Condition: used, Vötsch Duelrevfddfecrhhjt Type: VT 7011 Heraeus Vötsch temperature chamber air-cooled Test chamber volume 110 liters Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm External dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ±0.1 to ±0.5 K Spatial temperature deviation ±0.5 to ±1.5 K Temperature gradient 1 to 3 K Temperature change rate cooling 3.2 K/min Temperature change rate heating 3.5 K/min Refrigerant: R-404 A / R 23 Voltage 1/N/PE AC 230V±10% 50Hz Nominal power 1.8 kW Rated current 12 A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Anton Paar Type: Physica MCR 101 Rheometer Dolrcreubxh Sehhsut Description: The device is used for the rheological characterization of various substances. Both tension and creep tests can be carried out. Oscillatory and rotatory measurements can also be carried out. There are various measuring geometries for characterizing low-viscosity and highly viscous fluids as well as emulsions and suspensions. There is also a device for DMTA analysis and a measuring cell (biconus) for the characterization of interfaces. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Dslrcjiz Tqcjrhhjut Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Duoljklv H Ijrcrhhst Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White Type: T/210/40/3 Technical data: Air-cooled Cooling/heating operation: -40°C...+180 °C Temperature change rate: Cooling: approx. 3.1 K/min Heating up: approx. 2.5 K/min Temperature deviation temporal ±0.2 to ±0.5 spatial ±0.5 to ±1.5 External dimensions: 1640 x 850 x 1290 mm Test chamber dimensions: 630 x 560 x 570 mm Test chamber volume 201 liters The supply voltage is Power supply 230 V (+-10%) 1/N/PE AC 50 Hz. Rated current: 7A Nominal output: 1.5 kW Refrigerant: R449A Weight 325 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) Djlrcrhjrz Rl Rehjut We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Duolrcjtzbzcsrhhst Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: Duolrstzbz Ajcrhhst 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Dujlrsuuaryjcrhhjt

Condition: excellent (used), Heraeus Vötsch climatic chamber Here we offer you a Heraeus Vötsch climatic chamber. Vötsch climatic chamber VCS 7033 water cooled Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min. Cooling 6,5 K/min. Humidity range: 10% to 98% r.H. Temperature deviation temporal ± 0.5 K Temperature deviation time-related ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x depth 1565 mm x height 1840 mm Lateral feedthrough 90mm ∅ approx. 330 L Weight: 600 kg voltage: 3/N/PE AC 400V ±6/-10% 50Hz rated power 9,5 kW Rated current 17 A Refrigerant R404A / R23 Type: VCS 7033 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) Duslrcropz H Hxohhet (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Djlrsqwim Eocrhheut Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Djlrcrheqmn A Njheut Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), IVA Engineering Type: M5386 Environment and stability chamber Dry Hot Air Test Chamber Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: Djlrcred Nfrlshhsut (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2016, Condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Delrjgkglxjcrhhjut Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch temperature chamber LN2 cooled (liquid nitrogen) Temperature chamber is operated with liquid nitrogen (cooled down) Temperature range -60°C to +180°C Test chamber dimensions: Depth: 575 mm Width: 550 mm Height: 645 mm Duolrsh Rd Idocrhhot Outer dimensions. Depth: 1465 mm Width: 830 mm Height: 1740 mm Test chamber volume 200 liters Mains voltage: 400V ±6/10% 3/N 50Hz Rated power : 17KW Rated current : 29A Weight approx. 350 kg Type: HT 6020/S For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch temperature and climate test chamber Here we offer a Heraeus Vötsch temperature cabinet. Heraeus Vötsch temperature chamber air cooled Test chamber volume 110 liters Dsleh Agt Ssrcrhheut Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm Outer dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ±0.1 to ±0.5 K Temperature deviation spatial ±0.5 to ±1.5 K Temperature gradient 1 to 3 K Temperature change rate cooling 3.2 K/min Temperature change rate heating 3,5 K/min Refrigerant: R-404 A / R 23 Voltage 1/N/PE AC 230V±10% 50Hz Rated power 1,8 kW Rated current 12 A Type: VT 7011 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 10 kVA Heating power: 9 kW Nominal temperature: 250°C weight: 300 kg Delrcrhsigg Eushsut Type: KU 250/09-06-06 K1030852 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eliog Here we offer you a chamber circulating air furnace. Usable space dimensions : Height mm 1250 / Width mm 750 / Depth mm 750 Liters : 703 Outer dimensions : height mm 2050 / width mm 1495 / depth mm 1180 Connected load : 3X400V 50 Hz 10 kVA Delrcrhoiivgnohsut Heating power: kW Nominal temperature: 250°C weight: 500 kg Type: KU 250 / 12-07-07 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Duelrcehv Ru Sjrhhot Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Duslrcrem Tvyxohhet Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x depth 450 mm x height 750 mm Housing dimensions: Width 900 mm x depth 1550 mm x height 1850 mm Temperature test: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Dujlrcrhen E Sk Eshot Temperature change rate: cooling 7.5 K/min Test chamber volume: 190 liters Nominal voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters Duslrcrsiwyiwshhet mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber Here we offer a Weiss temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test chamber designation: WT1-600/70 Outer dimensions without hinges and door lock height 1980 mm, width 1085 mm, depth 1655 mm Internal dimensions height 950mm, width 800mm, depth 800mm Test chamber capacity: approx. 600 liters cold / heat operation -70 to 180°C Temperature change per time cooling approx. 2,5 K/min Heating up approx. 4 K/min Dolrcoirmg Ajrhhjut 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible test material weight Total load of grate supports 80kg Refrigerant: R 404A +R23 Weight: 600kg Type: WT1-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Thermotron temperature chamber Here we offer you a Thermotron temperature chamber. Water cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0,5°C Duslrcreirmitjhhot Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Infeed dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32,4 A Refrigerant: R-404A / R23 Approx. weight: 862 kg Type: Thermotron SE- 1000-5-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) Duelrcrek H Akgohhot (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature and climate test chamber. Heraeus Vötsch temperature and climate test chamber with Simcon/32-NET controller and Hyfra cooling water recooler table-top unit VWK/1 TECHNICAL DATA : General specifications: Test chamber capacity: approx. 345 l Weight: 375 kg Data for mechanical stress: maximum total load of the test chamber floor 60 kg of which weighing stone 45 kg Scales + test material approx. 15 kg Storage shelves 3 kg Permissible load per shelf approx. 100 g Data for operation: Dujlsdyaiiercrhhot RS 232 interface The RS 232 interface is used, for example, for external control via computer. Lighting Operating instructions Safety cabinet Interference emission; interference immunity Standards met see Declaration of Conformity Nominal voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 5 kW Rated current 9 A Customer-side fuse 16A slow-blow Noise measurement: Sound pressure level measured at a distance of 1 m from the front, 1m height and free-field measurement approx. 58 dB(A) Data for temperature tests: Temperature +20 to +30 °C Temperature fluctuation over time in the middle of the usable space ± 1 K Heat compensation 100 W Data for climate tests: Data for humidification system Water tank capacity approx. 10 l Water quality demineralized pH value 6 - 7 Conductivity max. 10 μs/cm Temperature +20 to +30 °C Humidity 30 to 70 % r.h. Dew point +9.5 °C / +21 °C Temperature fluctuation over time in the middle of the usable space (in steady state, according to IEC 60068-3-5) ± 3 K Type: VC 350 LAF/S Hyfra cooling water recooler table-top unit VWK/1 Plug-in units in air-cooled design. Cooling capacities from 0.8 to 3.5 kW Technical data for small appliances in table-top design VWK 7/1-S Cooling capacity 814W Air flow rate 500 m 3/h Pump type LNY 2841 Compressor output 0.27 kW Connected load 0.58 kW Maximum current consumption 6.2 A Maximum back-up fuse 10 A Current type 1/N/PE ~ 50 Hz 230 V Control voltage 230 V / 50 Hz Tank capacity 6 liters Water connection Plug-in couplings 6 and 9 mm Fully hermetic design Cooling type air-cooled Length 565 mm , width 440 mm , height 335 mm Type: VWK 7/1-S Scope of delivery. (See pictures) (We reserve the right to make changes and errors in the technical data). We will be happy to answer any further questions you may have on the phone.