Used Mills for sale (97)

Year of construction: 2024, Condition: like new (used), Functionality: fully functional, Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabinet everything fitted on a frame, product fines collecting barrel and vacuum cleaner with filter. REMARK: The user must provide an on site operating platform for the operator to safely handle the feed material and feed it in to the mill. This is NOT part of our scope. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Cgs Iasv Dalps Ud Enjt Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 160210-285, space requirement width: 939 mm, space requirement length: 851 mm, space requirement height: 1,368 mm, Frewitt FreDrive‐Lab Mill in excellent condition. The mill was barely used (less than 10 operations). With its interchangeable milling heads, this is the ideal multi-purpose platform for the laboratory or small-scale production. Incl. complete documentation (442 pages, digital, incl. wiring diagram, declarations of conformity, calibration data, etc.) Made in Switzerland, 2016 Includes: • Three milling heads: - HAMMERWITT‐LAB: High-performance hammer mill incl. electric dosing feeder. Ideal for coarse to fine size reduction of hard, crystalline, or brittle materials - CONIWITT‐LAB: Conical high-performance sieve mill. Ideal for gentle milling of heat-sensitive or fragile materials. Uniform particle size distribution while minimizing fines and heat generation. Cgj Iovahukea Ud Enst - OSCILLOWITT‐LAB: Vibratory and rotary mill. Ideal for processing of heat-sensistive, free-flowing, fine, or powdery materials. Gentle handling and uniform particle distribution without aggressive impact. - Various sieves (see pictures) - Replacement seals and o-rings - Original Frewitt Toolbox - Baskets for transportation (stainless steel table on pictures is not included) Technical specifications: 400V (CEE 16A plug) / 50Hz Speed (rpm) Head HW-Lab: 2'500 - 15'000 Speed (rpm) Head CW-Lab: 1'000 - 6'500

Year of construction: 2015, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Cgj Ia Uef H Akbod Enot Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task. Additionally the gap between the rotor and the sieve can be adjusted. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates Motor: 4kW

Year of construction: 2005, Condition: like new (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Cgs Iajfkgxme Ud Enot Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates

Year of construction: 1996, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Cs Ia Udehrndmj Enogt Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical data: Material of construction: cast iron/mild steel Non pressure shock resistant (NPSR) Scope: Mill with installation table, 30kW motor and suction tank

Year of construction: 2008, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Cgs Iasi Ezf Ss Ud Enot Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 400 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: cast iron Wide chamber design, for processing greasy, oily, sticky materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 400 with pin discs and motors

Year of construction: 2023, Condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Ce Ia Udom Nbnre Enogt Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2002, Condition: reconditioned (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Pharma design, in stainless steel: product contacted parts AISI 316/316L gas contacted parts at least AISI 304 non contacted parts stainless steel Gas recirculation, suitable for inert N2 operation non pressure shock resistant (NPSR) TO BE CONFIRMED Scope of supply Pharmaceutical system comprising: feed material container docking station with dosing screw, rotary valve, 160 UPZ mill in tangential discharge design and installed on a mobile platform, with a 7,5kW motor isolated from the mill production area, piping, filter and discharge closing valve, heat exchanger, blower, platform with stairs, etc. TO BE CONFIRMED A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Cgo Iajrvil To Ud Enjt Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2010, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Cj Ia Udjgulqhe Enjgt Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower

Year of construction: 1997, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Cge Iajg Uwa Ne Ud Enet Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air flow rate. The ACM is thus ideally suitable for processing temperature-sensitive products. • Deflection zone in grinding chamber cover: classifier gap rinsing not necessary. • Low noise emission. • Smooth running characteristics as a result of the belt-driven grinding disc. • Simple to maintain: motors and bearings easily accessible. • Cover lifting device ensures fast access to the grinding and classifying zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Optional: wear-protected design. Mill drive: 22 kW Mill speed: 5.100 rpm Classifier drive: 5,5 kW Classifier speed: 4.900 rpm Air volume: 2.700 Nm/m³

Year of construction: 2008, Condition: used, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Non pressure shock resistant (NPSR) Scope: Cs Ijhrnc Eoa Ud Enogt Hosokawa Alpine 250 UPZ, with 11kW motor, a set of grinding tools of choice, with installation table and suction tank.

Year of construction: 2022, Condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Cs Ia Uoh Utyrod Enogt Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Year of construction: 2003, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG 400 classifier jet mill for the ultrafine grinding of different products with a sharp top cut. This pulveriser allows the fine comminution of products in the bottom chamber of the machine. Thanks to the different nozzles, the pressurized air reduces the product size to the desired one. The top part is fitted with air classifiers that ensure the required top cut of the end product. This results on a narrow particle size distribution (PSD). Different settings allow to adjust the fine product on the go. This unit is suitable to process many different products for all kind of industries, like minerals, chemicals, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Non pressure shock resistant (NPSR) Scope: Bare Hosokawa Alpine 400 AFG fluidised bed classifier jet mill with ATP classifier head Cgo Ia Ud Ejiffrwsnjt

Year of construction: 1996, Condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill Cgj Ia Udskqlf Se Enst A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 1991, Condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Co Ia Uslgy U Njd Ensgt Material of construction: mild steel Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 1986, Condition: defective spare-parts repository (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Made of stainless steel Unit has stainless steel plate beater and screen fitted Non Pressure Shock Resistant (NPSR), non gas tight Scope of supply Mill with 18,5kW motor and a set of grinding tools of choice A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Cgj Ia Udsrvh T Us Enet Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2014, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the nozzles inject compressed gas at high pressure onto the fluidized bed full of feed material and the resulting jet projects the particles against each other breaking them thus reducing their side. The comminution takes place in the center of the chamber far from the mill housing, hence resulting in extreme low wear within the grinding chamber turning this mill optimal for abrasive materials or those that require very low contamination in the final product. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the great required process air volume, very limited temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the compressed gas pressure, grinding nozzle diameter or its design and the classifier wheel speed, air volume, filling level and feeding rate, etc. Technical details Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert gas operation (N2) Stainless steel, with wear protection (ceramic and Vulkollan) Scope of supply Hosokawa Alpine AFG 140 system comprising: dosing, butterfly valve, jet mill, filter, butterfly valve, blower, process gas distributor, controls and supporting structure. A HOSOKAWA ALPINE Originals machine Cgj Ia Ud Esr Dcizjnjt Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2021, Condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Cgo Ia Uef H Azgod Enot Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Construction material: stainless steel

Year of construction: 2000, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 28/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical data: Material of construction: cast iron Non Pressure Shock Resistant (NPSR) Scope: Used Hosokawa Alpine Rotoplex RO 28/60 with motor and internal grinding tools. Ce Ia Udoiuxw Uo Enegt

Year of construction: 2022, Condition: like new (used), Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc. and can be exchanged on the same platform at any time. Dry grinding and classifying Depending on the function module, 1 or 2 identical high-speed motors are used for dry grinding and classifying, except the Piconizer. Wet grinding The wet mill uses a slower running motor with high torque. The drive controller of the motor is located in the platform. Mixing and particle design The batch mixer and the high-energy mixer for particle design use the same slow-running motor with high torque. The motor drive controller is also housed in the platform. THE ACCESSORIES Cgj Ia Udsd S D Uue Enot Depending on the operating mode (continuous, discontinuous) and the batch size, numerous peripheral devices such as agitator vessels, dosing devices, product separators, external blowers or barrier pressure systems are available as an option and are designed for specific applications. The machine was operated as a pilot plant. There are also many modules and many accessories available for purchase or rent.

Year of construction: 2006, Condition: as good as new (ex-display), Fully refurbished Hosokawa Alpine AHM 90 used system by Alpine Originals Unit available for rental as well. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close circuit and batch mode of good flowable suspensions where high end-product fineness even in nano range are required. The fine grinding takes place in a liquid with the aid of a bed of agitated milling beads. The mill is suitable for different products such as chemicals, minerals, pcc, dental ceramics, foodstuffs, metals, pigments and paints, laboratory, nano particles, abrasives, pharmaceutics for submicron and nano-scale milling. Technical details Ce Ia Ujffqi Hjd Enogt Stainless steel, non ATEX Scope of supply Wet mill Hosokawa Alpine AHM 90, grinding tools and grinding media A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply Cge Ieq Rv E Dsa Ud Enst 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2023, Condition: good (used), Functionality: fully functional, Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the grinding track. This liner breaks the particles reducing their size. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Cge Iajrvh Szj Ud Enjt Technical details Stainless steel AISI 304, parts in contact with the product wear protected (Al2O3/Vulkollan) Non Pressure Shock Resistant (NPSR), non ATEX, standard design Scope of supply Complete stand alone ACM mini system comprising: dosing screw, classifier mill ACM 2 EC, cyclone and filter with collecting bins, HEPA filter and blower. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2023, Condition: like new (used), Functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) Ce Ia Uder Iig So Enogt The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Year of construction: 2024, Condition: new, Functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel Cge Ia Udsugfn Ae Enjt - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery