500 x 1600 mm weight of the machine ca. 2000 kg 1 WEINIG four-side planer Type PROFIMAT 22 N with 5 spindles ----- Working width 220 mm, working height 120 mm Still in use, can be viewed Spindle arrangement: Celjv Irizsq I D Hzorb 1st spindle bottom 4.0 kW, 2nd spindle right and 3rd spindle left 7.5 kW, 4th spindle top 5.5 kW, 5th spindle bottom 4.0 kW Spindle diameter 40 mm, Feed 3 kW, continuously adjustable from 6 - 22 m/min Special equipment: Cardan drive Profiling package Includes 5 used planer heads. (Technical specifications according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2025, Functionality: fully functional, working width: 250 mm, planing height: 120 mm, spindle diameter: 35 mm, planing width: 240 mm, working height: 120 mm, total width: 1,600 mm, total height: 140 mm, total length: 5,300 mm, overall weight: 3,500 kg, spindle speed (max.): 8,500 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 8,500 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, motor voltage: 380 V, workpiece height (max.): 130 mm, compressed air connection: 6 bar, jointer table length: 2,300 mm, type of input current: three-phase, workpiece width (max.): 250 mm, tool diameter: 125 mm, table length: 2,500 mm, warranty duration: 12 months, number of spindles: 6, power: 7.5 kW (10.20 HP), chip removal: 10 mm, frequency: 50 Hz, chip removal for surfacing (max.): 10 mm, feed roller diameter: 140 mm, worktable width: 250 mm, blade shaft diameter: 125 mm, Equipment: cabin, motor brake, Superset NT with 6 spindles and profile package and 14 axis control with 999 programs available. Position 1. Dressing spindle Position 2. Right vertical spindle 2nd axis (up - down / on - off) Position 3. Left vertical spindle 3rd axis (width adjustment + up - down + setup) Position 4. First horizontal spindle 2nd axis (height adjustment + setup) Crslqjn Nwkrj I D Hzsb Position 5 second horizontal spindle 3rd axis (height adjustment + on-off + setup Position 5 top to horizontal spindle: automatic glass bead separation Position 6 plaster spindle bottom with 2nd axis (on-off + up - down) All spindles with 8500 rpm (pos. 2-3-4-5-6) and pos. 1 with 6000 rpm. Control with color screen with 19" touch screen (14 axis control)

Year of construction: 1990, Condition: not inspected (used), Working width: 180 mm Height: 120 mm Fifth universal spindle Feed table length: 2.47 m Spindle diameter 40 mm Overall length: 4.95 m Depth: 1.64 m Cjlq Ieigzhhe D Hzsrb Height: 1.52

Condition: excellent (used), working width 230mm working height 140mm 6 planning heads + 2 rip saws grooved table pneumatic pressure of feeding rolls variable regulated feeder spindles diameter 40mm two axes heads regulation Crslq I Dsikncaj Hzeb

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. SCM Superset PLUS Comp. 31 also for window production ----- Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment Celq I D Hovnv Uzszsrb 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools Option: SCM RP-S NT transport system for returning the workpiece to the operator, see more Pictures under stock number 6793 (technical data according to the manufacturer - no guarantee!)

Year of construction: 1987, Condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: 1. lower 2. right 3. left 4th top Crslq I D Hslx Em Uszjb 5. universal feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, working width 300mm Crolqevu Saye I D Hzeb working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production Machine is reconditioned and functionally checked ----- Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Crolq Isvf Raas D Hzob Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 22...

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Feed motor 7 kW Feed speed 5-40 m/min. weight of the machine ca. 3100 kg Weinig Powermat 700 still in use, for inspection including suction unit, pipes and motor for the suction unit ----- Brief summary Manufacturer's description: Working width: 20-230 mm Working height: 10-160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 10 - 160 mm (with tool flight circle 93 - 125 mm) 1. spindle ----- First lower horizontal spindle Motor 11 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment travel 17 mm Folding device, including rebate cutter MarathonCoating for table insert in front of 1st lower spindle Electronic digital display for radial adjustment 2. spindle ----- First right vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Colswgwlwoq I D Hzjrb Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Stop lip after the right-hand spindle with quick adjustment Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic. 3. spindle ----- First left vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Easily removable suction hose Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 4. spindle ----- First upper horizontal spindle Motor 11 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm Split pressure shoe in front of upper spindle with horizontal adjustment plane, Adjustable to tool flight circle and swivelling away from the tool, pneumatic Pressure shoe before and after the upper spindle with electronic digital displays digital displays, integrated in the memory function or the PowerCom Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 5. spindle ----- Second upper horizontal spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm ...

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Cslqjwgwmne I D Hzorb Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Crolq I Dowgwmhj Hzeb Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...