Used planing & moulding machines for sale (500)

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Itjdpfxeyqx T Ao Ahvsd Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Itsdpoyu Ii Iefx Ahvod Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Isdpfx Aheyhfhnovjtd Feed speed 60 m/min. Control Memory Plus

Condition: good (used), Code: 0339 Brand: WEINIG Model: PROFIMAT 23/E - CE Standard Automatic 5-spindle moulding machine for the production of frames, furniture parts, windows, doors, moldings, broom handles, wooden toys, and various - CE Standard Features: Heavy-duty base made of solid cast iron Chainless cardan feed: precise, robust, and durable Special feed roller teeth that reduce the depth of entry into the wood Compact feed system Pneumatic pressure on the feed rollers Ijdpsyvut Dsfx Ahvstd DIGISET WEINIG for left and upper spindles: tool adjustment is performed directly via dual digital displays Technical data: Min/max working width 20/230 mm Max working height mm 120 Feed speed variator 5–24 mt/min Shaft diameter mm 40 Shaft speed rpm 6000 Feed roller diameter 140 mm Pre-planing table length 2000 mm Soundproofing and full protective coating Motorized vertical feed adjustment Side roller pressure opposite the first right shaft Motorized upper shaft adjustment Automatic table lubrication Composition: 1° Spindle Lower Planer - Min/max diameter 125–145 mm - Motor 5,5 Hp 2° Spindle Right Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment 3° Spindle Left Vertical Spindle moulder - Min/max diameter 100-200/180 mm - Axial adjustment - Motor power for 2 vertical spindles 7,5 Hp 4° Spindle Upper Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment 5° Spindle Lower Planer - Min/max diameter 100/200 mm - Motor 5,5 Hp - Axial Adjustment N° 5 planing heads included Suction port diameter (N° 5) 140 mm Compressed air 6-8 bar Overall dimensions mm 3400 x 1600 x 1600 h Weight kg 3000

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Itedpfeiiv Dcox Ahvod Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Itsdpsg Umrmofx Ahved Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Four-side planer Weinig Profimat 26S Working width: 230 mm Working height: 130 mm Number of spindles: 6 Spindle configuration: Bottom Left Right Itjdpsyvhkisfx Ahvsd Right Top Bottom Feed speed adjustable by variator CE certificate Technical documentation

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Itodpfx Ahjyvhcfsved Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz Iedpfx Aheyu Iwlevstd - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: used, Year of construction: 2001, Number of spindles 5 St. Itsdpfx Ahoyuzczevod Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed speed 5-24 m/min. Weinig Profimat 26 S Four-Sided Planer ..... Summary: - 5 spindles (bottom, right, left, top, bottom) - Common control of the right spindle (axial), top spindle (axial), and glass bead discharge. - Working width (with a 125 mm tool circle) 20 - 230 mm - Working height (with a 125 mm tool circle) 8 - 120 mm Detailed description: 1. SPINDLE ..... - First lower horizontal spindle - Motor with brake 5.5 kW - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 125 - 145 mm - Axial travel 5 mm - Rebating device - Hardened table insert in front of the 1st lower spindle 2. SPINDLE ..... - First right vertical spindle - Motor with brake 7.5 kW Shared motor with left vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool circle 15 mm below table level 100 - 200 mm - Tool circle 40 mm below table level 100 - 180 mm - Max. tool diameter behind stop level 180 mm - Max. groove depth 35 mm - Axial travel 40 mm - Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment 125 mm 3. SPINDLE ..... - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter 40 mm - Speed ??6,000 rpm - Tool swing circle 15 mm below table level 100 - 200 mm - Tool swing circle 40 mm below table level 100 - 180 mm - Max. Tool diameter behind stop plane 180 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Insert segment 125 mm 4. SPINDLE ..... -First upper horizontal spindle -Motor with brake 7.5 kW -Diameter 40 mm -Speed ??6,000 rpm -Tool swing circle 112 - 200 mm -Maximum groove depth 35 mm -Axially travel 40 mm -Upper horizontal spindle pneumatically controlled axially (40 mm) via selector switch, Max. saw diameter 200 mm -Split pressure shoe in front of upper spindle, adjustable to the tool swing circle and pivoting away from the tool, spring-loaded. - Pneumatically adjustable up/down glazing bead discharge to the upper spindle 5. SPINDLE ..... - Second lower horizontal spindle - Motor with brake 4.0 kW - Diameter 40 mm - Speed ??6,000 rpm - Tooling circle 112 - 200 mm - Maximum groove depth 15 mm All groove spindles dynamically balanced for high concentricity Common control of the right spindle (axial), upper spindle (axial) and glazing bead discharge FEED SYSTEM ..... - Mechanical feed, infinitely variable 5 - 24 m/min. With brake – 2.2 kW -Feed roller in front of the first lower tool, pneumatically controlled "up-down" -Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning -Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm MACHINE ELECTRICAL TECHNOLOGY ..... -Operating voltage 400 volts (voltage range 380–420 volts), 50 Hz -Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1 Other electrical regulations are not c...

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Itodpfx Ahjyutyfjvsd Ex works - Available at short notice -

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3532.724, planing height: 100 mm, planing width: 225 mm, WACO HM200 UNIVERSAL, Planer-Moulder with 7 spindles Year of manufacture: 12/1979 S/N 3532.724 Isdpjyvzx Tjfx Ahvotd Moulding machine with hydraulic feed and powerful spindle. Feed speed: 0-100 m/min Counter bearing on all horizontal spindles. Infeed table: 200 cm Technical specifications: Working area: 225x100 mm (width x height) Bottom spindle max. tool diameter: 160 mm, working length: 210 mm Side spindles (right/left) max. tool diameter: 200 mm, working length: 110 mm Top spindles max. tool diameter: 225 mm, working length: 210 mm Spindle diameter: 45 mm Weight: 10 t

Condition: excellent (used), The main photo is for illustrative purposes. The remaining photos show the actual condition of our planer. More photos can be provided upon request. Four-Sided Planer GUILLIET-O Working width: 220mm Isdpeyvqa Hjfx Ahvetd Working height: 120mm 5 heads Head configuration: bottom/right/left/top/universal Motor power: 5kW/9kW/7.5kW/5.5kW Stepless feed speed adjustment Electric height adjustment (up/down) Manual planing width adjustment Power supply: 380V 1055 operating hours. The machine is fully operational and has been in our company's possession for several years. It is well worth its attention and price. VAT Invoice Transport available.

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 11kW Left 11kW Isdpfx Ahoxcft Ssvstd Top 11kW outboard bearing Right 11kW Left 11kW Top 11kW outboard bearing Bottom 11 kW outboard bearing Bottom 22 kW outboard bearing Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. Large quantity of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) Itsdpfx Ahexqh E Heved 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Itedot Hk Atopfx Ahvjd

Condition: good (used), Year of construction: 2003, functionality: fully functional, Weinig Hydromat 23C four-side planer moulder Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2003 Spindle configuration: 5 spindles Configuration: bottom, right, left, top, bottom Machine description: For sale: Weinig Hydromat 23C four-side planer moulder, year 2003, equipped with 5 spindles in bottom, right, left, top, bottom configuration. This is a solid and proven industrial machine designed for four-side planing of solid wood, production of moulded parts, timber sections, strips, joinery components and furniture elements. The Hydromat 23C is known for its stable construction, good machining precision and suitability for continuous industrial production. Typical specifications for this series include working width up to 230 mm and working height up to 160 mm. Market listings for Hydromat 23C also show versions with mechanical or hydraulic feed and variable feed speed. Technical data: - Machine type: four-side planer / moulder - Number of spindles: 5 - Spindle arrangement: bottom, right, left, top, bottom - Working width: up to approx. 230 mm - Working height: up to approx. 160 mm - Series configuration range: from 5 to 10 spindles Itsdpfx Asyu Uqrehved - Standard feed speed: approx. 6–36 m/min Features and advantages: - Solid industrial construction - Proven Weinig technology - Good machining quality - Suitable for continuous production - Good solution for serial timber processing - Universal 5-spindle arrangement for planing and profiling Condition: Used machine Note: Technical details may vary depending on the exact machine configuration, motor powers, spindle diameters, feed system and optional equipment.

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) Itedpfjq Au Tlsx Ahvod 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: used, Four-sided planer SCM SUPERSET NT, Itedpfx Aheyu Thvjved max. width 240 mm, max. height 120 mm, feed with frequency inverter 5–25 m/min, 5 spindles, spindle diameter 40 mm, infeed table length 2500 mm, year of manufacture 2024.

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: Itedpoytf Nvofx Ahvsd - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW Isdpfx Ahsytdmyevstd - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm Itsdpfxeyuw Rne Ahvod 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included Itodpfx Aexwytishvjd 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: Itsdpfx Aox Rc Hnehvod - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 6575 Isdpfx Aoyr Ry Djhvstd TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal, 230 mm, 11 kW 2) Right vertical, 170 mm 3) Left vertical (spindle 2 & 3), 170 mm, 11 kW 4) Right horizontal, 170 mm, 5.5 kW 5) Upper horizontal, 230 mm, 11 kW 6) Lower horizontal, 230 mm, 7.5 kW 7) Universal, 230 mm, rotatable 360°, 7.5 kW - All spindles adjustable up/down, left/right - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - From above: 4 driven infeed rollers, toothed, including 1 double roller - From above: 1 double rubber driven infeed roller - From above: 1 double rubber driven outfeed roller - From below: 2 metal driven feed rollers, smooth - From below: 1 double rubber driven feed roller - Feed via Cardan shafts - Pneumatically loaded feed rollers - Infinitely variable feed speed: 6-24 m/min - Feed drive motor: 5.5 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction port diameter: 7 x 140 mm - Dimensions (L/W/H): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – For wet and dry timber – Used planer, in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)